2,544 research outputs found
LCA of the timber sector in Ghana: preliminary life cycle impact assessment (LCIA)
Purpose - Most life cycle impact assessment (LCIA) approaches in life cycle assessment (LCA) are developed for western countries. Their LCIA approaches and characterization methodologies for different impact categories may not be necessarily relevant to African environmental conditions and particularly not for the timber sector in Ghana. This study reviews the relevance of existing impact categories and LCIA approaches, and uses the most relevant for the timber sector of Ghana. Materials and methods - The study reviewed 23 life cycle inventories (LCIs) and LCAs on forestry, timber, and wood products for relevant impact categories and LCIA approaches for their relevance to the specific conditions in Ghana. This study uses an earlier LCI study of the timber industry as a starting point for an additional LCIA. We next performed a correlation and regression analysis to learn whether wood wastes may function as a reasonable single indicator for land use as proxy for biodiversity loss and the other impact categories. Results and discussion - The literature review shows that no LCI or LCA studies were developed for Africa or the tropics. The LCIA approaches in the reviewed LCAs are indeed shown to take their basis in the environmental problems in western countries and characterization methodologies relating to how these problems manifest themselves in the western world. Characterization methodologies for different impact categories in CML-2000 and other LCIA approaches may not be necessarily relevant to African tropical environmental conditions and particularly not for the timber sector in Ghana. This situation hampers the reliability of our LCIA and points to a serious research gap in LCIA development in general. We applied the scientifically well-recognized CML 2000 to the earlier LCI results and characterized the preliminary selected impact categories of global warming, acidification, eutrophication, photochemical oxidant formation, and human toxicity. The correlation analysis indicated that wood waste is indeed strongly correlated with land use as proxy for biodiversity loss and also positively correlated with the other five potential impact results. It can be concluded that wood waste production is a major driving force for biodiversity loss and a sufficiently good single indicator for all other environmental performance indicators in the timber sector of Ghana. Conclusions - This study and the previous LCI paper are pioneering a field not yet explored, since the correct environmental performance indicators are not yet developed or adapted to tropical conditions. The development of LCIA approaches in the tropics may be the start of a never-ending journey in LCA research in Africa, particularly Ghana
Inventory analysis of the timber industry in Ghana
Background, aim, and scope The timber sector, i.e., forestry and timber industry, plays an important role in the socioeconomic development of Ghana through timber products export. Timber production in this sector is associated with increasing environmental burdens in terms of use of materials and energy, production of emissions and waste, and land use changes. The purpose of this study was to compile a comprehensive life cycle inventory (LCI) to identify the most dominant environmental pressures for five major production lines in the timber industry, and to evaluate the influence of the choice of the functional unit on the results (1 m3, 1 kg, and 1 euro). LCA’s of wood typically base their functional unit on volume, but mass or money may be more appropriate for the rather different products considered in this study. Materials and methods The LCI covers five timber production lines, namely, air-dried lumber, kiln-dried lumber, plywood, veneer, and furniture parts. Three functional units were used for this study to identify the most appropriate basis for a fair comparison of the different timber products (functional units were 1 m3, 1 kg and 1 euro). Questionnaires were administered to thirty selected companies in Ghana. These companies provided data about their material uses, energy requirements, and waste production for their operations from 2000 to 2007. The collected data were first converted into total annual average values, and next extrapolated to reflect the national average data for all 104 active companies. Finally, these data were expressed per functional unit for each of the five product lines on the basis of their production outputs (in volume, mass or money according to functional unit applied). Forest land used changes data was taken from the Ghana Timber Industry Development Division. Emissions for the several activities were taken from literature. Results and discussion Land use change for timber production in Ghana between the estimated periods turned out to be 34.0¿×¿103 ha per year, which will lead to complete deforestation in the year 2023 if continued. The total energy consumed by the timber sector per year was estimated at 1.9¿×¿109 MJ per year. The results showed that CO2 emissions by the timber sector activities per year accounted for 745k tons per year and dominate overall greenhouse gases emissions in the timber sector (changes in carbons storage related to land use changes not included). Wood waste by the timber sector accounted for 0.8 million m3 per year. The enormous wastage of wood contributes enormously to the rapid depletion of the country’s timber resources. The choice of the functional unit influences inventory results. The money-based functional unit, which also seems more appropriate for the different products considered, favors the value-added. Value-added products with strict sustainable forest management policy hold a promising future in terms of sustainability for the timber industry in Ghana. Conclusions This study has yielded good quality primary data unique for LCA research in Africa. This will enhance LCA approaches in Ghana, and allows here identification of the main environmental pressures and their dominantly contributing processes in the timber sector. Land use changes due to forestry form a critical issue and require urgent attention. The chosen functional units’ plays a crucial role in the environmental comparison of production line in the timber sector in Ghana. Recommendations and perspectives A comprehensive and transparent inventory for the timber industry provides the industry with an overview of areas in which material and thus economic savings can be made for the good of both environment and the industry finances. Good data keeping in the Ghanaian timber industry will help to build the required research capacity to develop local familiarity and competence in LCA techniques and applying these techniques will help to further certify tropical timber international markets
Learning Hybrid Process Models From Events: Process Discovery Without Faking Confidence
Process discovery techniques return process models that are either formal
(precisely describing the possible behaviors) or informal (merely a "picture"
not allowing for any form of formal reasoning). Formal models are able to
classify traces (i.e., sequences of events) as fitting or non-fitting. Most
process mining approaches described in the literature produce such models. This
is in stark contrast with the over 25 available commercial process mining tools
that only discover informal process models that remain deliberately vague on
the precise set of possible traces. There are two main reasons why vendors
resort to such models: scalability and simplicity. In this paper, we propose to
combine the best of both worlds: discovering hybrid process models that have
formal and informal elements. As a proof of concept we present a discovery
technique based on hybrid Petri nets. These models allow for formal reasoning,
but also reveal information that cannot be captured in mainstream formal
models. A novel discovery algorithm returning hybrid Petri nets has been
implemented in ProM and has been applied to several real-life event logs. The
results clearly demonstrate the advantages of remaining "vague" when there is
not enough "evidence" in the data or standard modeling constructs do not "fit".
Moreover, the approach is scalable enough to be incorporated in
industrial-strength process mining tools.Comment: 25 pages, 12 figure
Recommended from our members
Optimization of low aspect ratio, iron dominated dipole magnets
A study of the optimization of iron dominated dipole magnets with pole face widths comparable or less than the gap size, i.e., low aspect ratio (AR), is conducted using both theoretical and computational approaches. This regime of magnet design is particularly relevant in the context of laser plasma accelerators (LPA) due to unique beam parameters and geometric constraints, namely large energy spreads and the requirement for large apertures to accommodate drive laser passage. The breakdown of commonly employed approximations and rules of thumb in typical AR1 magnet design is examined. A library of generalized, optimized pole face geometries is provided to expedite optimization of future magnets. Finally, this methodology is used to design an electromagnetic chicane which has been fabricated, validated, and is currently in use in an x-ray free electron laser driven LPA experiment at LBNL
Recommended from our members
High-sensitivity plasma density retrieval in a common-path second-harmonic interferometer through simultaneous group and phase velocity measurement
Precise measurements of the plasma density in ionized gas cells and discharged capillaries are critical to the design and operation of plasma-based accelerators, active plasma lenses, and plasma-based radiation sources. In this manuscript, a spectral-domain common-path second-harmonic interferometer is upgraded with the simultaneous measurement of the group and phase velocity, allowing for high-sensitivity density characterization (from the phase velocity advance) without the need for phase tracking from zero-density (enabled by the group velocity delay). The technique is applied to 1.5-cm-long plasma structures, without density ambiguity in parameter scans with >2π phase jumps. The single-shot sensitivity in phase retrieval is demonstrated at 63 mrad, equivalent to a density-length product of 1.8·1015 cm -2 . This is an improvement of ×45 compared to group velocity analysis alone
Expression of Interest ICES/KIS-3 : Thema 4: Hoogwaardig Ruimtegebruik Speerpunt 6
Hoofddoel van dit speerpunt is om zowel de Nederlandse overheid als het bedrijfsleven uit te rusten met een operationele kennisinfrastructuur die toegesneden is op de relatie tussen (antropogene en natuurlijke) klimaatverandering en meervoudig ruimtegebrui
Recursion Aware Modeling and Discovery For Hierarchical Software Event Log Analysis (Extended)
This extended paper presents 1) a novel hierarchy and recursion extension to
the process tree model; and 2) the first, recursion aware process model
discovery technique that leverages hierarchical information in event logs,
typically available for software systems. This technique allows us to analyze
the operational processes of software systems under real-life conditions at
multiple levels of granularity. The work can be positioned in-between reverse
engineering and process mining. An implementation of the proposed approach is
available as a ProM plugin. Experimental results based on real-life (software)
event logs demonstrate the feasibility and usefulness of the approach and show
the huge potential to speed up discovery by exploiting the available hierarchy.Comment: Extended version (14 pages total) of the paper Recursion Aware
Modeling and Discovery For Hierarchical Software Event Log Analysis. This
Technical Report version includes the guarantee proofs for the proposed
discovery algorithm
On Retardation Effects in Space Charge Calculations Of High Current Electron Beams
Laser-plasma accelerators are expected to deliver electron bunches with high
space charge fields. Several recent publications have addressed the impact of
space charge effects on such bunches after the extraction into vacuum.
Artifacts due to the approximation of retardation effects are addressed, which
are typically either neglected or approximated. We discuss a much more
appropriate calculation for the case of laser wakefield acceleration with
negligible retardation artifacts due to the calculation performed in the mean
rest frame. This presented calculation approach also aims at a validation of
other simulation approaches
Recommended from our members
Emittance Measurement and Modeling of the ALS 50 MeV Linac to Booster Line
Hydrogen-powered road vehicles : the health benfits and drawbacks of a new fuel
Because of the political, social and environmental problems associated with dependency on fossil fuels, there is considerable interest in alternative energy sources. Hydrogen is regarded as a promising option, particularly as a fuel for road vehicles. The Dutch Energy Research Centre (ECN) recently published a vision of the future, in which it suggested that by 2050 more than half of all cars in the Netherlands could be running on hydrogen. A switch to using hydrogen as the primary energy source for road vehicles would have far-reaching social consequences. As with all technological developments, opportunities would be created, but drawbacks would inevitably be encountered as well. Some of the disadvantages associated with hydrogen are already known, and are to some degree manageable. It is likely, however, that other drawbacks would come to light only once hydrogen-powered cars were actually in use. With that thought in mind, and in view of the social significance of a possible transition to hydrogen, it was decided that the Health Council should assess the positive and negative effects that hydrogen use could have on public health. It is particularly important to make such an assessment at the present early stage in the development of hydrogen technologies, so that gaps in existing scientific knowledge may be identified and appropriate strategies may be developed for addressing such gaps. This report has been produced by the Health and Environment Surveillance Committee, which has special responsibility for the identification of important correlations between environmental factors and public health
- …