3,123 research outputs found
Knowledge synthesis and the Canadian Institutes of Health Research
The Canadian Institutes of Health Research (CIHR) is Canada's premier health-research funding agency. We fund nearly 14,000 researchers and trainees in four theme areas: biomedical, clinical, health services, and population and public-health research. Our mandate is 'to excel according to international standards of scientific excellence, in the creation of new knowledge and its translation into improved health for Canadians, more effective health services and products and a strengthened Canadian health care system'. Knowledge synthesis is a key element of the knowledge-translation objectives of CIHR, as outlined in our definition of knowledge-translation
Particle production and reheating in the inflationary universe
Thermal field theory is applied to particle production rates in inflationary
models, leading to new results for catalysed, or two-stage decay, where massive
fields act as decay channels for the production of light fields. A numerical
investigation of the Bolztmann equation in an expanding universe shows that the
particle distributions produced during small amplitude inflaton oscillations or
alongside slowly moving inflaton fields can thermalise.Comment: 16 pages, 12 figures, LaTeX, extra references in v
âEntrenched practices and other biasesâ: unpacking the historical, economic, professional, and social resistance to de-implementation
Background In their article on âEvidence-based de-implementation for contradicted, unproven, and aspiring healthcare practices,â Prasad and Ioannidis (IS 9:1, 2014) referred to extra-scientific âentrenched practices and other biasesâ that hinder evidence-based de-implementation. Discussion Using the case example of the de-implementation of radical mastectomy, we disaggregated âentrenched practices and other biasesâ and analyzed the historical, economic, professional, and social forces that presented resistance to de-implementation. We found that these extra-scientific factors operated to sustain a commitment to radical mastectomy, even after the evidence slated the procedure for de-implementation, because the factors holding radical mastectomy in place were beyond the control of individual clinicians. Summary We propose to expand de-implementation theory through the inclusion of extra-scientific factors. If the outcome to which we aim is appropriate and timely de-implementation, social scientific analysis will illuminate the context within which the healthcare practitioner practices and, in doing so, facilitate de-implementation by pointing to avenues that lead to systems change. The implications of our analysis lead us to contend that intervening in the broader context in which clinicians workâthe social, political, and economic realmsârather than focusing on healthcare professionalsâ behavior, may indeed be a fruitful approach to effect change
Assessing the Viability of Complex Electrical Impedance Tomography (EIT) with a Spatially Distributed Sensor Array for Imaging of River Bed Morphology: a Proof of Concept (Study)
This report was produced as part of a NERC funded âConnect Aâ project to establish a new collaborative partnership between the University of Worcester (UW) and Q-par Angus Ltd. The project aim was to assess the potential of using complex Electrical Impedance Tomography (EIT) to image river bed morphology. An assessment of the viability of sensors inserted vertically into the channel margins to provide real-time or near real-time monitoring of bed morphology is reported. Funding has enabled UW to carry out a literature review of the use of EIT and existing methods used for river bed surveys, and outline the requirements of potential end-users. Q-par Angus has led technical developments and assessed the viability of EIT for this purpose.
EIT is one of a suite of tomographic imaging techniques and has already been used as an imaging tool for medical analysis, industrial processing and geophysical site survey work. The method uses electrodes placed on the margins or boundary of the entity being imaged, and a current is applied to some and measured on the remaining ones. Tomographic reconstruction uses algorithms to estimate the distribution of conductivity within the object and produce an image of this distribution from impedance measurements.
The advantages of the use of EIT lie with the inherent simplicity, low cost and portability of the hardware, the high speed of data acquisition for real-time or near real-time monitoring, robust sensors, and the object being monitored is done so in a non-invasive manner. The need for sophisticated image reconstruction algorithms, and providing images with adequate spatial resolution are key challenges.
A literature review of the use of EIT suggests that to date, despite its many other applications, to the best of our knowledge only one study has utilised EIT for river survey work (Sambuelli et al 2002). The Sambuelli (2002) study supported the notion that EIT may provide an innovative way of describing river bed morphology in a cost effective way. However this study used an invasive sensor array, and therefore the potential for using EIT in a non-invasive way in a river environment is still to be tested.
A review of existing methods to monitor river bed morphology indicates that a plethora of techniques have been applied by a range of disciplines including fluvial geomorphology, ecology and engineering. However, none provide non-invasive, low costs assessments in real-time or near real-time. Therefore, EIT has the potential to meet the requirements of end users that no existing technique can accomplish.
Work led by Q-par Angus Ltd. has assessed the technical requirements of the proposed approach, including probe design and deployment, sensor array parameters, data acquisition, image reconstruction and test procedure. Consequently, the success of this collaboration, literature review, identification of the proposed approach and potential applications of this technique have encouraged the authors to seek further funding to test, develop and market this approach through the development of a new environmental sensor
Printing stable liquid tracks on a surface with finite receding contact angle.
We have used high-speed imaging to study the formation of liquid tracks on a surface with nonzero receding contact angle, by the sequential deposition of liquid drops. For small drop spacing we found good agreement with the track morphology predicted by an existing line stability model. In addition, we confirmed definitively the preferential drop-to-bead fluid flow and the predicted drop spreading variation in the scalloped line and paired bead formation regimes. However, we found that without accounting for drop impact inertia, the model underestimated the maximum drop spreading radii and, hence, the instantaneous track width. In addition, the printed track became stable at larger drop spacing, in contrast to the expected behavior. We believe that the destabilizing effect of a receding contact line may be minimized when track radii, as predicted by volume conservation and drop-bead coalescence dynamics, converge as the drop spacing increases. An increase in viscous dissipation and a reduction of the capillary-driven flow may be the additional stabilization mechanisms. The latter may also be responsible for achieving a stable and symmetrical track when printing with a shorter interval (higher print frequency) at a given drop spacing.This project was supported by the UK Engineering and
Physical Sciences Research Council and industrial partners in
the Programme Grant number EP/H018913/1 âInnovation in
Industrial Inkjet Technologyâ.This is the final published version. It first appeared at http://pubs.acs.org/doi/abs/10.1021/la502490p
Weathering the storm: developments in the acoustic sensing of wind and rain
An Acoustic Rain Gauge (ARG) analyses the underwater sound levels across a wide frequency range, classifies the observed spectrum according to likely source and then determines the local wind speed or rain rate as appropriate. Thispaper covers a trial on the Scotian Shelf off Canada, comparing the geophysical information derived from the acoustic signals with those obtained from other sources
Analysis of draft Australian rehabilitation service standards: comparison with international standards
- âŠ