Odd Magneto-Optical Linear Dichroism in a Magnetophotonic Crystal

The phenomena of magneto-optical polarization rotation and circular magnetic dichroism are well known in the Faraday configuration. We present another effect, an odd magneto-optical linear dichroism, arising in nanostructures with polarization-dependent mode Q-factors. It reveals itself as the magneto-optical modulation of light intensity for the two opposite magnetization directions in the Faraday configuration. The effect was demonstrated on a magnetophotonic crystal with a cavity mode, the polarization-dependent Q-factor of which is due to oblique incidence. For a polarization angle of 60{\deg} (or 120{\deg}) and an angle of incidence around 60{\deg}, the magneto-optical intensity modulation maximizes and reaches 6%

All-dielectric magnetic metasurface for advanced light control in dual polarizations combined with high-Q resonances

Nanostructured magnetic materials provide an efficient tool for light manipulation on sub-nanosecond and sub-micron scales, and allow for the observation of the novel effects which are fundamentally impossible in smooth films. For many cases of practical importance, it is vital to observe the magneto-optical intensity modulation in a dual-polarization regime. However, the nanostructures reported on up to date usually utilize a transverse Kerr effect and thus provide light modulation only for p-polarized light. We present a concept of a transparent magnetic metasurface to solve this problem, and demonstrate a novel mechanism for magneto-optical modulation. A 2D array of bismuth-substituted iron-garnet nanopillars on an ultrathin iron-garnet slab forms a metasurface supporting quasi-waveguide mode excitation. In contrast to plasmonic structures, the all-dielectric magnetic metasurface is shown to exhibit much higher transparency and superior quality-factor resonances, followed by a multifold increase in light intensity modulation. The existence of a wide variety of excited mode types allows for advanced light control: transmittance of both p- and s-polarized illumination becomes sensitive to the medium magnetization, something that is fundamentally impossible in smooth magnetic films. The proposed metasurface is very promising for sensing, magnetometry and light modulation applications

Sensing of surface and bulk refractive index using magnetophotonic crystal with hybrid magneto-optical response

We propose an all-dielectric magneto-photonic crystal with a hybrid magneto-optical response that allows for the simultaneous measurements of the surface and bulk refractive index of the analyzed substance. The approach is based on two different spectral features of the magneto-optical response corresponding to the resonances in p-and s-polarizations of the incident light. Angular spectra of p-polarized light have a step-like behavior near the total internal reflection angle which position is sensitive to the bulk refractive index. S-polarized light excites the TE-polarized optical Tamm surface mode localized in a submicron region near the photonic crystal surface and is sensitive to the refractive index of the near-surface analyte. We propose to measure a hybrid magneto-optical intensity modulation of p-polarized light obtained by switching the magnetic field between the transverse and polar configurations. The transversal component of the external magnetic field is responsible for the magneto-optical resonance near total internal reflection conditions, and the polar component reveals the resonance of the Tamm surface mode. Therefore, both surface-and bulk-associated features are present in the magneto-optical spectra of the p-polarized light

Magnetophotonics for sensing and magnetometry toward industrial applications

Magnetic nanostructures sustaining different types of optical modes have been used for magnetometry and label-free ultrasensitive refractive index probing, where the main challenge is the realization of compact devices that are able to transfer this technology from research laboratories to smart industry. This Perspective discusses the state-of-the-art and emerging trends in realizing innovative sensors containing new architectures and materials exploiting the unique ability to actively manipulate their optical properties using an externally applied magnetic field. In addition to the well-established use of propagating and localized plasmonic fields, in the so-called magnetoplasmonics, we identified a new potential of the all-dielectric platforms for sensing to overcome losses inherent to metallic components. In describing recent advances, emphasis is placed on several feasible industrial applications, trying to give our vision on the future of this promising field of research merging optics, magnetism, and nanotechnology

The 2022 magneto-optics roadmap

Magneto-optical (MO) effects, viz. magnetically induced changes in light intensity or polarization upon reflection from or transmission through a magnetic sample, were discovered over a century and a half ago. Initially they played a crucially relevant role in unveiling the fundamentals of electromagnetism and quantum mechanics. A more broad-based relevance and wide-spread use of MO methods, however, remained quite limited until the 1960s due to a lack of suitable, reliable and easy-to-operate light sources. The advent of Laser technology and the availability of other novel light sources led to an enormous expansion of MO measurement techniques and applications that continues to this day (see section 1). The here-assembled roadmap article is intended to provide a meaningful survey over many of the most relevant recent developments, advances, and emerging research directions in a rather condensed form, so that readers can easily access a significant overview about this very dynamic research field. While light source technology and other experimental developments were crucial in the establishment of today's magneto-optics, progress also relies on an ever-increasing theoretical understanding of MO effects from a quantum mechanical perspective (see section 2), as well as using electromagnetic theory and modelling approaches (see section 3) to enable quantitatively reliable predictions for ever more complex materials, metamaterials, and device geometries. The latest advances in established MO methodologies and especially the utilization of the MO Kerr effect (MOKE) are presented in sections 4 (MOKE spectroscopy), 5 (higher order MOKE effects), 6 (MOKE microscopy), 8 (high sensitivity MOKE), 9 (generalized MO ellipsometry), and 20 (Cotton–Mouton effect in two-dimensional materials). In addition, MO effects are now being investigated and utilized in spectral ranges, to which they originally seemed completely foreign, as those of synchrotron radiation x-rays (see section 14 on three-dimensional magnetic characterization and section 16 on light beams carrying orbital angular momentum) and, very recently, the terahertz (THz) regime (see section 18 on THz MOKE and section 19 on THz ellipsometry for electron paramagnetic resonance detection). Magneto-optics also demonstrates its strength in a unique way when combined with femtosecond laser pulses (see section 10 on ultrafast MOKE and section 15 on magneto-optics using x-ray free electron lasers), facilitating the very active field of time-resolved MO spectroscopy that enables investigations of phenomena like spin relaxation of non-equilibrium photoexcited carriers, transient modifications of ferromagnetic order, and photo-induced dynamic phase transitions, to name a few. Recent progress in nanoscience and nanotechnology, which is intimately linked to the achieved impressive ability to reliably fabricate materials and functional structures at the nanoscale, now enables the exploitation of strongly enhanced MO effects induced by light–matter interaction at the nanoscale (see section 12 on magnetoplasmonics and section 13 on MO metasurfaces). MO effects are also at the very heart of powerful magnetic characterization techniques like Brillouin light scattering and time-resolved pump-probe measurements for the study of spin waves (see section 7), their interactions with acoustic waves (see section 11), and ultra-sensitive magnetic field sensing applications based on nitrogen-vacancy centres in diamond (see section 17). Despite our best attempt to represent the field of magneto-optics accurately and do justice to all its novel developments and its diversity, the research area is so extensive and active that there remains great latitude in deciding what to include in an article of this sort, which in turn means that some areas might not be adequately represented here. However, we feel that the 20 sections that form this 2022 magneto-optics roadmap article, each written by experts in the field and addressing a specific subject on only two pages, provide an accurate snapshot of where this research field stands today. Correspondingly, it should act as a valuable reference point and guideline for emerging research directions in modern magneto-optics, as well as illustrate the directions this research field might take in the foreseeable future

Magneto-Optical Faraday Effect in Quasicrystalline and Aperiodic Microresonator Structures

We theoretically and numerically investigate magnetophotonic microresonators formed by a magnetic layer sandwiched between two reflective multilayers with different layer arrangements. Quasicrystals with the Fibonacci layer sequence and aperiodic structures with the Thue–Morse sequence are all compared to the conventional photonic crystal Bragg microresonators. The magneto-optical spectral properties of such magnetophotonic structures are completely different from each other and from a uniform magnetic film. In multilayered structures of various order types, microresonator modes are excited. The feature of multilayered structures with arrangements different from a periodic one is that they support the excitation of the multiple microresonator modes in a limited visible and near-infrared spectral range. The wavelengths of the two microresonator modes in a regular photonic crystal differ by more than one octave. This feature of the quasi-crystalline and aperiodic microresonators is important for applications in devices based on the Faraday effect

Plasmonic pulse shaping and velocity control via photoexcitation of electrons in a gold film

We study the possibility of surface plasmon polariton (SPP) pulse shape, delay and duration manipulation on sub-picosecond timescales via a high intensity pump SPP pulse photoexciting electrons in a gold film. We present a theoretical model describing this process and show that the pump induces the phase modulation of the probe pulse leading to its compression by about 20% and the variation of the delay between two SPP pulses up to 15 fs for the incident fluence of the pump of 1.5 mJ·cm-2