Optimization of impact behavior of bio particulated coir-vinyl ester composites using simulated annealing with post analysis

The present investigation is focused on evaluation and optimization of impact behavior of bio particulated coir-vinyl ester composites. The bio particles such as groundnut shell, alumina and termite mound soil have been selected and their influences on the impact behavior of coir -vinyl ester composites are evaluated. The bio particulated composite fabrications are planned as per full factorial design with the different levels of fibre length, fibre content and particulate content. The impact strength of fabricated composites is evaluated. The nonlinear regression models are developed for the prediction of impact behaviors over the specified range of conditions. The fabrication parameters for the maximum value of impact behaviors are also determined using simulated annealing algorithm and conformance checking is carried out using post analysis. The optimum values of impact behaviors of 39.5, 45.9 and 52.1 kJ/m2 are obtained in coir-vinyl ester composites reinforced with groundnut shell, alumina and termite mound soil respectively.

Effect of soaking time and concentration of NaOH solution on mechanical properties of coir-polyester composites

The green husk coir fibres were treated with different levels of soaking time and concentration of alkali solution. As a result of alkali treatment, the surface modifications were done on the fibre surface and were studied using scanning electron micrographs. The coir–polyester composites were fabricated using hand lay up process and the mechanical properties (tensile, flexural and impact strength) were evaluated as per ASTM standards. The effect of soaking time and concentration of NaOH solution were studied based on evaluated values of mechanical properties to find out optimum fibre treatment parameters

Morphometrics and distribution of antennal sensillae of both sexes of Spodoptera frugiperda (Smith) (Lepidoptera: Noctuidae)

Fall Armyworm, Spodoptera frugiperda, is a devastating invasive pest persisting as a menace hampering the progress of Indian agriculture. The morphometrics and distribution of antennal sensilla of both sexes of S. frugiperda were investigated in the study. The antenna was filiform for both sexes and was composed of scape, pedicel and flagellum. Male antennas had more subsegments (65-71) in the flagellum than female (56-70) antennas. Male and female S. frugiperda antennae possessed eight types of sensilla: sensilla trichoidea, sensilla chaetica, sensilla coeloconica, sensilla styloconica, sensilla basiconica, sensilla auricillica, sensilla squamiformia and Bӧhm’s bristles. Sensilla trichoidea was the most abundant sensilla found in the antenna of both sexes and was more abundant in males than in females. It was also noticed that male antenna was longer than the female antenna. The results of the present study helps to assess alternative management strategies with an electrophysiological response of the pest towards sex pheromones and in combination with plant info chemicals for monitoring and management of S. frugiperda in agricultural ecosystems.

A Qualitative Analysis of Indoor Air Quality Pollutants inside a Private Car Cabin Using Response Surface Methodology

Indoor air quality (IAQ) plays a significant role in our daily life. IAQ is not only important in interior buildings but is also essential to the low volume space of automobile compartments. This study investigates the three critical IAQ pollutants of CO2, PM2.5, and PM10 in an air-conditioned private car cabin. Three qualitative input factors of human load, route, and air conditioning (ON and OFF) were considered to evaluate the effect of in-cabin car pollutants. Analysis of variance (ANOVA) was applied to determine the effect of the input parameters that affect IAQ in the car cabin. A mathematical modelling of response factors (pollutants) was determined using response surface methodology (RSM) in connection with the Taguchi orthogonal test design. It was found that indoor car cabin CO2, PM2.5, and PM10 concentrations were 3.32, 1.35, and 1.33 times higher than the on-road concentrations, respectively. The air-conditioning input factor has more effects for in-cabin pollutants compared with the other two input factors of human load and route. The R2 values obtained were greater than 95% for all the response factors. According to the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) standard limit, the air supply flow rate of 7.64 l/s per human (maximum 4 human load) was not enough to keep CO2 concentrations below 1000 ppm in the currently tested car cabin

OPTIMIZATION OF MECHANICAL BEHAVIORS OF BIO PARTICULATES FILLED COIR-POLYESTER COMPOSITES USING SIMULATED ANNEALING

ABSTRACT The mechanical behaviors of Coir-Polyester composites are greatly improved by the impregnation of bio particulates. The present investigation is focused on the evaluation and optimization of mechanical behaviors of CoirPolyester composites filled with bio particulates such as red mud and termite mound soil. The composite fabrications were planned as per Design of Experiments with fabrication parameters like fiber length (mm) and particulate content (%). The tensile, flexural and impact strength of fabricated composites were evaluated as per ASTM standards. The effect of fiber length and particulate content on the mechanical behaviors of Coir-Polyester composites was studied using ANOVA and Response Surface plots. The nonlinear regression models were developed for the prediction of mechanical behaviors over the specified range of conditions. The fabrication parameters for the optimum value of mechanical behaviors were determined using the single solution metaheuristic algorithm called Simulated Annealing

2-Amino-4-(4-chloro­phen­yl)-6-(pyrrolidin-1-yl)pyridine-3,5-dicarbonitrile

In the title compound, C17H14ClN5, two C atoms and their attached H atoms of the pyrrolidine ring are disordered over two sets of sites with an occupancy ratio of 0.638 (10):0.362 (10). The benzene and pyridine rings are inclined to one another by 60.57 (8)°. In the crystal, the amino group forms an N—H⋯N hydrogen bond with one of the cyano groups, linking the mol­ecules into chains along [010]