Investigation of the GFR2400 Reactivity Control System

The presented paper is related to the design methods and neutronic characterization of the reactivity control system in the large power unit of Generation IV Gas cooled Fast Reactor – GFR2400. The reactor core is based on carbide pin fuel type with the application of refractory metallic liners used to enhance the fission product retention of the SiC cladding. The heterogeneous design optimization of control rod is presented and the results of rods worth and their interferences in a core are evaluated. In addition, the idea of reflector removal as an additive reactivity management option is investigated and briefly described

NUMERICAL MULTIGROUP TRANSIENT ANALYSIS OF SLAB NUCLEAR REACTOR WITH THERMAL FEEDBACK

The paper describes a new numerical code for multigroup transient analyses with thermal feedback. The code is developed at Institute of Nuclear and Physical Engineering. It is necessary to carefully investigate transient states of fast neutron reactors, due to recriticality issues after accident scenarios. The code solves numerical diffusion equation for 1D problem with possible neutron source incorporation. Crank-Nicholson numerical method is used for the transient states. The investigated cases are describing behavior of PWR fuel assembly inside of spent fuel pool and with the incorporated neutron source for better illustration of thermal feedback

NUMERICAL MULTIGROUP TRANSIENT ANALYSIS OF SLAB NUCLEAR REACTOR WITH THERMAL FEEDBACK

The paper describes a new numerical code for multigroup transient analyses with thermal feedback. The code is developed at Institute of Nuclear and Physical Engineering. It is necessary to carefully investigate transient states of fast neutron reactors, due to recriticality issues after accident scenarios. The code solves numerical diffusion equation for 1D problem with possible neutron source incorporation. Crank-Nicholson numerical method is used for the transient states. The investigated cases are describing behavior of PWR fuel assembly inside of spent fuel pool and with the incorporated neutron source for better illustration of thermal feedback

Comparative study of the MeV ion channeling implantation induced damage in 6H-SiC by the iterative procedure and phenomenological CSIM computer code

Due to its unique material properties, such as extreme hardness and radiation resistance, silicon carbide has been used as an important construction material for environments with extreme conditions, like those present in nuclear reactors. As such, it is constantly exposed to energetic particles (e.g., neutrons) and consequently subjected to gradual crystal lattice degradation. In this article, the 6H-SiC crystal damage has been simulated by the implantation of 4 MeV C3+ ions in the (0001) axial direction of a single 6H-SiC crystal to the ion fluences of 1.359 1015 cm-2, 6.740 1015 cm-2, and 2.02 1016 cm-2. These implanted samples were subsequently analyzed by Rutherford and elastic backscattering spectrometry in the channeling orientation (RBS/C & EBS/C) by the usage of 1 MeV protons. Obtained spectra were analyzed by channeling simulation phenomenological computer code (CSIM) to obtain quantitative crystal damage depth profiles. The difference between the positions of damage profile maxima obtained by CSIM code and one simulated with stopping and range of ions in matter (SRIM), a Monte Carlo based computer code focused on ion implantation simulation in random crystal direction only, is about 10%. Therefore, due to small profile depth shifts, the usage of the iterative procedure for calculating crystal damage depth profiles is proposed. It was shown that profiles obtained by iterative procedure show very good agreement with the ones obtained with CSIM code. Additionally, with the introduction of channeling to random energy loss ratio the energy to depth profile scale conversion, the agreement with CSIM profiles becomes excellent

Criticality Safety Analysis of Spent Fuel Storage Pool for NPP Mochovce using MCNP5 Code

The paper presents results of nuclear criticality safety analysis of spent fuel storage and handling for the 1st and 2nd unit of NPP Mochovce. Spent fuel storage pool (compact and reserve grid) and T-12 transport cask were modeled using the Monte Carlo code MCNP5. Conservative approach was applied and calculation of max eff k values was performed for normal and various postulated emergency conditions in order to evaluate the final maximal max eff k values. The requirement of current safety regulations to ensure 5% subcriticality was met except some especially conservative cases

The Mini Labyrinth - a Simple Benchmark for Radiation Protection and Shielding Analysis

The Mini Labyrinth experiment is a simple neutron and gamma shielding experiment developed at STU, inspired by the ALARM-CF-AIR-LAB-001 ICSBEP benchmark experiment. The STU Mini Labyrinth is approximately ten times smaller and consists of NEUTRONSTOP shielding blocks. This paper describes the second version of the Mini Labyrinth experiment and presents the results of the neutron and gamma fields simulation and measurement. The PuBe neutron source with the emission rate of 1.0E7 n/s was utilized in the experiment. The measurement of gamma ambient dose equivalent H*(10) and neutron count rates is performed by the Thermo Scientific RadEye portable survey meter. The simulation part was carried out using the state-of-the-art MCNP6 and SCALE6 MONACO stochastic calculation tools taking into account the detailed geometry of the labyrinth and combined neutron and gamma source of particles. The comparisons were performed between codes and experiment, based on the dose rate in the unique detection positions and using a 2D map of neutron and photon fluxes. The propagation of cross-section uncertainties was investigated through shielding analysis. Partial agreement between codes and measurement was achieved, however serious discrepancies near the PuBe source were identified

Correlation of the total induced amorphization in SiC crystal with the ion implantation fluence

During the ion implantation process, regardless if it was attentional or not, amorphization will be introduced into the crystal structure. Depending on the chosen ions, different quantities of the amorphization will be introduced for the same applied fluences. In order to estimate the total amorphization of the SiC crystal for different ions and fluences combination, an assessment model was proposed. For this purpose, 4 MeV carbon and silicon ions with multiple fluences were implanted in the [0001] axial direction of a 6H-SiC single crystal. The amorphization depth distributions were obtained by Elastic Backscattering Spectroscopy/channeling spectra analysis via Channeling SIMulation (CSIM) phenomenological computer code. As a result, relation of the total induced amorphization and implantation fluences for carbon and silicon ions were obtained. Based on these experimental results, a total amorphization assessment model for different ions (energy of 4 MeV) and fluences combination was established.X Serbian Ceramic Society Conference - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts; September 26-27, 2022; Belgrad

Unmanned Radiation Monitoring System

The absence of online radiation monitoring systems has been observed in the case of Fukushima nuclear accident. As the tsunami destroyed 23 of the 24 status monitoring points, almost no relevant radiation dose measurements data were available. A rapid deployment of a mobile radiological unit that can quickly determine the activity and direction of the radioactive cloud spread on the ground or in the air can prevent unnecessary deaths and related financial losses. Although the design of the current generation of NPPs incorporates features that minimize the risk of large radioactive releases outside the reactor, it is still important to focus on the development of systems that can mitigate the consequences of such events. In situations when the level of radiation does not permit the personal to perform the required measurements, online unmanned radiation monitoring systems may come to the play. For such a purpose the RMS-00x radiation monitoring system could be used, which is a modular system covering the functionality of dose rate measurement, air sampling and radiation map creation without requiring the human personnel to be present at the measurement site. The main purpose of the RMS-00x radiation monitoring system is the rapid deployment of unmanned monitoring devices to reduce the radiation burden on workers and on public. The system can be applied in the vicinity of a nuclear power plant (NPP) or at any location, where source of ionizing radiation could be present. Before this system is used in real conditions, its components must be thoroughly calibrated, based on certified measurement equipment and state-of-art simulation tools. This paper deals with the description of the RMS-00X sensor modules and demonstrates their functionality in combination with UAV. In addition, demonstration of the use of the developed technology was carried out as part of the regular emergency planning and preparedness of EBO NPP on 26th October 2017

Unmanned Radiation Monitoring System

The absence of online radiation monitoring systems has been observed in the case of Fukushima nuclear accident. As the tsunami destroyed 23 of the 24 status monitoring points, almost no relevant radiation dose measurements data were available. A rapid deployment of a mobile radiological unit that can quickly determine the activity and direction of the radioactive cloud spread on the ground or in the air can prevent unnecessary deaths and related financial losses. Although the design of the current generation of NPPs incorporates features that minimize the risk of large radioactive releases outside the reactor, it is still important to focus on the development of systems that can mitigate the consequences of such events. In situations when the level of radiation does not permit the personal to perform the required measurements, online unmanned radiation monitoring systems may come to the play. For such a purpose the RMS-00x radiation monitoring system could be used, which is a modular system covering the functionality of dose rate measurement, air sampling and radiation map creation without requiring the human personnel to be present at the measurement site. The main purpose of the RMS-00x radiation monitoring system is the rapid deployment of unmanned monitoring devices to reduce the radiation burden on workers and on public. The system can be applied in the vicinity of a nuclear power plant (NPP) or at any location, where source of ionizing radiation could be present. Before this system is used in real conditions, its components must be thoroughly calibrated, based on certified measurement equipment and state-of-art simulation tools. This paper deals with the description of the RMS-00X sensor modules and demonstrates their functionality in combination with UAV. In addition, demonstration of the use of the developed technology was carried out as part of the regular emergency planning and preparedness of EBO NPP on 26th October 2017