Drive laser system for the DC-SRF photoinjector at Peking University

Photoinjectors are widely used for linear accelerators as electron sources to generate high-brightness electron beam. Drive laser, which determines the timing structure and quality of the electron beam, is a crucial device of photoinjector. A new drive laser system has been designed and constructed for the upgraded 3.5-cell DC-SRF photoinjector at Peking University. The drive laser system consists of a 1064 nm laser oscillator, a four- stage amplifier, the second and fourth harmonic generators, the optical system to transfer the UV pulses to the photocathode, and the synchronization system. The drive laser system has been successfully applied in the stable operation of DC-SRF photoinjector and its performance meets the requirements. 266 nm laser with an average power close to 1W can be delivered to illuminate the Cs2Te photocathode and the instability is less than 5% for long time operation. The design consideration for improving the UV laser quality, a detailed description of laser system, and its performance are presented in this paper.Comment: 6 pages, 8 figures, submit to CP

Electron Bunch Train Excited Higher-Order Modes in a Superconducting RF Cavity

Higher-order mode (HOM) based intra-cavity beam diagnostics has been proved effectively and conveniently in superconducting radio-frequency (SRF) accelerators. Our recent research shows that the beam harmonics in the bunch train excited HOM spectrum, which have much higher signal-to-noise ratio than the intrinsic HOM peaks, may also be useful for beam diagnostics. In this paper, we will present our study on bunch train excited HOMs, including the theoretic model and recent experiments carried out based on the DC-SRF photoinjector and SRF linac at Peking University.Comment: Supported by National Natural Science Foundation of China (11275014

Molecular insights into structural and dynamic properties of water molecules in calcium silicate hydrate nanopores: The roles of pore size and temperature

Calcium silicate hydrate is the primary hydration product of Portland cement and plays a crucial role in determining the strength of cement-based materials. The structural and dynamic properties of water molecules within calcium silicate hydrate nanopores have significant implications for the mechanical and durability performance of these materials. However, the influences of pore size and temperature on the properties of water molecules have not been fully explored. In this work, using molecular dynamics simulations and theoretical analysis, the evolution and mechanisms of the structural and dynamic properties of water molecules in different scenarios with various pore sizes and temperatures are systematically investigated. It is shown that the diffusion coefficients of water molecules increase with both pore size and temperature. Moreover, water molecules have a tendency to adsorb onto calcium silicate hydrate substrates, forming a distinct layered structure. As a result, the water molecules near the surfaces of calcium silicate hydrate substrates exhibit limited mobility, leading to smaller diffusion coefficients compared to those in other regions. Additionally, the distinctions in properties between water molecules and Ca2+ ions are elucidated and the underlying mechanisms behind these differences are also unveiled. The results and findings in this work deepen the understanding of structural and dynamic properties of water molecules within calcium silicate hydrate nanopores, providing valuable insights for improving the mechanical and durability performance of cement-based materials.Document Type: Original articleCited as: Liu, S., A, H., Tang, S., Kai, M., Yang, Z. Molecular insights into structural and dynamic properties of water molecules in Calcium silicate hydrate nanopores: The roles of pore size and temperature. Capillarity, 2023, 8(2): 23-33. https://doi.org/10.46690/capi.2023.08.0

Diversity and characterization of ramie-degumming strains

Ramie (Boehmeria nivea and Boehmeria tenacissima) is a widely used fiber crop. Traditional water retting or chemical boiling method performed in order to extract ramie fiber seriously pollute the environment and severely damage the fiber, so biological method is the general trend of the fiber-extracting industry. Some strains (687), involving 26 genera and 43 species, were collected from the three samples, which produce hydrolyzed circles in the selective culture medium in order to detect the degumming effect and to compare the enzyme activity. Among these strains, 13 of them did not produce cellulase and had a ramie decreasing weight rate above 25 %, which were regarded as efficient ramie-degumming strains named from R1 to R13. R1 to R13 belonged to Amycolata autotrobutylicun, Bacillus subtilis, Clostridium acetobutylicum, Bacillus subtilis, Rhizobium leguminosarum, Bacteroides finegoldii, Streptomyces lividans, Bacillus amyloliquefaciens, Clostridium acetobutylicum, Pseudomonas brassicacearum, Bacillus pumilus, Bacillus licheniformis, Pectobacterium wasabiae respectively. Bacteroides sp., Rhizobium sp. and Pseudomonas sp. were firstly reported to be used in ramie-degumming. At the same time, the pectinase was the key enzyme in the ramie-degumming process