216,028 research outputs found
Oscillatory instability of radiative shocks with multiple cooling processes
The stand-off shock formed in the accretion flow on to a stationary wall, such as the surface of a white dwarf, may be thermally unstable, depending on the cooling processes which dominate the post-shock flow. Some processes lead to instability, while others tend to stabilize the shock. We consider competition between the destabilizing influence of thermal bremsstrahlung cooling, and a stabilizing process which is a power law in density and temperature. Cyclotron cooling and processes which are of order 1, 3/2 and 2 in density are considered. The relative efficiency and power-law indices of the second mechanism are varied, and particular effects on the stability properties and frequencies of oscillation modes are examined
Stability analysis of two-temperature radiative shocks; formulation, eigenfunctions, luminosity response and boundary conditions
We present a general formulation for stability analyses of radiative shocks with multiple cooling processes, longitudinal and transverse perturbations, and unequal electron and ion temperatures. Using the accretion shocks of magnetic cataclysmic variables as an illustrative application, we investigate the shock instabilities by examining the eigenfunctions of the perturbed hydrodynamic variables. We also investigate the effects of varying the condition at the lower boundary of the post-shock flow from a zero-velocity fixed wall to several alternative types of boundaries involving the perturbed hydrodynamic variables, and the variations of the emission from the post-shock flow under different modes of oscillations. We found that the stability properties for flow with a stationary-wall lower boundary are not significantly affected by perturbing the lower boundary condition, and they are determined mainly by the energy-transport processes. Moreover, there is no obvious correlation between the amplitude or phase of the luminosity response and the stability properties of the system. Stability of the system can, however, be modified in the presence of transverse perturbation. The luminosity responses are also altered by transverse perturbation
Perturbative analysis of two-temperature radiative shocks with multiple cooling processes
The structure of the hot downstream region below a radiative accretion shock, such as that of an accreting compact object, may oscillate because of a global thermal instability. The oscillatory behaviour depends on the functional forms of the cooling processes, the energy exchanges of electrons and ions in the shock-heated matter, and the boundary conditions. We analyse the stability of a shock with unequal electron and ion temperatures, where the cooling consists of thermal bremsstrahlung radiation which promotes instability, plus a competing process which tends to stabilize the shock. The effect of transverse perturbations is considered also. As an illustration, we study the special case in which the stabilizing cooling process is of order 3/20 in density and 5/2 in temperature, which is an approximation for the effects of cyclotron cooling in magnetic cataclysmic variables. We vary the efficiency of the second cooling process, the strength of the electron–ion exchange and the ratio of electron and ion pressures at the shock, to examine particular effects on the stability properties and frequencies of oscillation modes
Micro milling performance assessment of diamond-like carbon coatings on a micro-end mill
This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2013 Institution of Mechanical Engineers.In micro milling, unpredictable tool life and premature tool failures are the major constraints for its industrial applications, and prolongation of the tool life so as to enhance the tooling performance presents great challenges. Appropriate coating techniques potentially offer a feasible and promising solution. In this study, diamond-like carbon films are deposited on a Ø500 µm diameter tungsten carbide (WC) micro-end mill by the plasma-enhanced chemical vapour deposition process. Coating characterisation has been undertaken and the diamond-like carbon coatings are found in good coverage on the tool except for a slight delaminating on the edge corners. Besides, the surface of the amorphous coatings is much smoother than that of WC. In addition, comprehensive cutting performance of the diamond-like carbon coated tool in dry slot milling of Al 6061-T6 has been compared with those of uncoated tools in both dry and wet conditions. It is observed that the use of diamond-like carbon coatings can reduce the cutting forces, lessen the tool wear, improves the surface roughness and minimise the micro-burr formation as compared to the corresponding performance of an uncoated tool in dry cutting. However, the performance improvement is still unreachable to those resulting from the cutting fluid influence.UK Technology Strategy Board and Kistler UK Ltd
X-ray Polarization Signatures of Compton Scattering in Magnetic Cataclysmic Variables
Compton scattering within the accretion column of magnetic cataclysmic
variables (mCVs) can induce a net polarization in the X-ray emission. We
investigate this process using Monte Carlo simulations and find that
significant polarization can arise as a result of the stratified flow structure
in the shock-ionized column. We find that the degree of linear polarization can
reach levels up to ~8% for systems with high accretion rates and low
white-dwarf masses, when viewed at large inclination angles with respect to the
accretion column axis. These levels are substantially higher than previously
predicted estimates using an accretion column model with uniform density and
temperature. We also find that for systems with a relatively low-mass white
dwarf accreting at a high accretion rate, the polarization properties may be
insensitive to the magnetic field, since most of the scattering occurs at the
base of the accretion column where the density structure is determined mainly
by bremsstrahlung cooling instead of cyclotron cooling.Comment: 7 pages, 8 figures, accepted by MNRA
Pipelined digital SAR azimuth correlator using hybrid FFT-transversal filter
A synthetic aperture radar system (SAR) having a range correlator is provided with a hybrid azimuth correlator which utilizes a block-pipe-lined fast Fourier transform (FFT). The correlator has a predetermined FFT transform size with delay elements for delaying SAR range correlated data so as to embed in the Fourier transform operation a corner-turning function as the range correlated SAR data is converted from the time domain to a frequency domain. The azimuth correlator is comprised of a transversal filter to receive the SAR data in the frequency domain, a generator for range migration compensation and azimuth reference functions, and an azimuth reference multiplier for correlation of the SAR data. Following the transversal filter is a block-pipelined inverse FFT used to restore azimuth correlated data in the frequency domain to the time domain for imaging
Characterization of the bending stiffness of large space structure joints
A technique for estimating the bending stiffness of large space structure joints is developed and demonstrated for an erectable joint concept. Experimental load-deflection data from a three-point bending test was used as input to solve a closed-form expression for the joint bending stiffness which was derived from linear beam theory. Potential error sources in both the experimental and analytical procedures are identified and discussed. The bending stiffness of a mechanically preloaded erectable joint is studied at three applied moments and seven joint orientations. Using this technique, the joint bending stiffness was bounded between 6 and 17 percent of the bending stiffness of the graphite/epoxy strut member
- …