Spitzer Limits On Dust Emission and Optical Gas Absorption Variability Around Nearby Stars with Edge-On Circumstellar Disk Signatures

We present Spitzer observations and McDonald Observatory Smith Telescope and Anglo-Australian Telescope high spectral resolution optical observations of 4 nearby stars with variable or anomalous optical absorption, likely caused by circumstellar material. The optical observations of CaII and NaI cover a 2.8 year baseline, and extend the long term monitoring of these systems by previous researchers. In addition, mini-surveys of the local interstellar medium (LISM) around our primary targets provide a reconstruction of the intervening LISM along the line of sight. We confirm that the anomalous absorption detected toward alpha Oph is not due to circumstellar material, but to a small filamentary cloud <14.3 pc from the Sun. The three other primary targets, beta Car, HD85905, and HR10 show both short and long term variability, and little of the observed absorption can be attributed to the LISM along the line of sight. The Spitzer observations did not detect infrared excesses. We are able to place upper limits on any possible fractional infrared luminosity, which range from L_IR/L_star < 2-5 10^-6, for our three disk stars. No stable gas absorption component centered at the radial velocity of the star is detected for any of our targets. Based on simple assumptions of the variable gas absorption component, we estimate limits on the circumstellar gas mass causing the variable absorption, which range from 0.4-20 10^-8 M_Earth. These multiwavelength observations place strong limits on any possible circumstellar dust, while confirming variable circumstellar gas absorption, and therefore are interesting targets to explore the origins and evolution of variable circumstellar gas. (abridged)Comment: 65 pages, 16 figures; Accepted for publication in Ap

Modeling Spitzer observations of VV Ser. I. The circumstellar disk of a UX Orionis star

We present mid-infrared Spitzer-IRS spectra of the well-known UX Orionis star VV Ser. We combine the Spitzer data with interferometric and spectroscopic data from the literature covering UV to submillimeter wavelengths. The full set of data are modeled by a two-dimensional axisymmetric Monte Carlo radiative transfer code. The model is used to test the prediction of (Dullemond et al. 2003) that disks around UX Orionis stars must have a self-shadowed shape, and that these disks are seen nearly edge-on, looking just over the edge of a puffed-up inner rim, formed roughly at the dust sublimation radius. We find that a single, relatively simple model is consistent with all the available observational constraints spanning 4 orders of magnitude in wavelength and spatial scales, providing strong support for this interpretation of UX Orionis stars. The grains in the upper layers of the puffed-up inner rim must be small (0.01-0.4 micron) to reproduce the colors (R_V ~ 3.6) of the extinction events, while the shape and strength of the mid-infrared silicate emission features indicate that grains in the outer disk (> 1-2 AU) are somewhat larger (0.3-3.0 micron). From the model fit, the location of the puffed-up inner rim is estimated to be at a dust temperature of 1500 K or at 0.7-0.8 AU for small grains. This is almost twice the rim radius estimated from near-infrared interferometry. A best fitting model for the inner rim in which large grains in the disk mid-plane reach to within 0.25 AU of the star, while small grains in the disk surface create a puffed-up inner rim at ~0.7-0.8 AU, is able to reproduce all the data, including the near-infrared visibilities. [Abstract abridged]Comment: 12 pages, accepted for publication in Ap

Protostellar holes: Spitzer Space Telescope observations of the protostellar binary IRAS16293-2422

Mid-infrared (23-35 micron) emission from the deeply embedded "Class 0" protostar IRAS16293-2422 is detected with the Spitzer Space Telescope infrared spectrograph. A detailed radiative transfer model reproducing the full spectral energy distribution (SED) from 23 micron to 1.3 mm requires a large inner cavity of radius 600 AU in the envelope to avoid quenching the emission from the central sources. This is consistent with a previous suggestion based on high angular resolution millimeter interferometric data. An alternative interpretation using a 2D model of the envelope with an outflow cavity can reproduce the SED but not the interferometer visibilities. The cavity size is comparable to the centrifugal radius of the envelope and therefore appears to be a natural consequence of the rotation of the protostellar core, which has also caused the fragmentation leading to the central protostellar binary. With a large cavity such as required by the data, the average temperature at a given radius does not increase above 60-80 K and although hot spots with higher temperatures may be present close to each protostar, these constitute a small fraction of the material in the inner envelope. The proposed cavity will also have consequences for the interpretation of molecular line data, especially of complex species probing high temperatures in the inner regions of the envelope.Comment: Accepted for publication in ApJ Letter

Modeling Spitzer Observations of VV Ser. I. The Circumstellar Disk of a UX Orionis Star

We present mid-infrared Spitzer IRS spectra of the UX Orionis star VV Ser, combined with interferometric and spectroscopic data from the literature covering UV to submillimeter wavelengths. The full set of data are modeled by an axisymmetric Monte Carlo radiative transfer code to test the prediction of Dullemond et al. that disks around UX Orionis stars are self-shadowed and seen nearly edge-on. Our model is consistent with all the available observational constraints, providing strong support for this interpretation. The mid-infrared SED is declining and exhibits weak silicate emission features, consistent with a self-shadowed geometry. MIPS imaging shows that the disk has a small grain dust mass as low as 0.8 × 10^(-7) M_⊙, which may be due to strong grain growth and settling. The grains in the upper layers of the puffed-up inner rim must be small (0.01-0.4 μm) to reproduce the colors (R_V ~ 3.6) of the optical light curve, while the silicate emission features indicate that grains in the outer disk (>1-2 AU) are somewhat larger (0.3-3.0 μm). If grains in the inner disk are small, the location of the puffed-up inner rim is estimated to be at 0.7-0.8 AU. This is almost twice the rim radius estimated from near-infrared interferometry. Since larger (more gray) grains are able to penetrate closer to the star for the same dust sublimation temperature, we suggest a model in which large grains in the disk midplane reach to within 0.25 AU of the star, while small grains in the disk surface create a puffed-up rim at ~0.7-0.8 AU

Ices in the edge-on disk CRBR 2422.8-3423: Spitzer spectroscopy and Monte Carlo radiative transfer modeling

We present 5.2-37.2 micron spectroscopy of the edge-on circumstellar disk CRBR 2422.8-3423 obtained using the InfraRed Spectrograph (IRS) of the Spitzer Space Telescope. The IRS spectrum is combined with ground-based 3-5 micron spectroscopy to obtain a complete inventory of solid state material present along the line of sight toward the source. We model the object with a 2D axisymmetric (effectively 3D) Monte Carlo radiative transfer code. It is found that the model disk, assuming a standard flaring structure, is too warm to contain the very large observed column density of pure CO ice, but is possibly responsible for up to 50% of the water, CO2 and minor ice species. In particular the 6.85 micron band, tentatively due to NH4+, exhibits a prominent red wing, indicating a significant contribution from warm ice in the disk. It is argued that the pure CO ice is located in the dense core Oph-F in front of the source seen in the submillimeter imaging, with the CO gas in the core highly depleted. The model is used to predict which circumstances are most favourable for direct observations of ices in edge-on circumstellar disks. Ice bands will in general be deepest for inclinations similar to the disk opening angle, i.e. ~70 degrees. Due to the high optical depths of typical disk mid-planes, ice absorption bands will often probe warmer ice located in the upper layers of nearly edge-on disks. The ratios between different ice bands are found to vary by up to an order of magnitude depending on disk inclination due to radiative transfer effects caused by the 2D structure of the disk. Ratios between ice bands of the same species can therefore be used to constrain the location of the ices in a circumstellar disk. [Abstract abridged]Comment: 49 pages, accepted for publication in Ap

Spitzer Mid-infrared Spectroscopy of Ices Toward Extincted Background Stars

A powerful way to observe directly the solid state inventory of dense molecular clouds is by infrared spectroscopy of background stars. We present Spitzer/IRS 5-20 micron spectra of ices toward stars behind the Serpens and Taurus molecular clouds, probing visual extinctions of 10-34 mag. These data provide the first complete inventory of solid-state material in dense clouds before star formation begins. The spectra show prominent 6.0 and 6.85 micron bands. In contrast to some young stellar objects (YSOs), most (~75%) of the 6.0 micron band is explained by the bending mode of pure water ice. In realistic mixtures this number increases to 85%, because the peak strength of the water bending mode is very sensitive to the molecular environment. The strength of the 6.85 micron band is comparable to what is observed toward YSOs. Thus, the production of the carrier of this band does not depend on the energetic input of a nearby source. The spectra show large abundances of carbon monoxide and carbon dioxide (20-40% with respect to water ice). Compared to YSOs, the band profile of the 15 micron carbon dioxide bending mode lacks the signatures of crystallization, confirming the cold, pristine nature of these lines of sight. After the dominant species are removed, there are residuals that suggest the presence of minor species such as formic acid and possibly ammonia. Clearly, models of star formation should begin with dust models already coated with a fairly complex mixture of ices.Comment: 4 pages, 5 figures; To appear in Astrophysical Journal Letter

C2D Spitzer-IRS spectra of disks around T Tauri stars: I. Silicate emission and grain growth

Infrared ~5--35 um spectra for 40 solar-mass T Tauri stars and 7 intermediate-mass Herbig Ae stars with circumstellar disks were obtained using the Spitzer Space Telescope as part of the c2d IRS survey. This work complements prior spectroscopic studies of silicate infrared emission from disks, which were focused on intermediate-mass stars, with observations of solar-mass stars limited primarily to the 10 um region. The observed 10 and 20 um silicate feature strengths/shapes are consistent with source-to-source variations in grain size. A large fraction of the features are weak and flat, consistent with um-sized grains indicating fast grain growth (from 0.1--1.0 um in radius). In addition, approximately half of the T Tauri star spectra show crystalline silicate features near 28 and 33 um indicating significant processing when compared to interstellar grains. A few sources show large 10-to-20 um ratios and require even larger grains emitting at 20 um than at 10 um. This size difference may arise from the difference in the depth into the disk probed by the two silicate emission bands in disks where dust settling has occurred. The 10 um feature strength vs. shape trend is not correlated with age or Halpha equivalent width, suggesting that some amount of turbulent mixing and regeneration of small grains is occurring. The strength vs. shape trend is related to spectral type, however, with M stars showing significantly flatter 10 um features (larger grain sizes) than A/B stars. The connection between spectral type and grain size is interpreted in terms of the variation in the silicate emission radius as a function of stellar luminosity, but could also be indicative of other spectral-type dependent factors (e.g, X-rays, UV radiation, stellar/disk winds, etc.).Comment: 17 pages, 13 figures, accepted for publication by ApJ, formatted with emulateapj using revtex4 v4.

8--13 um spectroscopy of YSOs: Evolution of the silicate feature

In order to investigate possible connections between dust processing and disk properties, 8--13 um spectra of 34 young stars, with a range of circumstellar environments and spectral types A to M, were obtained using the Long Wavelength Spectrometer at the W. M. Keck Observatory. The broad 9.7 um amorphous silicate feature which dominates this wavelength regime evolves from absorption in young, embedded sources, to emission in optically revealed stars, and to complete absence in older debris disk systems for both low- and intermediate-mass stars. The peak wavelength and FWHM are centered about 9.7 and ~2.3 um, corresponding to amorphous olivine, with a larger spread in FWHM for embedded sources and in peak wavelength for disks. In a few of our objects that have been previously identified as class I low-mass YSOs, the observed silicate feature is complex, with absorption near 9.5 um and emission peaking around 10 um. Although most of the emission spectra show broad classical features attributed to amorphous silicates, variations in the shape/strength may be linked to dust processing, including grain growth and/or silicate crystallization. We study quantitatively the evidence for evolutionary trends in the 8--13 um spectra through a variety of spectral shape diagnostics. Based on the lack of correlation between these diagnostics and broad-band infrared luminosity characteristics for silicate emission sources, we conclude that although spectral signatures of dust processing are present, they can not be connected clearly to disk evolutionary stage (for optically thick disks) or optical depth (for optically thin disks). The diagnostics of silicate absorption features (other than the central wavelength of the feature), however, are tightly correlated with optical depth.Comment: 27 pages, 13 figures, accepted for publication by ApJ, formatted with emulateapj using revtex4 v4.