84,930 research outputs found
Self-Diffusion in 2D Dusty Plasma Liquids: Numerical Simulation Results
We perform Brownian dynamics simulations for studying the self-diffusion in
two-dimensional (2D) dusty plasma liquids, in terms of both mean-square
displacement and velocity autocorrelation function (VAF). Super-diffusion of
charged dust particles has been observed to be most significant at infinitely
small damping rate for intermediate coupling strength, where the
long-time asymptotic behavior of VAF is found to be the product of and
. The former represents the prediction of early theories in
2D simple liquids and the latter the VAF of a free Brownian particle. This
leads to a smooth transition from super-diffusion to normal diffusion, and then
to sub-diffusion with an increase of the damping rate. These results well
explain the seemingly contradictory scattered in recent classical molecular
dynamics simulations and experiments of dusty plasmas.Comment: 10 pages 5 figures, accepted by PR
Hydrogen Embrittlement of Aluminum: the Crucial Role of Vacancies
We report first-principles calculations which demonstrate that vacancies can
combine with hydrogen impurities in bulk aluminum and play a crucial role in
the embrittlement of this prototypical ductile solid. Our studies of
hydrogen-induced vacancy superabundant formation and vacancy clusterization in
aluminum lead to the conclusion that a large number of H atoms (up to twelve)
can be trapped at a single vacancy, which over-compensates the energy cost to
form the defect. In the presence of trapped H atoms, three nearest-neighbor
single vacancies which normally would repel each other, aggregate to form a
trivacancy on the slip plane of Al, acting as embryos for microvoids and cracks
and resulting in ductile rupture along the these planes.Comment: To appear in Phys. Rev. Let
Stress-Induced Delamination Of Through Silicon Via Structures
Continuous scaling of on-chip wiring structures has brought significant challenges for materials and processes beyond the 32 nm technology node in microelectronics. Recently three-dimensional (3-D) integration with through-silicon-vias (TSVs) has emerged as an effective solution to meet the future interconnect requirement. Thermo-mechanical reliability is a key concern for the development of TSV structures used in die stacking as 3-D interconnects. This paper examines the effect of thermal stresses on interfacial reliability of TSV structures. First, the three-dimensional distribution of the thermal stress near the TSV and the wafer surface is analyzed. Using a linear superposition method, a semi-analytic solution is developed for a simplified structure consisting of a single TSV embedded in a silicon (Si) wafer. The solution is verified for relatively thick wafers by comparing to numerical results obtained by finite element analysis (FEA). Results from the stress analysis suggest interfacial delamination as a potential failure mechanism for the TSV structure. Analytical solutions for various TSV designs are then obtained for the steady-state energy release rate as an upper bound for the interfacial fracture driving force, while the effect of crack length is evaluated numerically by FEA. Based on these results, the effects of TSV designs and via material properties on the interfacial reliability are elucidated. Finally, potential failure mechanisms for TSV pop-up due to interfacial fracture are discussed.Aerospace Engineerin
Higher-spin strings and W minimal models
We study the spectrum of physical states for higher-spin generalisations of
string theory, based on two-dimensional theories with local spin-2 and spin-
symmetries. We explore the relation of the resulting effective Virasoro string
theories to certain minimal models. In particular, we show how the
highest-weight states of the minimal models decompose into Virasoro
primaries.Comment: 13 pages, CTP TAMU-43/93, KUL-TF-93/9
Recommended from our members
Thermomechanical Reliability Challenges For 3D Interconnects With Through-Silicon Vias
Continual scaling of on-chip wiring structures has brought significant challenges for materials and processes beyond the 32 nm technology node in microelectronics. Recently threedimensional (3-D) integration with through-silicon-vias (TSVs) has emerged as an effective solution to meet the future interconnect requirement. Among others, thermo-mechanical reliability is a key concern for the development of TSV structures used in die stacking as 3-D interconnects. This paper examines the effects of thermally induced stresses on interfacial reliability of TSV structures. First, three-dimensional distribution of the thermal stress near the TSV and the wafer surface is analyzed. Using a linear superposition method, a semi-analytic solution is developed for a simplified structure consisting of a single TSV embedded in a silicon (Si) wafer. The solution is verified for relatively thick wafers by comparing to numerical results From finite element analysis (FEA). The stress analysis suggests interfacial delamination as a potential failure mechanism for the TSV structure. An analytical solution is then obtained for the steady-state energy release rate as the upper bound for the interfacial fracture driving force, while the effect of crack length is evaluated numerically by FEA. With these results, the effects of the TSV dimensions (e.g., via diameter and wafer thickness) on the interfacial reliability are elucidated. Furthermore, the effects of via material properties are discussed.Aerospace Engineerin
On the third critical field in Ginzburg-Landau theory
Using recent results by the authors on the spectral asymptotics of the
Neumann Laplacian with magnetic field, we give precise estimates on the
critical field, , describing the appearance of superconductivity in
superconductors of type II. Furthermore, we prove that the local and global
definitions of this field coincide. Near only a small part, near the
boundary points where the curvature is maximal, of the sample carries
superconductivity. We give precise estimates on the size of this zone and decay
estimates in both the normal (to the boundary) and parallel variables
On the Bergman representative coordinates
We study the set where the so-called Bergman representative coordinates (or
Bergman functions) form an immersion. We provide an estimate of the size of a
maximal geodesic ball with respect to the Bergman metric, contained in this
set. By concrete examples we show that these estimates are the best possible.Comment: 20 page
Fano Effect through Parallel-coupled Double Coulomb Islands
By means of the non-equilibrium Green function and equation of motion method,
the electronic transport is theoretically studied through a parallel-coupled
double quantum dots(DQD) in the presence of the on-dot Coulomb correlation,
with an emphasis put on the quantum interference. It has been found that in the
Coulomb blockage regime, the quantum interference between the bonding and
antiboding DQD states or that between their Coulomb blockade counterparts may
result in the Fano resonance in the conductance spectra, and the Fano peak
doublet may be observed under certain non-equilibrium condition. The
possibility of manipulating the Fano lineshape is predicted by tuning the
dot-lead coupling and magnetic flux threading the ring connecting the dots and
leads. Similar to the case without Coulomb interaction, the direction of the
asymmetric tail of Fano lineshape can be flipped by the external field. Most
importantly, by tuning the magnetic flux, the function of four relevant states
can be interchanged, giving rise to the swap effect, which might play a key
role as a qubit in the quantum computation.Comment: 7 pages, 5 figure
Enthalpies of formation of lanthanide oxyapatite phases
A family of lanthanide silicates adopts an oxyapatite-like structure with structural formula Ln9.33∎0.67(SiO4)6O2 (Ln 4 La, Sm, Nd, Gd, ∎ = vacancy). The enthalpies of solution, DHS, for these materials and their corresponding binary oxides were determined by high-temperature oxide melt solution calorimetry using molten 2PbO·B2O3 at 1078 K. These data were used to complete thermodynamic cycles to calculate
enthalpies of formation from the oxides, ΔHs f-oxides (kJ/mol): La9.33∎0.67(SiO4)6O2 = −776.3 ± 17.9, Nd9.33∎0.67(SiO4)6O2 = −760.4 ± 31.9, Sm9.33∎0.67(SiO4)6O2 = −590.3 ± 18.6, and Gd9.33∎0.67(SiO4)6O2 = −446.9 ± 21.9. Reference data were used to calculate the standard enthalpies of formation from the elements, ΔH0 f (kJ/mol): La9.33∎0.67(SiO4)6O2 = −14611.0 ± 19.4, Nd9.33∎0.67(SiO4)6O2 = −14661.5 ± 32.2, Sm9.33∎0.67(SiO4)6O2 = −14561.7 ± 20.8, and Gd9.33∎0.67(SiO4)6O2 = −14402.7 ± 28.2. The formation enthalpies become more endothermic as the ionic radius of the lanthanide ion decreases
Boost-invariant mean field approximation and the nuclear Landau-Zener effect
We investigate the relation between time-dependent Hartree-Fock (TDHF) states
and the adiabatic eigenstates by constructing a boost-invariant single-particle
Hamiltonian. The method is numerically realized within a full three-dimensional
TDHF which includes all the terms of the Skyrme energy functional and without
any symmetry restrictions. The study of a free translational motion of a
nucleus demonstrates the validity of the concept of boost-invariant and
adiabatic TDHF states. The interpretation is further corroborated by the test
case of fusion of +. As a first
application, we present a study of the nuclear Landau-Zener effect on a
collision of +.Comment: 8 pages, 3 figure
- …