34 research outputs found

    A Passive Probe for Subsurface Oceans and Liquid Water in Jupiter's Icy Moons

    Full text link
    We describe an interferometric reflectometer method for passive detection of subsurface oceans and liquid water in Jovian icy moons using Jupiter's decametric radio emission (DAM). The DAM flux density exceeds 3,000 times the galactic background in the neighborhood of the Jovian icy moons, providing a signal that could be used for passive radio sounding. An instrument located between the icy moon and Jupiter could sample the DAM emission along with its echoes reflected in the ice layer of the target moon. Cross-correlating the direct emission with the echoes would provide a measurement of the ice shell thickness along with its dielectric properties. The interferometric reflectometer provides a simple solution to sub-Jovian radio sounding of ice shells that is complementary to ice penetrating radar measurements better suited to measurements in the anti-Jovian hemisphere that shadows Jupiter's strong decametric emission. The passive nature of this technique also serves as risk reduction in case of radar transmitter failure. The interferometric reflectometer could operate with electrically short antennas, thus extending ice depth measurements to lower frequencies, and potentially providing a deeper view into the ice shells of Jovian moons.Comment: Submitted to Icaru

    Compact, lensless digital holographic microscope for remote microbiology

    Get PDF
    In situ investigation of microbial life in extreme environments can be carried out with microscopes capable of imaging 3-dimensional volumes and tracking particle motion. Here we present a lensless digital holographic microscope approach that provides roughly 1.5 micron resolution in a compact, robust package suitable for remote deployment. High resolution is achieved by generating high numerical-aperture input beams with radial gradient-index rod lenses. The ability to detect and track prokaryotes was explored using bacterial strains of two different sizes. In the larger strain, a variety of motions were seen, while the smaller strain was used to demonstrate a detection capability down to micron scales

    The development and applications of a ground-based fiber nulling coronagraph

    Get PDF
    A rotating nulling coronagraph has been built for use on ground-based telescopes. The system is based on the concept of sub-aperturing the pupil of the telescope with two elliptical apertures and combining the resulting two input beams on a single-mode fiber. By a relative π phase shift of the beams, the starlight can be nulled and a relatively faint companion star can be detected. Rotation of the aperture mask on the telescope pupil results in a signal similar to that expected from a space-borne telescope system such as the proposed TPF/Darwin interferometer. The design of the nulling coronagraph and the ancillary systems that are needed, such as the fringe tracker, are described and the potential for observations on telescopes such as the Palomar 200" is discussed. Results of a nulling experiment using a single mode fiber as a beam combiner for broadband light between 1.50 μm and 1.80 μm are shown

    Exploring 5-40 AU scales around AB Aurigae with an upgraded Palomar Fiber Nuller

    Get PDF
    With a null precision of a few 10^(-4) at all azimuth angles inside a field-of-view extending from 35 to 275 mas, the Palomar Fiber Nuller (PFN) is able to explore angular scales intermediate between those accessed by coronagraphic imaging and by long baseline interferometry. We first briefly summarize the recent performance improvements of the PFN (sensitivity, azimuthal coverage, duty cycle efficiency on-sky) over the 2011-2014 time period. Then we report on recent K-band observations of the young pre-main sequence star AB Aurigae obtained with the PFN. It is shown that a mean astrophysical null of 1.52% was detected around AB Aur at all probed azimuthal angles, and this inside a field-of-view corresponding to projected separations between 5 and 40 AU. In addition, we also report a slight ±0.2% modulation in addition to this average null level. The isotropic astrophysical null is indicative of circumstellar emission dominated by an azimuthally extended source, possibly a halo or one or more rings of dust. The modest azimuthal variation may be explained by some skewness or anisotropy of the spatially-extended source, e.g. with an elliptical or spiral geometry, or clumping, but it could also be due to the presence of a point-source located at a separation of ~120 mas (17AU) and carrying ~6*10-3 of the stellar flux

    Robust, compact implementation of an off-axis digital holographic microscope

    Get PDF
    Recent advances in digital technologies, such as high-speed computers and large-format digital imagers, have led to a burgeoning interest in the science and engineering of digital holographic microscopy (DHM). Here we report on a novel off-axis DHM, based on a twin-beam optical design, which avoids the limitations of prior systems, and provides many advantages, including compactness, intrinsic stability, robustness against misalignment, ease of use, and cost. These advantages are traded for a physically constrained sample volume, as well as a fixed fringe spacing. The first trade is not overly restrictive for most applications, and the latter provides for a pre-set assembly alignment that optimizes the spatial frequency sampling. Moreover, our new design supports use in both routine laboratory settings as well as extreme environments without any sacrifice in performance, enabling ready observation of microbial species in the field. The instrument design is presented in detail here, along with a demonstration of bacterial video imaging at sub-micrometer resolution at temperatures down to –15 °C

    ELVIS: A Correlated Light-Field and Digital Holographic Microscope for Field and Laboratory Investigations

    Get PDF
    This is the first of two articles on the Extant Life Volumetric Imaging System (ELVIS) describing a combined digital holographic microscope (DHM) and a fluorescence light-field microscope (FLFM). The instrument is modular and robust enough for field use. Each mode uses its own illumination source and camera, but both microscopes share a common objective lens and sample viewing chamber. This allows correlative volumetric imaging in amplitude, quantitative phase, and fluorescence modes. A detailed schematic and parts list is presented, as well as links to open-source software packages for data acquisition and analysis that permits interested researchers to duplicate the design. Instrument performance is quantified using test targets and beads. In the second article on ELVIS, to be published in the next issue of Microscopy Today, analysis of data from field tests and images of microorganisms will be presented

    A Multi-Modal Volumetric Microscope with Automated Sample Handling for Surveying Microbial Life in Liquid Samples

    Get PDF
    In the study of microbial life, microscopy plays a unique role due to its ability to detect ordered structure, motility, and fluorescence signals. As such it has also recently gained attention in the context of searching for extant life on distant Solar System bodies bearing liquid water. In this paper we introduce a multimodal volumetric microscopy system for potential future spaceflight missions that combines digital holographic microscopy (DHM) and volume fluorescence imager (VFI), which are volumetric imaging methods that provide highresolution, high-throughput examination of liquid samples. DHM provides information on the absorption, morphology, and motility of imaged objects without requiring the use of contrast agents. On the other hand, VFI based on light field microscopy focuses on the fluorescence signals from the sample to observe specific structures dyed with targeted contrast agents or providing unique autofluorescence signals. We also present an autonomous sample handling and data acquisition system to allow for an autonomous mission to distant planets or moons, or for autonomous use in bodies of water on Earth. The full system, named ELVIS, or Extant Life Volumetric Imaging System, is capable of autonomously surveying a liquid sample to extract morphology, motility, and fluorescence signals of extant microbial life

    Vector vortex coronagraph: first results in the visible

    Get PDF
    We report the status of JPL and JDSU ongoing technological developments and contrast results of the vector vortex coronagraph (VVC) made out of liquid crystal polymers (LCP). The first topological charge 4 VVC was tested on the high contrast imaging testbed (HCIT) around 800 nm, under vacuum and with active wavefront control (32x32 Xinetics deformable mirror). We measured the inner working angle or IWA (50% off-axis transmission) at ~ 1.8λ/d. A one-sided dark hole ranging from 3λ/d to 10λ/d was created in polarized light, showing a mean contrast of ~ 2 × 10^(-7) over a 10% bandwidth. This contrast was maintained very close in (3 λ/d) in a reduced 2% bandwidth. These tests begin to demonstrate the potential of the LCP technology in the most demanding application of a space-based telescope dedicated to extrasolar planet characterization. The main limitations were identified as coming from incoherent sources such as multiple reflections, and residual chromaticity. A second generation of improved masks tackling these issues is being manufactured and will be tested on the HCIT in the coming months

    The JWST/NIRCam coronagraph flight occulters

    Get PDF
    The NIRCam instrument on the James Webb Space Telescope will have a Lyot coronagraph for high contrast imaging of extrasolar planets and circumstellar disks at λ=2 - 5 μm. Half-tone patterns are used to create graded-transmission image plane masks. These are generated using electron beam lithography and reactive ion etching of a metal layer on an antireflection coated sapphire substrate. We report here on the manufacture and evaluation of the flight occulters
    corecore