Content Placement in Cache-Enabled Sub-6 GHz and Millimeter-Wave Multi-antenna Dense Small Cell Networks

This paper studies the performance of cache-enabled dense small cell networks consisting of multi-antenna sub-6 GHz and millimeter-wave base stations. Different from the existing works which only consider a single antenna at each base station, the optimal content placement is unknown when the base stations have multiple antennas. We first derive the successful content delivery probability by accounting for the key channel features at sub-6 GHz and mmWave frequencies. The maximization of the successful content delivery probability is a challenging problem. To tackle it, we first propose a constrained cross-entropy algorithm which achieves the near-optimal solution with moderate complexity. We then develop another simple yet effective heuristic probabilistic content placement scheme, termed two-stair algorithm, which strikes a balance between caching the most popular contents and achieving content diversity. Numerical results demonstrate the superior performance of the constrained cross-entropy method and that the two-stair algorithm yields significantly better performance than only caching the most popular contents. The comparisons between the sub-6 GHz and mmWave systems reveal an interesting tradeoff between caching capacity and density for the mmWave system to achieve similar performance as the sub-6 GHz system.Comment: 14 pages; Accepted to appear in IEEE Transactions on Wireless Communication

Simple to Complex Cross-modal Learning to Rank

The heterogeneity-gap between different modalities brings a significant challenge to multimedia information retrieval. Some studies formalize the cross-modal retrieval tasks as a ranking problem and learn a shared multi-modal embedding space to measure the cross-modality similarity. However, previous methods often establish the shared embedding space based on linear mapping functions which might not be sophisticated enough to reveal more complicated inter-modal correspondences. Additionally, current studies assume that the rankings are of equal importance, and thus all rankings are used simultaneously, or a small number of rankings are selected randomly to train the embedding space at each iteration. Such strategies, however, always suffer from outliers as well as reduced generalization capability due to their lack of insightful understanding of procedure of human cognition. In this paper, we involve the self-paced learning theory with diversity into the cross-modal learning to rank and learn an optimal multi-modal embedding space based on non-linear mapping functions. This strategy enhances the model's robustness to outliers and achieves better generalization via training the model gradually from easy rankings by diverse queries to more complex ones. An efficient alternative algorithm is exploited to solve the proposed challenging problem with fast convergence in practice. Extensive experimental results on several benchmark datasets indicate that the proposed method achieves significant improvements over the state-of-the-arts in this literature.Comment: 14 pages; Accepted by Computer Vision and Image Understandin

Building Emotional Support Chatbots in the Era of LLMs

The integration of emotional support into various conversational scenarios presents profound societal benefits, such as social interactions, mental health counseling, and customer service. However, there are unsolved challenges that hinder real-world applications in this field, including limited data availability and the absence of well-accepted model training paradigms. This work endeavors to navigate these challenges by harnessing the capabilities of Large Language Models (LLMs). We introduce an innovative methodology that synthesizes human insights with the computational prowess of LLMs to curate an extensive emotional support dialogue dataset. Our approach is initiated with a meticulously designed set of dialogues spanning diverse scenarios as generative seeds. By utilizing the in-context learning potential of ChatGPT, we recursively generate an ExTensible Emotional Support dialogue dataset, named ExTES. Following this, we deploy advanced tuning techniques on the LLaMA model, examining the impact of diverse training strategies, ultimately yielding an LLM meticulously optimized for emotional support interactions. An exhaustive assessment of the resultant model showcases its proficiency in offering emotional support, marking a pivotal step in the realm of emotional support bots and paving the way for subsequent research and implementations

Impact study of substrate materials on wireless sensor node RF performance

In this paper, the effect of the substrate on wireless sensor network (WSN) node s RF performance is studied experimentally by using different substrate materials with different thickness. A six-layer FR4 substrate PCB WSN node is fabricated and compared with the original two-layer FR4 PCB node to show the impact of substrate material thickness. Also different substrate dielectric constants impacts are studied by the same method. All these demonstrators are modeling by RF circuit analysis method and simulated in the Ansoft Designer software. Simulation results match the experimental measurement. An optimization method based on simulation for WSN node design with different substrate is presented. This analysis, modeling, simulation and optimization procedure can be carried out on some novel substrate materials such as LTCC and LCP

Miniaturization of wireless sensor network nodes

Wireless sensor network (WSN) node, typically equipped with a radio transceiver, a small microcontroller and a battery, is different from traditional embedded systems because of its requirement of random deployment, small size and low power consumption. Based on these reasons, miniaturization of the WSN nodes becomes increasingly crucial in embedded system design for numerous applications, such as bio-medical monitoring and body network. In this paper, several technologies of different packaging levels to achieve miniaturization and integration are presented, including flip chip packaging of transceiver and micro-controller bare dies, embedded capacitance and epoxy based three dimensional integration technologies. Comparison of the proposed technologies with the original traditional PCB WSN mote is provided. The current experiments and measurements are also presented to show the benefits brought by these technologies not only in shrinking of the mote size, but also some improvements in electrical performance such as reduction of parasitic passives. It is possible to utilizing several different miniaturization technologies for future miniaturized WSN nodes design. Comparison of these technologies in WSN application is provided as conclusion of this paper

Design and implementation of the embedded capacitance layers for decoupling of wireless sensor nodes

In this paper, the embedded capacitance material (ECM) is fabricated between the power and ground layers of the wireless sensor nodes, forming an integrated capacitance to replace the large amount of decoupling capacitors on the board. The ECM material, whose dielectric constant is 16, has the same size of the wireless sensor nodes of 3cm*3cm, with a thickness of only 14μm. Though the capacitance of a single ECM layer being only around 8nF, there are two reasons the ECM layers can still replace the high frequency decoupling capacitors (100nF in our case) on the board. The first reason is: the parasitic inductance of the ECM layer is much lower than the surface mount capacitors'. A smaller capacitance value of the ECM layer could achieve the same resonant frequency of the surface mount decoupling capacitors. Simulation and measurement fit this assumption well. The second reason is: more than one layer of ECM material are utilized during the design step to get a parallel connection of the several ECM capacitance layers, finally leading to a larger value of the capacitance and smaller value of parasitic. Characterization of the ECM is carried out by the LCR meter. To evaluate the behaviors of the ECM layer, time and frequency domain measurements are performed on the power-bus decoupling of the wireless sensor nodes. Comparison with the measurements of bare PCB board and decoupling capacitors solution are provided to show the improvement of the ECM layer. Measurements show that the implementation of the ECM layer can not only save the space of the surface mount decoupling capacitors, but also provide better power-bus decoupling to the nodes

Statistical method of modeling and optimization for wireless sensor nodes with different interconnect technologies and substrates

A comparison study was carried out between a wireless sensor node with a bare die flip-chip mounted and its reference board with a BGA packaged transceiver chip. The main focus is the return loss (S parameter S11) at the antenna connector, which was highly depended on the impedance mismatch. Modeling including the different interconnect technologies, substrate properties and passive components, was performed to simulate the system in Ansoft Designer software. Statistical methods, such as the use of standard derivation and regression, were applied to the RF performance analysis, to see the impacts of the different parameters on the return loss. Extreme value search, following on the previous analysis, can provide the parameters' values for the minimum return loss. Measurements fit the analysis and simulation well and showed a great improvement of the return loss from -5dB to -25dB for the target wireless sensor node

A passive circuit based RF optimization methodology for wireless sensor network nodes

Return loss of wireless sensor network (WSN) node indicates the impedance matching between signal ports of the RF chip and the antenna, and thus shows the transmission efficiency in the signal path. All circuit components, including capacitors, inductors, PCB tracks, packaging parasitic and RF ports were modeled as equivalent passives, to achieve accurate simulation result of return loss of the WSN node. An optimization methodology of return loss was proposed based on the parameter sweep of the equivalent passive network simulation. With the help of the methodology, some critical components' values were changed to obtain optimized RF performance for the wireless node. Measurements matched the analysis and simulation well and showed great improvement

Multi-objective Optimization of Space-Air-Ground Integrated Network Slicing Relying on a Pair of Central and Distributed Learning Algorithms

As an attractive enabling technology for next-generation wireless communications, network slicing supports diverse customized services in the global space-air-ground integrated network (SAGIN) with diverse resource constraints. In this paper, we dynamically consider three typical classes of radio access network (RAN) slices, namely high-throughput slices, low-delay slices and wide-coverage slices, under the same underlying physical SAGIN. The throughput, the service delay and the coverage area of these three classes of RAN slices are jointly optimized in a non-scalar form by considering the distinct channel features and service advantages of the terrestrial, aerial and satellite components of SAGINs. A joint central and distributed multi-agent deep deterministic policy gradient (CDMADDPG) algorithm is proposed for solving the above problem to obtain the Pareto optimal solutions. The algorithm first determines the optimal virtual unmanned aerial vehicle (vUAV) positions and the inter-slice sub-channel and power sharing by relying on a centralized unit. Then it optimizes the intra-slice sub-channel and power allocation, and the virtual base station (vBS)/vUAV/virtual low earth orbit (vLEO) satellite deployment in support of three classes of slices by three separate distributed units. Simulation results verify that the proposed method approaches the Pareto-optimal exploitation of multiple RAN slices, and outperforms the benchmarkers.Comment: 19 pages, 14 figures, journa