31,366 research outputs found
Energy efficient engine preliminary design and integration studies
The characteristics and systems benefits of an energy efficient engine (E3) suitable for use on advanced subsonic transport aircraft were determined. Relative to a current CF6-50C engine, the following benefits were estimated: 14.4% reduction in installed cruise specific fuel consumption, and a reduction in direct operating cost of more than 5%. The advanced technology E3 system would also permit: compliance with FAR 36 (1977) noise limits, and compliance with 1981 EPA emission standards
Potts Models with (17) Invisible States on Thin Graphs
The order of a phase transition is usually determined by the nature of the
symmetry breaking at the phase transition point and the dimension of the model
under consideration. For instance, q-state Potts models in two dimensions
display a second order, continuous transition for q = 2,3,4 and first order for
higher q.
Tamura et al recently introduced Potts models with "invisible" states which
contribute to the entropy but not the internal energy and noted that adding
such invisible states could transmute continuous transitions into first order
transitions. This was observed both in a Bragg-Williams type mean-field
calculation and 2D Monte-Carlo simulations. It was suggested that the invisible
state mechanism for transmuting the order of a transition might play a role
where transition orders inconsistent with the usual scheme had been observed.
In this paper we note that an alternative mean-field approach employing
3-regular random ("thin") graphs also displays this change in the order of the
transition as the number of invisible states is varied, although the number of
states required to effect the transmutation, 17 invisible states when there are
2 visible states, is much higher than in the Bragg-Williams case. The
calculation proceeds by using the equivalence of the Potts model with 2 visible
and r invisible states to the Blume-Emery-Griffiths (BEG) model, so a
by-product is the solution of the BEG model on thin random graphs.Comment: (2) Minor typos corrected, references update
Active clearance control system for a turbomachine
An axial compressor is provided with a cooling air manifold surrounding a portion of the shroud, and means for bleeding air from the compressor to the manifold for selectively flowing it in a modulating manner axially along the outer side of the stator/shroud to cool and shrink it during steady state operating conditions so as to obtain minimum shroud/rotor clearance conditions. Provision is also made to selectively divert the flow of cooling air from the manifold during transient periods of operation so as to alter the thermal growth or shrink rate of the stator/shroud and result in adequate clearance with the compressor rotor
Preparation of monotectic alloys having a controlled microstructure by directional solidification under dopant-induced interface breakdown
Monotectic alloys having aligned spherical particles of rods of the minor component dispersed in a matrix of the major component are prepared by forming a melt containing predetermined amounts of the major and minor components of a chosen monotectic system, providing in the melt a dopant capable of breaking down the liquid solid interface for the chosen alloy, and directionally solidfying the melt at a selected temperature gradient and a selected rate of movement of the liquid-solid interface (growth rate). Shaping of the minor component into spheres or rods and the spacing between them are controlled by the amount of dopant and the temperature gradient and growth rate values. Specific alloy systems include Al Bi, Al Pb and Zn Bi, using a transition element such as iron
Synchronized voltage contrast display analysis system
An apparatus and method for comparing internal voltage potentials of first and second operating electronic components such as large scale integrated circuits (LSI's) in which voltage differentials are visually identified via an appropriate display means are described. More particularly, in a first embodiment of the invention a first and second scanning electron microscope (SEM) are configured to scan a first and second operating electronic component respectively. The scan pattern of the second SEM is synchronized to that of the first SEM so that both simultaneously scan corresponding portions of the two operating electronic components. Video signals from each SEM corresponding to secondary electron signals generated as a result of a primary electron beam intersecting each operating electronic component in accordance with a predetermined scan pattern are provided to a video mixer and color encoder
Spontaneous Raman scattering for simultaneous measurements of in-cylinder species
A technique for multi-species mole fraction measurement in internal combustion engines is described. The technique is based on the spontaneous Raman scattering. It can simultaneously provide the mole fractions of several species of N-2, O-2, H2O, CO2 and fuel. Using the system, simultaneous measurement of air/fuel ratio and burnt residual gas are carried out during the mixture process in a Controlled Auto Ignition (CAI) combustion engine. The accuracy and consistency of the measured results were confirmed by the measured air fuel ratio using an exhaust gas analyzer and independently calculated mole fraction values. Measurement of species mole fractions during combustion process has also been demonstrated. It shows that the SRS can provide valuable data on this process in a CAI combustion engine
- …