680 research outputs found
Interpreting experimental bounds on D^0 - \bar{D^0} mixing in the presence of CP violation
We analyse the most recent experimental data regarding D^0 - \bar{D^0}
mixing, allowing for CP violation. We focus on the dispersive part of the
mixing amplitude, M^D_{12}, which is sensitive to new physics contributions. We
obtain a constraint on the mixing amplitude: |M^D_{12}| < 6.2\times 10^{-11}
MeV at 95% C.L. . This constraint is weaker by a factor of about three than the
one which is obtained when no CP violation is assumed.Comment: 9 pages, revtex4; One reference updated, one reference added,
footnote 3 correcte
Recommended from our members
A non-parametric approach to measuring the k- pi+ amplitudes in d+ --> k- k+ pi+ decay
Using a large sample of D{sup +} {yields} K{sup -}K{sup +}{pi}{sup +} decays collected by the FOCUS photoproduction experiment at Fermilab, we present the first non-parametric analysis of the K{sup -} {pi}{sup +} amplitudes in D{sup +} {yields} K{sup -}K{sup +}{pi}{sup +} decay. The technique is similar to the technique used for our non-parametric measurements of the D{sup +} {yields} {bar K}*{sup 0} e{sup +}{nu} form factors. Although these results are in rough agreement with those of E687, we observe a wider S-wave contribution for the {bar K}*{sub 0}{sup 0}(1430) contribution than the standard, PDG [1] Breit-Wigner parameterization. We have some weaker evidence for the existence of a new, D-wave component at low values of the K{sup -} {pi}{sup +} mass
Discrete element modeling and fibre optical measurements for fluidized bed spray granulation
Spout fluidized beds are frequently used for the production of granules or\ud
particles through granulation. The products find application in a large variety of\ud
applications, for example detergents, fertilizers, pharmaceuticals and food. Spout fluidized\ud
beds have a number of advantageous properties, such as a high mobility of the particles,\ud
which prevents undesired agglomeration and yields excellent heat transfer properties. The\ud
particle growth mechanism in a spout fluidized bed as function of particle-droplet\ud
interaction has a profound influence on the particle morphology and thus on the product\ud
quality. Nevertheless, little is known about the details of the granulation process. This is\ud
mainly due to the fact that the granulation process is not visually accessible. In this work\ud
we use fundamental, deterministic models to enable the detailed investigation of\ud
granulation behaviour in a spout fluidized bed. A discrete element model is used\ud
describing the dynamics of the continuous gas-phase and the discrete droplets and\ud
particles. For each element momentum balances are solved. The momentum transfer\ud
among each of the three phases is described in detail at the level of individual elements.\ud
The results from the discrete element model simulations are compared with local\ud
measurements of particle volume fractions as well as particle velocities by using a novel\ud
fibre optical probe in a fluidized bed of 400 mm I.D. Simulations and experiments were\ud
carried out for two different cases using Geldart B type aluminium oxide particles: a\ud
freely bubbling fluidized bed and a spout fluidized bed with the presence of droplets. It is\ud
demonstrated how the discrete element model can be used to obtain information about the\ud
interaction of the discrete phases, i.e. the growth zone in a spout fluidized bed. Eventually\ud
this kind of information can be used to obtain closure information required in more coarse\ud
grained model
Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spout fluidized bed
Spout fluidized beds are frequently used for the production of granules or particles through granulation. The products find application in a large variety of applications, for example detergents, fertilizers, pharmaceuticals and food. Spout fluidized beds have a number of advantageous properties, such as a high mobility of the particles, which prevents undesired agglomeration and yields excellent heat transfer properties. The particle growth mechanism in a spout fluidized bed as function of particle-droplet interaction has a profound influence on the particle morphology and thus on the product quality. Nevertheless, little is known about the details of the granulation process. This is mainly due to the fact that the granulation process is not visually accessible. In this work we use fundamental, deterministic models to enable the detailed investigation of granulation behaviour in a spout fluidized bed. A discrete element model is used describing the dynamics of the continuous gas-phase and the discrete droplets and particles. For each element momentum balances are solved. The momentum transfer among each of the three phases is described in detail at the level of individual elements. The results from the discrete element model simulations are compared with local measurements of particle volume fractions as well as particle velocities by using a novel fibre optical probe in a fluidized bed of 400 mm I.D. Simulations and experiments were carried out for three different cases using Geldart B type aluminium oxide particles: a freely bubbling fluidized bed; a spout fluidized bed without the presence of droplets and a spout fluidized bed with the presence of droplets. It is demonstrated how the discrete element model can be used to obtain information about the interaction of the discrete phases, i.e. the growth zone in a spout fluidized bed. Eventually this kind of information can be used to obtain closure information required in more coarse grained models
Recommended from our members
Neutral current pi0 production in MiniBooNE
This paper describes the analysis used to determine the neutral current {pi}{sup 0} production in MiniBooNE in bins of momentum. Additionally, a measurement of the relative coherent production of {pi}{sup 0}s is discussed. The coherent production rate is found to be (19.5 {+-}1.1 (stat) {+-}2.5 (sys))% of the total exclusive neutral current {pi}{sup 0} production rate
Search for T Violation in Charm Meson Decays
Using data from the FOCUS (E831) experiment, we have searched for T violation
in charm meson decays using the four-body decay channels , , and . The T violation asymmetry is obtained using triple-product
correlations and assuming the validity of the CPT theorem. We find the
asymmetry values to be
,
, and
.
Each measurement is consistent with no T violation. New measurements of the
CP asymmetries for some of these decay modes are also presented.Comment: 17 pages,6 figures,submitted to Phys.Lett.
Study of Cabibbo Suppressed Decays of the Ds Charmed-Strange Meson involving a KS
We study the decay of Ds meson into final states involving a Ks and report
the discovery of Cabibbo suppressed decay modes Ds -> Kspi-pi+pi+ (179 +/- 36
events) and Ds -> Kspi+ (113 +/-26 events). The branching ratios for the new
modes are Gamma(Ds -> Kspi-pi+pi+)/Gamma(Ds -> KsK-pi+pi+) = 0.18 +/- 0.04 +/-
0.05 and Gamma(Ds -> Kspi+)/Gamma(Ds -> KsK+) = 0.104 +/- 0.024 +/- 0.013.Comment: 11 pages, 6 figure
Measurements of Branching Ratios
Using data collected by the fixed target Fermilab experiment FOCUS, we
measure the branching ratios of the Cabibbo favored decays , , and relative to to be
, , and ,
respectively. We report the first observation of the Cabibbo suppressed decay
and we measure the branching ratio relative to
to be . We also set 90%
confidence level upper limits for and relative to to
be 0.12 and 0.05, respectively. We find an indication of the decays and and set
90% confidence level upper limits for the branching ratios with respect to
to be 0.12 and 1.72, respectively. Finally, we
determine the 90% C.L. upper limit for the resonant contribution relative to to be 0.10.Comment: 14 pages, 8 figure
Measurement of the Ratio of the Vector to Pseudoscalar Charm Semileptonic Decay Rate \Gamma(D+ > ANTI-K*0 mu+ nu)/\Gamma(D+ > ANTI-K0 mu+ nu)
Using a high statistics sample of photo-produced charm particles from the
FOCUS experiment at Fermilab, we report on the measurement of the ratio of
semileptonic rates \Gamma(D+ > ANTI-K pi mu+ nu)/\Gamma(D+ > ANTI-K0 mu+ nu)=
0.625 +/- 0.045 +/- 0.034. Allowing for the K pi S-wave interference measured
previously by FOCUS, we extract the vector to pseudoscalar ratio \Gamma(D+ >
ANTI-K*0 mu+ nu)/\Gamma(D+ > ANTI-K0 mu+ nu)= 0.594 +/- 0.043 +/- 0.033 and the
ratio \Gamma(D+ > ANTI-K0 mu+ nu)/\Gamma(D+ > K- pi+ pi+)= 1.019 +/- 0.076 +/-
0.065. Our results show a lower ratio for \Gamma(D > K* \ell nu})/\Gamma(D > K
\ell nu) than has been reported recently and indicate the current world average
branching fractions for the decays D+ >ANTI-K0(mu+, e+) nu are low. Using the
PDG world average for B(D+ > K- pi+ pi+) we extract B(D+ > ANIT-K0 mu+
nu)=(9.27 +/- 0.69 +/- 0.59 +/- 0.61)%.Comment: 15 pages, 1 figur
Cabibbo suppressed decays and the lifetime
The problem of the lifetime is considered in the framework of
{\em Heavy-Quark Expansion} and symmetry. The lifetime of
is expressed in terms of measurable inclusive quantities of the
other two charmed baryons belonging to the same multiplet in a
model-independent way. In such a treatment, inclusive decay rates of singly
Cabibbo suppressed decay modes have a prominent role. An analogous approach is
applied to the multiplet of charmed mesons yielding interesting predictions on
properties. The results obtained indicate that a more precise
measurement of inclusive decay quantities of some charmed hadrons (such as
) that are more amenable to experiment can contribute
significantly to our understanding of decay properties of other charmed hadrons
(such as ) where discrepancies or ambiguities exist.Comment: 9 pages, revtex4; certain improvements in text as suggested by the
referee, acknowledgement changed; version to appear in Phys. Rev.
- …