671 research outputs found
Activity and T-maze Performance of the White Rat as a Function of Drive and Apparatus
[From the Introduction] In the usual psychological experiment certain operations are performed upon the organisms being studied and a certain portion of the total responses are measured. The operations performed upon the organism may be roughly divided into two classes, those which are systematically varied and define the various experi mental groups, and those which are held constant across groups. Certain lawful relationships are then determined between those operations which are varied and the responses measured. Those operations which are held constant are considered to be factors which may also affect the responses being measured. It is usually felt that if these are held constant, then they will affect all groups equally and will not contaminate the results. The assumption here is that what is constant for the experimenter is constant for the various organisms. For example, in a T-maze problem, if the effect of several levels of hunger are being studied, the same maze is used with all groups, and it is assumed that the maze dimensions are constant for all groups. It may well be, however, that a given maze dimension may differentially affect animals at different hunger levels. If, at each hunger level, we use two mazes of differing lengths and find that the results obtained from one maze are parallel to the results obtained from the other, then we may assume that a condition of constancy exists. In some cases it will be obvious that such a condition of constancy does exist in the experiment, but in others this condition should be tested before the inferences are generalizable. It is to be noticed that the condition of constancy is defined by an a priori choice of the response of the organism to be measured. It may well be that if one does get results which appear to support a condition of constancy, it would not have been obtained had another response of the organism been measured. Therefore, one must use care in choosing which response of the organism he is going to measure. In the experiments to be reported on in this paper, close attention was paid to the effect of certain of the operations which in previous experiments have been considered under the class of constant operations. In the activity experiment, attention was focused on the effect of the apparatus used in measuring the activity, and in the T-Maze experiment, attention was focused upon a certain training procedure that has been used in many learning experiments in the past
Recommended from our members
The Role of Cellulosic Ethanol in Transportation
Petroleum provides essentially all of the energy used today in the transportation sector. To reduce this dependence on fossil energy, other fuels are beginning to be used, notably ethanol and biodiesel. Almost all fuel ethanol is produced by the conversion of corn grain to starch with subsequent fermentation to ethanol. In 2006, almost 5 billion gallons of fuel ethanol were produced, which used 17% of domestic corn production. The DOE has a goal to displace 30% of motor gasoline demand or 60 billion gallons per year by 2030. To achieve this goal, production of ethanol from lignocellulosic sources (e.g., agricultural residues, forest residues, and dedicated energy crops) is needed. This paper will describe the production of cellulosic ethanol as well as the issues and benefits associated with its production
Defect Tolerance to Intolerance in the Vacancy-Ordered Double Perovskite Semiconductors Cs2SnI6 and Cs2TeI6.
Vacancy-ordered double perovskites of the general formula A2BX6 are a family of perovskite derivatives composed of a face-centered lattice of nearly isolated [BX6] units with A-site cations occupying the cuboctahedral voids. Despite the presence of isolated octahedral units, the close-packed iodide lattice provides significant electronic dispersion, such that Cs2SnI6 has recently been explored for applications in photovoltaic devices. To elucidate the structure-property relationships of these materials, we have synthesized solid-solution Cs2Sn1-xTexI6. However, even though tellurium substitution increases electronic dispersion via closer I-I contact distances, the substitution experimentally yields insulating behavior from a significant decrease in carrier concentration and mobility. Density functional calculations of native defects in Cs2SnI6 reveal that iodine vacancies exhibit a low enthalpy of formation, and that the defect energy level is a shallow donor to the conduction band rendering the material tolerant to these defect states. The increased covalency of Te-I bonding renders the formation of iodine vacancy states unfavorable and is responsible for the reduction in conductivity upon Te substitution. Additionally, Cs2TeI6 is intolerant to the formation of these defects, because the defect level occurs deep within the band gap and thus localizes potential mobile charge carriers. In these vacancy-ordered double perovskites, the close-packed lattice of iodine provides significant electronic dispersion, while the interaction of the B- and X-site ions dictates the properties as they pertain to electronic structure and defect tolerance. This simplified perspective based on extensive experimental and theoretical analysis provides a platform from which to understand structure-property relationships in functional perovskite halides
Recommended from our members
Fixation of aqueous tritiated waste in polymer impregnated concrete and in polyacetylene
Tritiated aqueous waste can be used to hydrate hydraulic cement producing a concrete that contains a network of interconnected porosity. Such a product is subject to water intrusion and subsequent tritium loss by leaching and exchange. Techniques have been developed to impregnate this porosity with styrene monomer which is then polymerized in situ, resulting in a concrete that is essentially impermeable while its strength, durability, and resistance to chemical attack are significantly improved. Tritium bulk leach rates as low as 1.68 x 10 g/(cm-day) have been measured for polymer-impregnated concrete in water. An adsorbent additive can be incorporated to increase the specific tritiated waste loading of the concrete. Depending upon the formulations, these composites incorporate 5.8 to 8.3 liters HTO per cubic foot. Tritiated aqueous waste can also be fixed in polymeric form as polyacetylene through reaction with calcium carbide to form tritiated acetylene which is subsequently polymerized. Acetylene polymerization is accomplished by either Co gamma irradiation or thermal catalysis over cupric oxide. The tritiated polyacetylene produced can contain up to 50 atomic percent tritium and is essentially non-leachable, insoluble, thermally stable to 325C, and chemically inert. The bulk leach rate of tritiated polyacetylene was determined to be of the order of 1.8 x 10 g/(cm-day). Radiolysis by Co gamma irradiation results in a G value for hydrogen production of 0.15 molecules/100 eV. Tritiated polyacetylene can be incorporated as an aggregate in concrete, polymer concrete, or polymer impregnated concrete to form a monolithic solid. (auth
Recommended from our members
Solidification of oils and organic liquids
The suitability of selected solidification media for application in the disposal of low-level oil and other organic liquid wastes has been investigated. In the past, these low-level wastes (LLWs) have commonly been immobilized by sorption onto solid absorbents such as vermiculite or diatomaceous earth. Evolving regulations regarding the disposal of these materials encourage solidification. Solidification media which were studied include Portland type I cement; vermiculite plus Portland type I cement; Nuclear Technology Corporation's Nutek 380-cement process; emulsifier, Portland type I cement-sodium silicate; Delaware Custom Materiel's cement process; and the US Gypsum Company's Envirostone process. Waste forms have been evaluated as to their ability to reliably produce free standing monolithic solids which are homogeneous (macroscopically), contain < 1% free standing liquids by volume and pass a water immersion test. Solidified waste form specimens were also subjected to vibratory shock testing and flame testing. Simulated oil wastes can be solidified to acceptable solid specimens having volumetric waste loadings of less than 40 volume-%. However, simulated organic liquid wastes could not be solidified into acceptable waste forms above a volumetric loading factor of about 10 volume-% using the solidification agents studied
Recommended from our members
Cesium Substitution Disrupts Concerted Cation Dynamics in Formamidinium Hybrid Perovskites
Tolerance Factor and Cooperative Tilting Effects in Vacancy-Ordered Double Perovskite Halides
Lattice dynamics and structural instabilities are strongly implicated in dictating the electronic properties of perovskite halide semiconductors. We present a study of the vacancy-ordered double perovskite Rb2SnI6 and correlate dynamic and cooperative octahedral tilting with changes in electronic behavior compared to those of Cs2SnI6. Though both compounds exhibit native n-type semiconductivity, Rb2SnI6 exhibits carrier mobilities that are reduced by a factor of ∼50 relative to Cs2SnI6. From synchrotron powder X-ray diffraction, we find that Rb2SnI6 adopts the tetragonal vacancy-ordered double perovskite structure at room temperature and undergoes a phase transition to a lower-symmetry monoclinic structure upon cooling, characterized by cooperative octahedral tilting of the [SnI6] octahedra. X-ray and neutron pair distribution function analyses reveal that the local coordination environment of Rb2SnI6 is consistent with the monoclinic structure at all temperatures; we attribute this observation to dynamic octahedral rotations that become frozen in to yield the low-temperature monoclinic structure. In contrast, Cs2SnI6 adopts the cubic vacancy-ordered double perovskite structure at all temperatures. Density functional calculations show that static octahedral tilting in Rb2SnI6 results in marginally increased carrier effective masses, which alone are insufficient to account for the experimental electronic behavior. Rather, the larger number of low-frequency phonons introduced by the lower symmetry of the Rb2SnI6 structure yield stronger electron–phonon coupling interactions that produce larger electron effective masses and reduced carrier mobilities relative to Cs2SnI6. Further, we discuss the results for Rb2SnI6 in the context of other vacancy-ordered double perovskite semiconductors, in order to demonstrate that the electron–phonon coupling characteristics can be predicted using the geometric perovskite tolerance factor. This study represents an important step in designing perovskite halide semiconductors with desired charge transport properties for optoelectronic applications
Plasmons in coupled bilayer structures
We calculate the collective charge density excitation dispersion and spectral
weight in bilayer semiconductor structures {\it including effects of interlayer
tunneling}. The out-of-phase plasmon mode (the ``acoustic'' plasmon) develops a
long wavelength gap in the presence of tunneling with the gap being
proportional to the square root (linear power) of the tunneling amplitude in
the weak (strong) tunneling limit. The in-phase plasmon mode is qualitatively
unaffected by tunneling. The predicted plasmon gap should be a useful tool for
studying many-body effects.Comment: 10 pages, 6 figures. to appear in Phys. Rev. Let
The development and application of a new tool to assess the adequacy of the content and timing of antenatal care
Abstract
Background: Current measures of antenatal care use are limited to initiation of care and number of visits. This
study aimed to describe the development and application of a tool to assess the adequacy of the content and
timing of antenatal care.
Methods: The Content and Timing of care in Pregnancy (CTP) tool was developed based on clinical relevance for
ongoing antenatal care and recommendations in national and international guidelines. The tool reflects minimal
care recommended in every pregnancy, regardless of parity or risk status. CTP measures timing of initiation of care,
content of care (number of blood pressure readings, blood tests and ultrasound scans) and whether the
interventions were received at an appropriate time. Antenatal care trajectories for 333 pregnant women were then
described using a standard tool (the APNCU index), that measures the quantity of care only, and the new CTP tool.
Both tools categorise care into 4 categories, from ‘Inadequate’ (both tools) to ‘Adequate plus’ (APNCU) or
‘Appropriate’ (CTP). Participants recorded the timing and content of their antenatal care prospectively using diaries.
Analysis included an examination of similarities and differences in categorisation of care episodes between the
tools.
Results: According to the CTP tool, the care trajectory of 10,2% of the women was classified as inadequate, 8,4%
as intermediate, 36% as sufficient and 45,3% as appropriate. The assessment of quality of care differed significantly
between the two tools. Seventeen care trajectories classified as ‘Adequate’ or ‘Adequate plus’ by the APNCU were
deemed ‘Inadequate’ by the CTP. This suggests that, despite a high number of visits, these women did not receive
the minimal recommended content and timing of care.
Conclusions: The CTP tool provides a more detailed assessment of the adequacy of antenatal care than the
current standard index. However, guidelines for the content of antenatal care vary, and the tool does not at the
moment grade over-use of interventions as ‘Inappropriate’. Further work needs to be done to refine the content
items prior to larger scale testing of the impact of the new measure
Mobility of thorium ions in liquid xenon
We present a measurement of the Th ion mobility in LXe at 163.0 K and
0.9 bar. The result obtained, 0.2400.011 (stat) 0.011 (syst)
cm/(kV-s), is compared with a popular model of ion transport.Comment: 6.5 pages,
- …