14,544 research outputs found
Wave Profile for Breakdown Waves with a Large Current Behind the Wave Front
For analytical solution of breakdown waves with a large current behind the wave front, we employ a one-dimensional, steady-state, three-component (electrons, ions, and neutral particles) fluid model. This project involves breakdown waves propagating in the opposite direction of the electric field force on electrons, anti-force waves (return stroke in lightning); and the electron gas partial pressure is considered to provide the driving force for the propagation of the wave. The basic set of equations consists of the equation of conservation of mass flux, equation of conservation of momentum, equation of conservation of energy, plus Poisson’s equation. The waves are considered to have a shock front. In this study, we examine the possibility and validity of large currents measured and reported by few investigators. Existence of a relationship between wave speed and peak current values is investigated as well.
Existence of a large current behind the wave front alters the equation of conservation of energy and Poisson’s equation, as well as the shock boundary condition on electron temperature. Considering a current behind the shock front, we have made appropriate modifications in our set of electron fluid dynamical equations. Using the modified set of equations and the shock condition on electron temperature, we have been able to integrate the set of electron fluid dynamical equations for current bearing anti-force waves. For a range of wave speeds and with the largest current possible for a specific wave speed, we present the wave profile for electric field, electron velocity, and the ionization rate within the dynamical transition region of the wave for anti-force waves
Viewpoint consistency in Z and LOTOS: A case study
Specification by viewpoints is advocated as a suitable method of specifying complex systems. Each viewpoint describes the envisaged system from a particular perspective, using concepts and specification languages best suited for that perspective. Inherent in any viewpoint approach is the need to check or manage the consistency of viewpoints and to show that the different viewpoints do not impose contradictory requirements. In previous work we have described a range of techniques for consistency checking, refinement, and translation between viewpoint specifications, in particular for the languages LOTOS and Z. These two languages are advocated in a particular viewpoint model, viz. that of the Open Distributed Processing (ODP) reference model. In this paper we present a case study which demonstrates how all these techniques can be combined in order to show consistency between a viewpoint specified in LOTOS and one specified in Z. Keywords: Viewpoints; Consistency; Z; LOTOS; ODP
Performance of N/p silicon and cadmium sulfide solar cells as affected by hypervelocity particle impact
Simulated micrometeoroid impact effect on silicon and cadmium sulfide solar cell performance
Spin-Tunnel Investigation of the Spinning Characteristics of Typical Single-Engine General Aviation Airplane Designs. 1. Low-Wing Model A: Effects of Tail Configurations
The effects of tail design on spin and recovery were investigated in a spin tunnel. A 1/11-scale model of a research airplane which represents a typical low-wing, single engine, light general aviation airplane was used. A tail design criterion for satisfactory spin recovery for light airplanes was evaluated. The effects of other geometric design features on the spin and recovery characteristics were also determined. Results indicate that the existing tail design criterion for light airplanes, which uses the tail damping power factor as a parameter, cannot be used to predict spin-recovery characteristics
A parametric shell analysis of the shuttle 51-L SRB AFT field joint
Following the Shuttle 51-L accident, an investigation was conducted to determine the cause of the failure. Investigators at the Langley Research Center focused attention on the structural behavior of the field joints with O-ring seals in the steel solid rocket booster (SRB) cases. The shell-of-revolution computer program BOSOR4 was used to model the aft field joint of the solid rocket booster case. The shell model consisted of the SRB wall and joint geometry present during the Shuttle 51-L flight. A parametric study of the joint was performed on the geometry, including joint clearances, contact between the joint components, and on the loads, induced and applied. In addition combinations of geometry and loads were evaluated. The analytical results from the parametric study showed that contact between the joint components was a primary contributor to allowing hot gases to blow by the O-rings. Based upon understanding the original joint behavior, various proposed joint modifications are shown and analyzed in order to provide additional insight and information. Finally, experimental results from a hydro-static pressurization of a test rocket booster case to study joint motion are presented and verified analytically
- …