9,478 research outputs found
Two-phase flow dynamics in the gas diffusion layer of proton exchange membrane fuel cells: Volume of fluid modeling and comparison with experiment
This paper proposes a three-dimensional (3D) volume of fluid (VOF) study to investigate two-phase flow in the gas diffusion layer (GDL) of proton exchange membrane (PEM) fuel cells and liquid water distribution. A stochastic model was adopted to reconstruct the 3D microstructures of Toray carbon papers and incorporate the experimentally-determined varying porosity. The VOF predictions were compared with the water profiles obtained by the X-ray tomographic microscopy (XTM) and the Leverett correlation. It was found local water profiles are similar in the sample’s sub-regions under the pressure difference p = 1000 Pa between the two GDL surfaces, but may vary significantly under p = 6000 Pa. The water-air interfaces inside the GDL structure were presented to show water distribution and breakthrough
Recommended from our members
Investigating the in-/through-plane effective diffusivities of dry and partially-saturated gas diffusion layers
In this study, the effective oxygen diffusivity in the dry or partially-saturated gas diffusion layer (GDL) is numerically investigated by an oxygen diffusion model in GDLs reconstructed by a stochastic method. The predicted effective diffusivity in dry GDLs is compared with various diffusivity models from literatures. Reasonable agreements with other models were obtained. The effect of the PTFE loading in the dry Toray carbon paper is also investigated and compared with recent experimental data. It is found that the effective diffusivity becomes lower under higher PTFE loading due to the decreased pore volume, as expected. The relative effective oxygen diffusivity in partially-saturated GDLs is calculated using the two-phase volume of fluid (VOF) model and an oxygen diffusion model. The effects of different local water profiles and porosity distribution on the effective oxygen diffusivity in both the through-plane (TP) and in-plane (IP) directions are investigated and compared with a lattice Boltzmann model and experimental data. The present results are in good agreement with other studies. It is found that local water profile has significant impacts on the effective diffusivity in partially-saturated GDLs and the diffusivity in the TP direction is more sensitive to the water distribution than the IP direction
Recommended from our members
Two-phase flow and oxygen transport in the perforated gas diffusion layer of proton exchange membrane fuel cell
Liquid water transport in perforated gas diffusion layers (GDLs)is numerically investigated using a three-dimensional (3D)two-phase volume of fluid (VOF)model and a stochastic reconstruction model of GDL microstructures. Different perforation depths and diameters are investigated, in comparison with the GDL without perforation. It is found that perforation can considerably reduce the liquid water level inside a GDL. The perforation diameter (D = 100 μm)and the depth (H = 100 μm)show pronounced effect. In addition, two different perforation locations, i.e. the GDL center and the liquid water break-through point, are investigated. Results show that the latter perforation location works more efficiently. Moreover, the perforation perimeter wettability is studied, and it is found that a hydrophilic region around the perforation further reduces the water saturation. Finally, the oxygen transport in the partially-saturated GDL is studied using an oxygen diffusion model. Results indicate that perforation reduces the oxygen diffusion resistance in GDLs and improves the oxygen concentration at the GDL bottom up to 101% (D = 100 μm and H = 100 μm)
Induction of specific tolerance by intrathymic injection of recipient muscle cells transfected with donor class I major histocompatibility complex.
Induction of tolerance to allogeneic MHC antigens has been a goal in the field of transplantation because it would reduce or eliminate the need for generalized immunosuppression. Although encouraging results have been obtained in experimental models by exposing recipient thymus to donor cells before transplantation, donor cells are not typically available at that time, and the donor antigens responsible for the effect are poorly defined. In the present study, thymic tolerance was demonstrated without using donor cells. Recipient thymus was injected before transplantation with autologous myoblasts and myotubes that were genetically modified to express allogeneic donor-type MHC class I antigen. Donor-specific unresponsiveness was induced to a completely MHC-disparate liver transplant and to a subsequent donor-type cardiac allograft, but not a third-party allograft. In vitro, recipient CTL demonstrated a 10-fold reduction in killing of donor cells, but not of third-party cells. Our results demonstrate: (1) that recipient muscle cells can be genetically engineered to induce donor-specific unresponsiveness when given intrathymically, and (2) transfected recipient cells expressing only donor MHC class I antigen can induce tolerance to a fully allogeneic donor
CO hydrogenation reaction on sulfided molybdenum catalysts
Adsorption of reaction intermediates appearing during CO hydrogenation at the sulfur covered MoS2(1 0−1 0) surfaces, Mo-termination with 42% S coverage and S-termination with 50% S coverage, are investigated systematically using periodic density functional theory methods. Computed vibrational frequencies of all intermediates are compared with observed data from infrared (IR) spectroscopy allowing a detailed interpretation and assignment of the different features in the experimental spectra. The pathway for CO hydrogenation on both terminations has been studied in detail where the most likely reaction path involves C1 type surface species in the sequence CO→CHO→CH2O→CH2OH→CH2→CH3→CH4 in agreement with the experiment
Photoproduction of the charged top-pions at the LHeC
The top triangle moose model, which can be seen as the deconstructed
version of the topcolor-assisted technicolor () model, predicts the
existence of the charged top-pions in low energy spectrum. In
the context of this model, we consider photoproduction of via
the subprocesses and at the large hadron-electron collider (), in which high
energy photon beams are generated by using the Compton backscatting method. We
find that, as long as the charged top-pions are not too heavy, they can be
abundantly produced via collision.Comment: 16 pages, 5 figure
Lamb Wave Mode Selection for Increased Sensitivity ot Interfacial Weaknesses of Adhesive Bonds
Interface quality between layers in a layered structure is critical in fracture and fatigue analysis. A theoretical and quantitative solution to the problem from a NDE point of view would be desirable in both manufacturing and for in-service investigation of a variety of different structures. For example a great need exists to develop a reliable and efficient inspection program of adhesive bond delamination and interfacial weakness detection in aging aircraft noting that the bond degradation generally preceeds cracking in the aluminum skin, starting at the rivet holes
Modeling Heterogeneous Materials via Two-Point Correlation Functions: I. Basic Principles
Heterogeneous materials abound in nature and man-made situations. Examples
include porous media, biological materials, and composite materials. Diverse
and interesting properties exhibited by these materials result from their
complex microstructures, which also make it difficult to model the materials.
In this first part of a series of two papers, we collect the known necessary
conditions on the standard two-point correlation function S2(r) and formulate a
new conjecture. In particular, we argue that given a complete two-point
correlation function space, S2(r) of any statistically homogeneous material can
be expressed through a map on a selected set of bases of the function space. We
provide new examples of realizable two-point correlation functions and suggest
a set of analytical basis functions. Moreover, we devise an efficient and
isotropy- preserving construction algorithm, namely, the Lattice-Point
algorithm to generate realizations of materials from their two- point
correlation functions based on the Yeong-Torquato technique. Subsequent
analysis can be performed on the generated images to obtain desired macroscopic
properties. These developments are integrated here into a general scheme that
enables one to model and categorize heterogeneous materials via two-point
correlation functions.Comment: 37 pages, 26 figure
- …