Immobilization of lipase on chitosan beads for removal of pitch particles from whitewater during papermaking

Pitch deposits originating from alkaline peroxide bleaching of mechanical pulps can seriously decrease the runnability of the paper machine when efforts have been made to increase the reuse of process water. In order to degrade pitch particles present in whitewater, lipase was immobilized on chitosan beads using a binary method. The operational stability of the immobilized lipase and its efficacy for treating whitewater were also preliminary studied. The results showed that the highest activity of immobilized lipase was achieved by using 0.5% 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) for activation and 0.0025% glutaraldehyde for cross-linking chitosan. The immobilized lipase also exhibited very good operational stability, and the pitch particles present in whitewater could be reduced by 66.8% after treatment with the immobilized lipase

Anti-mold, self-cleaning superhydrophobic bamboo fiber/polypropylene composites with mechanical durability

Bamboo fiber/polypropylene composites (BPCs) have been widely used in buildings, interior decoration, and automobile components. However, pollutants and fungi can interact with the hydrophilic bamboo fibers on the surface of Bamboo fiber/polypropylene composites, degrading their appearance and mechanical properties. To improve their anti-fouling and anti-mildew properties, a superhydrophobic modified Bamboo fiber/polypropylene composite (BPC-TiO2-F) was fabricated by introducing titanium dioxide (TiO2) and poly(DOPAm-co-PFOEA) onto the surface of a Bamboo fiber/polypropylene composite. The morphology of BPC-TiO2-F was analyzed by XPS, FTIR, and SEM. The results showed that TiO2 particles covered on Bamboo fiber/polypropylene composite surface via complexation between phenolic hydroxyl groups and Ti atoms. Low-surface-energy fluorine-containing poly(DOPAm-co-PFOEA) was introduced onto the Bamboo fiber/polypropylene composite surface, forming a rough micro/nanostructure that endowed BPC-TiO2-F with superhydrophobicity (water contact angle = 151.0° ± 0.5°). The modified Bamboo fiber/polypropylene composite exhibited excellent self-cleaning properties, and a model contaminant, Fe3O4 powder, was rapidly removed from the surface by water drops. BPC-TiO2-F showed excellent anti-mold performance, and no mold was on its surface after 28 days. The superhydrophobic BPC-TiO2-F had good mechanical durability and could withstand sandpaper abrasion with a weight load of 50 g, finger wiping for 20 cycles, and tape adhesion abrasion for 40 cycles. BPC-TiO2-F showed good self-cleaning properties, mildew resistance, and mechanical resistance, giving it promising applications for automotive upholstery and building decoration

Experimental Comparison Study on Cyclic Behavior of Coupled Shear Walls with Two-Level-Yielding Steel Coupling Beam and RC Coupling Beam

[EN] Coupled shear walls are widely used in high rise buildings, since they can not only provide efficient lateral stiffness but also behave outstanding energy dissipation ability especially for earthquake-resistance. Traditionally, the coupling beams are made of reinforced concrete, which are prone to shear failure due to low aspect ratio and greatly reduce the efficiency and ability of energy dissipation. For overcoming the shortcoming of concrete reinforced coupling beams (RCB), an innovative steel coupling beams called two-level-yielding steel coupling beam (TYSCB) is invented to balance the demand of stiffness and energy dissipation for coupled shear walls. TYSCBs are made of two parallel steel beams with yielding at two different levels. To verify and investigate the aseismic behaviour improvement of TYSCB-coupled shear walls, two 1/3 scale, 10-storey coupled shear wall specimens with TYSCB and RCB were tested under both gravity and lateral displacement reversals. These two specimens were designed with the same bearing capacity, thus to be easier to compare. The experimental TYSCB specimen demonstrated more robust cyclic performance. Both specimens reached 1% lateral drift, however, the TYSCB-coupled shear wall showed minimal strength degradation. Additionally, a larger amount of energy was dissipated during each test of the TYSCB specimen, compared with the RCB specimen. Based on the experimental results, design recommendations are provided.The work presented in this paper was supported by the Ministry of Science and Technology of China through the Thirteen Five Key Research & Development Scheme with Grant 2016YFC0701203.Pang, M.; Li, G.; Sun, F.; Li, L.; Sun, J. (2018). Experimental Comparison Study on Cyclic Behavior of Coupled Shear Walls with Two-Level-Yielding Steel Coupling Beam and RC Coupling Beam. En Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018. Editorial Universitat Politècnica de València. 733-738. https://doi.org/10.4995/ASCCS2018.2018.7026OCS73373

Genome-Wide Characterization and Comparative Analysis of MYB Transcription Factors in Ganoderma Species

Numerous studies in plants have shown the vital roles of MYB transcription factors in signal transduction, developmental regulation, biotic/abiotic stress responses and secondary metabolism regulation. However, less is known about the functions of MYBs in Ganoderma. In this study, five medicinal macrofungi of genus Ganoderma were subjected to a genome-wide comparative analysis of MYB genes. A total of 75 MYB genes were identified and classified into four types: 1R-MYBs (52), 2R-MYBs (19), 3R-MYBs (2) and 4R-MYBs (2). Gene structure analysis revealed varying exon numbers (3-14) and intron lengths (7-1058 bp), and noncanonical GC-AG introns were detected in G. lucidum and G. sinense. In a phylogenetic analysis, 69 out of 75 MYB genes were clustered into 15 subgroups, and both single-copy orthologous genes and duplicated genes were identified. The promoters of the MYB genes harbored multiple cis-elements, and specific genes were co-expressed with the G. lucidum MYB genes, indicating the potential roles of these MYB genes in stress response, development and metabolism. This comprehensive and systematic study of MYB family members provides a reference and solid foundation for further functional analysis of MYB genes in Ganoderma species

Morphological and Chemical Characterization of Green Bamboo (Dendrocalamopsis oldhami (Munro) Keng f.) for Dissolving Pulp Production

With the sustained growth of dissolving pulp demand all over the world, the search for alternative bamboo materials has come into focus in China due to the shortage of wood and the abundance of bamboo resources. In this study, to obtain updated information concerning green bamboo growing in southeastern China and to develop its processing technologies for dissolving pulp, the fiber morphology, chemical composition, elemental composition, degree of polymerization (DP) of cellulose, and crystallinity index (CrI) of cellulose were investigated. The experimental results show that green bamboo has potential for use as dissolving pulp because it has a lower Runkel ratio and fines content than moso bamboo, and a much lower lignin content and similar α-cellulose and hemicellulose contents compared to softwoods and hardwoods. Compared to the cortex and culm, the node had the shortest fibers and more than 30% of fines, the highest content of extractives and lignin, and the lowest α-cellulose content. As a result, a de-knotting operation prior to cooking can contribute to the production of high-grade dissolving pulp. The DP and CrI of cellulose from the node were much lower than that of cellulose from the culm and cortex. Moreover, green bamboo had the high content of ash, primarily distributed in the cortex. The concentration of Si was 4487 ppm in the cortex, nearly five times higher than that in the culm and node

Prevention and treatment of lipoic acid-niacin on blue-light-induced retinal damage in rats

AIM: To investigate the preventive effect and optimal drug dose of lipoic acid-niacin(N2L)against blue light-induced retinal damage in SD rats, and to explore its possible protective mechanism.METHODS: A total of 36 specific pathogen free-grade male SD rats of 150-200 g were selected and randomly divided into normal control group, blue light injury group, N2L low-dose group(1.0 mg/kg), N2L medium-dose group(2.5 mg/kg), N2L high-dose group(5.0 mg/kg), and physiological saline group, with 6 rats in each group. The normal control group was reared in a 12 h dark and light cycle, and the rest of the groups received 9 h of daily light exposure, 3 h of blue light irradiation with a wavelength of 455 nm and an intensity of 3000±50 lx, and 12 h of darkness to establish the injury model, and were exposed to light exposure for 14 d. For 14 consecutive durations, a 1 mL dose of the corresponding drug was injected intraperitoneally. The rats were reared for another 5 d with a regular 12 h light-dark cycle and were examined by electroretinography. Specimens were prepared by over anesthesia, HE staining, and the thickness of the outer nuclear layer was observed under a optical microscope; superoxide dismutases(SOD)activity was detected by CheKineTM SOD Activity Assay Kit; and the retinal Caspase-3, quinone oxidoreductase 1(NQO1), glutathione S transferase(GST), Bcl-2, and Bax protein expression in rat retina were detected by Western blot.RESULTS: The amplitude of b-wave in dark-vision ERG 3.0 and 10.0(cd·s)/m2 stimulated light, b-wave in bright-vision ERG 3.0(cd·s)/m2 stimulated light, and the amplitude of the 2nd wave peak of oscillatory potential were significantly lower in blue light injury group than that in the normal control group(all P<0.01), while the amplitude was significantly higher in the N2L medium-dose group than in the blue light injury group(all P<0.05), and was not statistically different from that of the normal control group; the thickness of the retina in the blue light injury group was decreased in the ONL compared with that of the normal control group(P<0.001), while in the N2L medium dose group, it was thicker than that of the blue light injury group(P<0.001), and there was no statistically significant difference from the normal control group; SOD activity was significantly higher in the N2L medium-dose group than in the remaining 5 groups(P<0.05); the expression of Caspase-3, Bax, and NQO1 in the blue light injury group was higher than that of the normal control group(all P<0.01), and expression of Bax and Caspase-3 was significantly lower in the N2L medium-dose group compared with the blue light injury group(all P<0.001), whereas GST, NQO1 and Bcl-2 were significantly increased(all P<0.01).CONCLUSION:A concentration of 2.5 mg/kg N2L can effectively antagonize the damaging effect of blue light on the retina of SD rats, and it is expected to be a preventive and curative drug for it

Flame Retardation Modification of Paper-Based PVC Wallcoverings

The flame-retarded paper-based polyvinyl chloride (PVC) wallcoverings were successfully prepared, using plant fiber paper as base material and adding inorganic flame retardants and flame-retarded plasticizer as additives. Flame retardancy, thermostability, smoke suppression and mechanical properties were tested regarding to the prepared wallcoverings. The results showed that 2ZnO·3B2O3·3.5H2O could improve flame retardancy and thermostability of paper-based PVC wallcoverings; plasticizer tricresyl phosphate increased flame retardancy of the prepared materials auxiliarily. Also, flame-retarded paper-based PVC wallcoverings with higher flame retardancy, smoke suppression and mechanical property was prepared using plant fiber paper with fix quantity of 90 g/m3 as base material, using 2ZnO·3B2O3·3.5H2O as inorganic flame retardant, and using tricresyl phosphate as plasticizer. For the flame-retarded paper-based PVC wallcoverings in this study, the limit oxygen index (LOI) reaches 32.3, maximal smoke density is 16.91 %, and the horizontal and longitudinal wet tensile strength reaches 1.38 kN·m−1 and 1.51 kN·m−1 respectively. Meanwhile, its flame retardancy meets the requirements about flame retardancy for material Class B1 listed in Chinese National Standards GB 8624-2012, Classification for burning behavior of building materials and products. This research creates an effective path to prepare paper-based PVC wallcoverings with high flame retardancy

Flame Retardation Modification of Paper-Based PVC Wallcoverings

The flame-retarded paper-based polyvinyl chloride (PVC) wallcoverings were successfully prepared, using plant fiber paper as base material and adding inorganic flame retardants and flame-retarded plasticizer as additives. Flame retardancy, thermostability, smoke suppression and mechanical properties were tested regarding to the prepared wallcoverings. The results showed that 2ZnO·3B2O3·3.5H2O could improve flame retardancy and thermostability of paper-based PVC wallcoverings; plasticizer tricresyl phosphate increased flame retardancy of the prepared materials auxiliarily. Also, flame-retarded paper-based PVC wallcoverings with higher flame retardancy, smoke suppression and mechanical property was prepared using plant fiber paper with fix quantity of 90 g/m3 as base material, using 2ZnO·3B2O3·3.5H2O as inorganic flame retardant, and using tricresyl phosphate as plasticizer. For the flame-retarded paper-based PVC wallcoverings in this study, the limit oxygen index (LOI) reaches 32.3, maximal smoke density is 16.91 %, and the horizontal and longitudinal wet tensile strength reaches 1.38 kN·m−1 and 1.51 kN·m−1 respectively. Meanwhile, its flame retardancy meets the requirements about flame retardancy for material Class B1 listed in Chinese National Standards GB 8624-2012, Classification for burning behavior of building materials and products. This research creates an effective path to prepare paper-based PVC wallcoverings with high flame retardancy

Flow Stress Behavior of 15%SiC_P/8009 Aluminum Matrix Composite During Hot Compression Deformation

The flow stress behavior of 15%SiCP/8009 aluminum matrix composite at deformation temperature of 400-550 ℃ and strain rate of 0.001-1 s-1 was studied by hot compression testing on the Gleeble-3500 thermal-mechanical simulator. The results show that the flow stress increases initially and reaches a plateau after peak stress value with the increase of strain. The peak stress increases with the increase of strain rate and deformation temperature. The flow stress behavior can be described by the hyperbolic sine constitutive equation with the deformation activation energy Q of 488.3853 kJ/mol and the stress index n of 7.19022