Numerical modelling of MPA-CVD reactors with the discontinuous Galerkin finite element method

In this article we develop a fully self consistent mathematical model describing the formation of a hydrogen plasma in a microwave power assisted chemical vapour deposition (MPA-CVD) reactor employed for the manufacture of synthetic diamond. The underlying multi-physics model includes constituent equations for the background gas mass average velocity, gas temperature, electromagnetic field energy and plasma density. The proposed mathematical model is numerically approximated based on exploiting the discontinuous Galerkin finite element method. We demonstrate the practical performance of this computational approach on a variety of CVD reactor geometries for a range of operating conditions

Inspection of the Lower Half of Wing Lap Joints with EMATs

Detection of fatigue cracks at the fastener holes in the lower portion of the C5A wing lap joint is complicated by lack of a direct line of access, and by the presence of fasteners and sealant material. Furthermore, any successful detection procedure must take into account the wide variation in the geometrical features of the joint. In this work, periodic permanent magnet EMATs (electromagnetic-acoustic transducers) have been employed to excite the n=o horizontally polarized shear mode of the skin at 200 kHz and 250 kHz. These modes are partially transmitted into the overlap region joined by the fastener. Spectral analysis of suitably time gated and apodized portions of the reflected waveform have allowed simulated cracks growing out of fastener holes to be detected, and preliminary sizing algorithms have been developed

Test Bed for Quantitative NDE

The ARPA/AFML Interdisciplinary Program for Quantitative Flaw Definition has demonstrated a number of new techniques for quantitatively sizing flaws, as are reported elsewhere in these proceedings. This paper describes the progress that has been made during the past year on a test bed program to assemble and demonstrate these techniques in a single integrated measurement system that will extend them from the idealized geometries that have been considered thus far to geometries that are a better approximation to those that are found in real parts. The basic system consists of a Data General Eclipse S/200 Minicomputer, a multiaxis microprocessor controller, a Biomation A/D converter, an immersion tank, and a contour following system with six degrees of freedom. The operation of the mechanical system with regard to its accuracy and repeatability will be described. In addition, a review of the conceptual design of the test bed system and experimental results for a number of different flaw geometries will be included. The Test Bed includes a piezoelectric array transducer and associated electronics. The array system will be used both for the imaging of flaws and the gathering of scattering data to use in other flaw characterization algorithms. The success of this portion of the program depends to a large extent on the availability of a suitable array transducer. Some difficulty has been met in obtaining such a transducer and the system design has been slightly modified as a result. The modified system will be described along with a review of the electronic system and an update on its current status. The extended data gathering capability of the system has been demonstrated with several diffusion bonded samples containing spherical and spheroidal voids. The noise associated with these signals is chiefly due. to the grain scattering and varies in amplitude over a wide range. The effects of this noise on the accuracy of the Inverse Born Approximation has been analyzed and the results will be summarized

EGRET Observations of the Diffuse Gamma-Ray Emission in Orion: Analysis Through Cycle 6

We present a study of the high-energy diffuse emission observed toward Orion by the Energetic Gamma-Ray Experiment Telescope (EGRET) on the Compton Gamma-Ray Observatory. The total exposure by EGRET in this region has increased by more than a factor of two since a previous study. A simple model for the diffuse emission adequately fits the data; no significant point sources are detected in the region studied ($l = 195^\circ$ to $220^\circ$ and $b = -25^\circ to -10^\circ$) in either the composite dataset or in two separate groups of EGRET viewing periods considered. The gamma-ray emissivity in Orion is found to be $(1.65 \pm 0.11) \times 10^{-26} {s sr}^{-1}$ for E > 100 MeV, and the differential emissivity is well-described as a combination of contributions from cosmic-ray electrons and protons with approximately the local density. The molecular mass calibrating ratio is $N(H_2)/W_{CO} = (1.35 \pm 0.15) \times 10^{20} cm^{-2} (K km/s)^{-1}$.Comment: 16 pages, including 5 figures. 3 Tables as three separate files. Latex document, needs AASTEX style files. Accepted for publication in Ap

Influence of Context on Item Parameters in Forced-Choice Personality Assessments

A fundamental assumption in computerized adaptive testing (CAT) is that item parameters are invariant with respect to context – items surrounding the administered item. This assumption, however, may not hold in forced-choice (FC) assessments, where explicit comparisons are made between items included in the same block. We empirically examined the influence of context on item parameters by comparing parameter estimates from two FC instruments. The first instrument was compiled of blocks of three items, whereas in the second, the context was manipulated by adding one item to each block, resulting in blocks of four. The item parameter estimates were highly similar. However, a small number of significant deviations were observed, confirming the importance of context when designing adaptive FC assessments. Two patterns of such deviations were identified, and methods to reduce their occurrences in a FC CAT setting were proposed. It was shown that with a small proportion of violations of the parameter invariance assumption, score estimation remained stable