Outsourcing Introduction in Production Enterprises

In the modern period of competition size and nature change, becoming international in nature, the sustainable development of Russia is of high priority. The most important factor in ensuring sustainable development of the country is the increase of economic entities efficiency and competitiveness through the use of innovative management tools.Aaldersom R., E. Andersonom, S. Wilson, M. Donnellan, E. Jordan, B. Trinkl, JB Heywood and a number of other foreign theorists and practitioners considered outsourcing problems as an innovative tool to improve the efficiency of entities operation. Despite the fact that outsourcing is a relatively new subject of research in the Russian management literature, comprehensive works by B. Anikin, S. Baranenko, S. Kalendzhyan, N. Lyasnikova, E.Platonovoy, I. Rudoy, V. Sinyaeva, etc. have been developed.The abundance of research denotes the importance and topicality of the problem. The article deals with the theoretical and methodological aspects of outsourcing, identifies opportunities of outsourcing use as a tool for the development of strategic competitiveness and sustainability of the national economic entities.The features of efficient interaction between the customer and the contractor in the process of business workflow process delivery for outsourcing are examined and the sequence of relations formation and development between outsourcing subjects is justified

Tricolor Technique for Visualization of Spatial Variations of Polydisperse Dust in Gas-Dust Flows

The aim of this work is to construct an algorithm for visualizing a polydisperse phase of solid particles (dust) in an inhomogeneous flow of a two-phase gas-dust mixture that would allow us to see, within one plot, the degree of polydispersity of the dust phase and the difference in the spatial distributions of individual fractions of dust particles in the computational domain. The developed technique allows us to reproduce concentrations from one to three fractions of dust particles in each cell in the computational domain. Each of the three fractions of dust particles is mapped to one of the main channels of the RGB palette. The intensity of the color shade is set to be proportional to the relative concentration of dust particles in this fraction. The final image for a polydisperse mixture is obtained by adding images in each of the three color channels. To visualize the degree of polydispersity, I propose depicting the spatial distribution of the entropy of the dust mixture. The definition of the entropy of a mixture is generalized to take into account the states of a mixture with zero number of particles in the mixture. They correspond to dust-free sections of the computational domain (voids). The proposed method for visualizing the polydispersity of a mixture of particles is demonstrated using the example of dynamic numerical modeling of the spatial features of dust structures formed in turbulent gas-dust flows and in flows with shock waves

WORKING OUT OF MAIN EXEMPLARY EDUCATIONAL PROGRAMS FOR BACHELORS, MASTERS AND SPECIALISTS IN THE FIELD OF CONSTRUCTION

Introduction. The system of higher education in Russia is in the state of permanent transformation. During the recent period the aim of transformations has been adapting professional educational programs to the demands of community of professionals. The result of these transformations is approval of updated federal state educational standards, which obtained abbreviation “FSES 3++”. The essence of the standards updating is in establishing rules of accounting professional standards at development of professional educational programs. Starting from 2019 the training of personnel for construction industry will be fulfilled in compliance with FSES 3++. The training content of graduates is determined by educational organizations in compliance with exemplary main educational programs (EMEP). The article describes the experience of Federal educational methodical association in the system of higher education in an enlarged group of specialties and areas of training 08.00.00 Engineering and construction technology for development of EMEP. Materials and methods. In order to ensure the uniformity of the requirements for education of graduates of different profiles and qualifications, it was decided to develop EMEP for each of the main directions (profiles) of educational programs. As part of the development of EMEP, a methodology for formulating professional competencies based on an analysis of the requirements of professional standards was proposed and applied. Formulation of indicators of achievements in competencies was carried out in the form of a description of labour actions. Results. To date several draft EMEPs have been worked out for different directions and levels of education. A proven methodology for development of EMEP is used to compile EMEP for other areas. Conclusions. The process of harmonizing the educational and professional standards will permit not only solving the problem of professional orientation of educational programs, but also in this regard the task of ensuring quality of graduates training required by employers. For this purpose, EMEP should be developed separately according to the directions of educational programs and establish mandatory professional competencies. Such an approach to the development of EMEP also ensures the achievement of unity of the educational system as one of the requirements of the Federal Law “On Education in the Russian Federation”

Effect of atmospheric-pressure plasma jet on normal and tumor cells in vitro

The purpose of this work is to investigate the effect of low-temperature plasma on tumor and normal cells. As a result of in vitro experiments, plasma-exposed tumor and normal cells demonstrate several effects such as cell detachment, apoptosis or necrosis according to cell type and exposure parameters (power, time of exposure, frequency). In experiments, the inhibition of tumor cell growth was observed up to 70% on the 5th day after exposure. The effect of gas discharge plasma on normal cells was the opposite, and by 5 days there was a stimulation of cell proliferation. The obtained data demonstrate the prospects of using this atmospheric-pressure plasma jet in biomedical research aimed at the treatment of cancer

Manganese catalysts to obtain olefins from C1-C4 alkanes

Oxidative transformations of C1-C4 alkanes into olefins on oxide manganese catalysts were under study. We also studied oxidative coupling of methane (OCM) into ethylene on deposited and applied on the silicon dioxide catalysts. We studied the influence of chemical composition of catalyst and promotors on the OCM. Adding a little amount of ethane and propane hydrocarbons to methane allows increasing the concentration of ethylene in gases and significantly increasing productivity in ethylene. The study also shows the impact of the amount of manganese and promotors applied on SiO2 on the yield of olefins during the conversion of C3-C4 alkanes

Stabilization of acromioclavicular joint using DogBone dynamic system (Arthrex): a literature review and long-term follow-up

Objectives The purpose of the study was to evaluate long-term follow-ups of stabilized acromioclavicular joint (ACJ) dislocations using button dynamic system applied via arthroscopic technique or mini-open. Material and methods The review included follow-ups of 40 patients (39 males, 1 female) who underwent 40 ACJ stabilization procedures with Arthrex DogBone button between 2014 and 2017 using arthroscopy (n = 28) or mini-open technique (n = 12). The mean age of the patients was 34 years (range, 15 to 59 years). Patient reported outcomes were evaluated with UCLA shoulder rating scale, American Shoulder and Elbow Surgeons (ASES) shoulder score and the Constant Shoulder Score (CSS). Coraco-Clavicular Distance (ССD) was measured on preand postoperative anteroposterior views. Postoperative AP view was used to measure Clavicular Tunnel Distance (CTD). Arthroscopy patients had available preoperative radiographs (n = 21), postoperative radiographs (n = 26) and patient reported outcomes (n = 18). Mini open group had available preoperative radiographs (n = 2), postoperative radiographs (n=8) and patient reported outcomes (n = 8). Results One hundred percent of Arthroscopy/Mini open (26/26) cases were rated as excellent and good on UCLA shoulder rating scale at a long-term follow-up. One hundred percent of Arthroscopy patients (18/18) were rated as excellent and good; 75 % (6/8) of Mini-open cases evaluated as excellent and 25 % (2/8) as good on ASES shoulder score. Sixty seven percent of Arthroscopy (12/18) patients were rated as excellent and 33 % (6/18) as good; 62 % (5/8) of Mini open cases evaluated as excellent and 38 % (3/8) as good. Neither fair nor poor results were observed in both groups. No statistically significant differences were detected in median scores between Arthroscopy and Miniopen groups (p > 0.05). Preoperative radiographs showed Tossy grade IV dislocation (n = 3) and Tossy grade III (n = 20). Distal clavicle fracture was diagnosed in 2 cases. Median preoperative CCD radiologically measured 15.5 mm in both groups (n = 23). Median postoperative CCD and CTD radiologically measured 6.12 mm and 28.9 mm in both groups (n = 35), correspondingly. Decrease in postoperative CCD was significantly different (p = 0.0003). No statistically significant differences in postoperative CCD were detected between Arthroscopy and Miniopen groups (p > 0.05). Statistically significant differences in preoperative CCD were observed in both groups (n = 15) using weight-bearing/no weight-bearing AP views (P = 0.0009). Conclusion Stabilization of dislocated ACJ with dynamic systems is the method of choice providing excellent and good outcomes rated by UCLA rating scale, ASES shoulder score and CSS at long-term follow-up. One-stage surgical treatment is an advantage of dynamic systems with no need of construct removal. Standard and weighted stress radiographs of the involved side indicate to ACJ injury in comparison with contralateral side. Further research is needed for a longer term follow-up with the bone reduction maintained with dynamic system

Influence of Posterior Tibial Slope on the Risk of Recurrence After Anterior Cruciate Ligament Reconstruction

Background. Anterior cruciate ligament (ACL) graft rupture has multifactorial causes, with traumatic factors being the most prevalent. Modern literature presents conflicting data regarding the influence of the posterior tibial slope on the risk of traumatic ACL graft rupture. Aim of the study to determine if there is a correlation between the posterior tibial slope and ACL graft injury in patients who have previously undergone ACL reconstruction. Methods. This was a single-center cohort retrospective study that included patients diagnosed with a complete ACL rupture and who had undergone ACL reconstruction using standard techniques without graft rupture at the last follow-up. Inclusion criteria for the first group included a diagnosis of traumatic ACL rupture followed by reconstruction, a graft composed of semitendinosus and gracilis tendons (St+Gr), femoral fixation with a cortical button, tibial fixation with a sleeve and screw, and the absence of graft rupture at the time of the study. This group included 30 consecutive patients (15 males and 15 females) with a mean age of 36.3 years (min 17, max 59). Inclusion criteria for the second group included an indirect traumatic mechanism of ACL graft rupture and subsequent revision ACL reconstruction. This group consisted of 33 patients (23 males and 10 females) with a mean age of 33.0 years (min 19, max 60). The lateral (LPTS) and medial (MPTS) posterior tibial slopes were measured on lateral knee radiographs. Results. The median time from surgery to the last follow-up in the first group was 65 months (IQR 60; 66), while in the second group, it was 48 months (IQR 9; 84). The median MPTS in the first group was 7.8 (IQR 5.3; 9.4), while in the second group, it was 8.5 (IQR 7.5; 11). The median LPTS in the first group was 9.9 (IQR 8.4; 12.1), whereas in the second group, it was 12.0 (IQR 9; 15.4). There was no statistically significant difference in MPTS and LPTS based on gender in both groups and the entire sample (p0.05). When comparing LPTS values between both groups, a statistically significant difference (p = 0.04) was found, with higher LPTS values in patients in the second group (with ACL graft injury). Conclusion. Increased posterior tibial slope, particularly LPTS, is identified as a potential predictor of ACL graft rupture. The study demonstrates the impact of LPTS on the risk of ACL graft rupture (p0.05) in cases of indirect traumatic injury

Intercomparison of Large-Eddy Simulations of Arctic Mixed-Phase Clouds: Importance of Ice Size Distribution Assumptions

Large-eddy simulations of mixed-phase Arctic clouds by 11 different models are analyzed with the goal of improving understanding and model representation of processes controlling the evolution of these clouds. In a case based on observations from the Indirect and Semi-Direct Aerosol Campaign (ISDAC), it is found that ice number concentration, Ni, exerts significant influence on the cloud structure. Increasing Ni leads to a substantial reduction in liquid water path (LWP), in agreement with earlier studies. In contrast to previous intercomparison studies, all models here use the same ice particle properties (i.e., mass-size, mass-fall speed, and mass-capacitance relationships) and a common radiation parameterization. The constrained setup exposes the importance of ice particle size distributions (PSDs) in influencing cloud evolution. A clear separation in LWP and IWP predicted by models with bin and bulk microphysical treatments is documented and attributed primarily to the assumed shape of ice PSD used in bulk schemes. Compared to the bin schemes that explicitly predict the PSD, schemes assuming exponential ice PSD underestimate ice growth by vapor deposition and overestimate mass-weighted fall speed leading to an underprediction of IWP by a factor of two in the considered case. Sensitivity tests indicate LWP and IWP are much closer to the bin model simulations when a modified shape factor which is similar to that predicted by bin model simulation is used in bulk scheme. These results demonstrate the importance of representation of ice PSD in determining the partitioning of liquid and ice and the longevity of mixed-phase clouds

Russian Arctic Vegetation Archive—A new database of plant community composition and environmental conditions

Motivation: The goal of the Russian Arctic Vegetation Archive (AVA-RU) is to unite and harmonize data of plot-based plant species and their abundance, vegetation structure and environmental variables from the Russian Arctic. This database can be used to assess the status of the Russian Arctic vegetation and as a baseline to document biodiversity changes in the future. The archive can be used for scientific studies as well as to inform nature protection and restoration efforts. Main types of variables contained: The archive contains 2873 open-access geobotanical plots. The data include the full species. Most plots include information on the horizontal (cover per species and morphological group) and vertical (average height per morphological group) structure of vegetation, site and soil descriptions and data quality estimations. In addition to the open-access data, the AVA-RU website contains 1912 restricted-access plots. Spatial location and grain: The plots of 1–100 m2 size were sampled in Arctic Russia and Scandinavia. Plots in Russia covered areas from the West to the East, including the European Russian Arctic (Kola Peninsula, Nenets Autonomous district), Western Siberia (Northern Urals, Yamal, Taza and Gydan peninsulas), Central Siberia (Taymyr peninsula, Bolshevik island), Eastern Siberia (Indigirka basin) and the Far East (Wrangel island). About 72% of the samples are georeferenced. Time period and grain: The data were collected once at each location between 1927 and 2022. Major taxa and level of measurement: Plots include observations of >1770 vascular plant and cryptogam species and subspecies. Software format: CSV files (1 file with species list and abundance, 1 file with environmental variables and vegetation structure) are stored at the AVA-RU website (https://avarus.space/), and are continuously updated with new datasets. The open-access data are available on Dryad and all the datasets have a backup on the server of the University of Zurich. The data processing R script is available on Dryad