23,669 research outputs found
Gauge dilution and leptogenesis
In this paper, we examine how gauge interactions can dilute the lepton
asymmetry in lepton induced baryogenesis. Constraints imposed on Majorana
masses keep this dilution at an acceptable level.Comment: 5 page
A thermal, thermoelastic, and wear analysis of high-energy disk brakes
A thermomechanical investigation of the sliding contact problem encountered in high-energy disk brakes is described. The analysis includes a modelling, using the finite element method of the thermoelastic instabilities that cause transient changes in contact area to occur on the friction surface. In order to include the effect of wear at the contact surface, a wear criterion is proposed that results in the prediction of wear rates for disk brakes that are quite close to experimentally determined wear rates. The thermal analysis shows that the transient temperature distribution in a disk brake assembly can be determined more accurately by use of this thermomechanical analysis than by a more conventional analysis that assumes constant contact conditions. It also shows that lower, more desirable, temperatures in disk brakes can be attained by increasing the volume, the thermal conductivity, and, especially, the heat capacity of the brake components
Fabrication and wear test of a continuous fiber/particulate composite total surface hip replacement
Continuous fiber woven E-glass composite femoral shells having the ame elastic properties as bone were fabricated. The shells were then encrusted with filled epoxy wear resistant coatings and run dry against ultrahigh molecular weight polyethylene acetabular cups in 42,000 and 250,000 cycle were tests on a total hip simulator. The tribological characteristics of these shells atriculating with the acetabular cups are comparable to a vitallium bal articulating with an ultrahigh molecular weight polyethylene cup
Quasi-optimum design of a six degree of freedom moving base simulator control system
The design of a washout control system for a moving base simulator is treated by a quasi-optimum control technique. The broad objective of the design is to reproduce the sensed motion of a six degree of freedom simulator as accurately as possible without causing the simulator excursions to exceed specified limits. A performance criterion is established that weights magnitude and direction errors in specific force and in angular velocity and attempts to maintain the excursion within set limits by penalizing excessive excursions. A FORTRAN routine for relizing the washout law was developed and typical time histories using the washout routine were simulated for a range of parameters in the penalty- and weighting-functions. These time histories and the listing of the routine are included in the report
Tribological characteristics of a composite total-surface hip replacement
Continuous fiber, woven E glass composite femoral shells having the same elastic properties as bone were fabricated. The shells were then encrusted with filled epoxy wear resistant coatings and run dry against ultrahigh molecular weight polyethylene acetabular cups in 42,000 and 250,000 cycle wear tests on a total hip simulator. The tribological characteristics of these continuous fiber particulate composite femoral shells articulating with ultrahigh molecular weight polyethylene acetabular cups were comparable to those of a vitallium ball articulating with an ultrahigh molecular weight polyethylene acetabular cup
Moving-boundary problems solved by adaptive radial basis functions
The objective of this paper is to present an alternative approach to the conventional level set methods for solving two-dimensional moving-boundary problems known as the passive transport. Moving boundaries are associated with time-dependent problems and the position of the boundaries need to be determined as a function of time and space. The level set method has become an attractive design tool for tracking, modeling and simulating the motion of free boundaries in fluid mechanics, combustion, computer animation and image processing. Recent research on the numerical method has focused on the idea of using a meshless methodology for the numerical solution of partial differential equations. In the present approach, the moving interface is captured by the level set method at all time with the zero contour of a smooth function known as the level set function. A new approach is used to solve a convective transport equation for advancing the level set function in time. This new approach is based on the asymmetric meshless collocation method and the adaptive greedy algorithm for trial subspaces selection. Numerical simulations are performed to verify the accuracy and stability of the new numerical scheme which is then applied to simulate a bubble that is moving, stretching and circulating in an ambient flow to demonstrate the performance of the new meshless approach. (C) 2010 Elsevier Ltd. All rights reserved
Meteor Showers or Heat Waves? Heteroskedastic Intra-Daily Volatility in the Foreign Exchange Market
This paper defines and tests a form of market efficiency called market dexterity which requires that asset prices adjust instantaneously and completely in response to new information. Examining the behavior of the yen/dollar exchange rate while each of the major markets are open it is possible to test for informational effects from one market to the next. Assuming that news has only country specific autocorrelation such as a heat wave. any intra-daily volatility spillovers (meteor showers) become evidence against market dexterity. ARCII models are employed to model heteroskedasticity across intra-daily market segments. Statistical tests lead to the rejection of the heat wave and therefore the market dexterity hypothesis. Using a volatility type of vector autoregression we examine the impact of news in one market on the time path of volatility in other markets.
THE CAUSES AND CONSEQUENCES OF RURAL IMMIGRANT POPULATION GROWTH, 1950-1990
This study tests whether evidence supports the hypothesis that rural immigrant populations are more sensitive to relative returns to human capital and living costs will be more elastic than those of native-born citizens. An empirically tractable model of incentive to migrate is developed following work of Huang et al (2001). The model is tested using Census data from 1950-1990 for a sample of rural counties from 18 Midwest and South central states. Preliminary results show that residential decisions of the rural foreign-born population are more sensitive to relative returns to human capital and relative costs of living than are native-born populations. Consequently, rural areas can attract immigrants if they offer earnings opportunities relative to housing costs that are superior to urban markets. Fears that immigrants will form a pocket of rural unemployed appear to be unfounded--immigrants will leave if rural job opportunities are not present.Community/Rural/Urban Development, Labor and Human Capital,
- …