2,087 research outputs found
Recommended from our members
Effects of Degree of Particle Melt and Crystallinity in SLS Nylon-12 Parts
Differential Scanning Calorimetry (DSC) traces for SLS Nylon-12 parts display two
distinct melt peaks, which have been related to the presence of both melted and crystallised
regions, and un-melted particle cores within the part. The relative proportions of each region are
defined by the term ‘Degree of Particle Melt’ (DPM), and have a large effect on the mechanical
properties of a part. This paper demonstrates that the % crystallinity of SLS Nylon-12 parts is
dependent on the DPM. Crucially, research has also shown that the trends for some tensile
properties (notably Tensile Strength and Young’s Modulus) change once full melting is
complete.Mechanical Engineerin
Recommended from our members
Investigating Dielectric Properties of Sintered Polymers for Rapid Manufacturing
Selective Laser Sintering (SLS) of polymers is the leading technology in the growing field of
Rapid Manufacturing. High Speed Sintering (HSS) is a process that offers the potential to reduce
costs and processing times and thus open significant new markets for Rapid Manufactured parts.
Much academic research has been performed with respect to mechanical properties of Rapid
Manufactured parts, however the area of electrical properties has received little attention to date.
Electrical properties are obviously important in applications that will involve embedding of
circuits with Rapid Manufactured 3D objects. However electrical properties are also important
for a wide variety of electrical products where Rapid Manufactured parts can be used as housings
etc.
This paper focuses on the dielectric properties of parts made by SLS and HSS and compares
properties with those for conventionally processed polymers. Dielectric strength results show
that SLS parts are comparable with injection moulded parts, while HSS parts are inferior to SLS
parts. Dielectric constant and dissipation factor results show that HSS parts are comparable with
injection moulded parts, whilst SLS parts have superior properties. The presence of porosity
(SLS and HSS) and the presence of carbon (HSS) are suggested as reasons behind the variation in
dielectric properties when compared with injection moulded parts.Mechanical Engineerin
Degree of Cajal-Retzius cell mislocalisation correlates with the severity of structural brain defects in mouse models of dystroglycanopathy
The secondary dystroglycanopathies are characterized by the hypoglycosylation of alpha dystroglycan, and are associated with mutations in at least 18 genes that act on the glycosylation of this cell surface receptor rather than the Dag1 gene itself. At the severe end of the disease spectrum, there are substantial structural brain defects, the most striking of which is often cobblestone lissencephaly. The aim of this study was to determine the gene‐specific aspects of the dystroglycanopathy brain phenotype through a detailed investigation of the structural brain defects present at birth in three mouse models of dystroglycanopathy—the FKRPKD, which has an 80% reduction in Fkrp transcript levels; the Pomgnt1null, which carries a deletion of exons 7–16 of the Pomgnt1 gene; and the Largemyd mouse, which carries a deletion of exons 5–7 of the Large gene. We show a rostrocaudal and mediolateral gradient in the severity of brain lesions in FKRPKD, and to a lesser extent Pomgnt1null mice. Furthermore, the mislocalization of Cajal–Retzius cells is correlated with the gradient of these lesions and the severity of the brain phenotype in these models. Overall these observations implicate gene‐specific differences in the pathogenesis of brain lesions in this group of disorders
Concentration dependent interdiffusion in InGaAs/GaAs as evidenced by high resolution x-ray diffraction and photoluminescence spectroscopy
Article copyright 2005 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The article appeared in Journal of Applied Physics 97, 013536 (2005) and may be found at
Recommended from our members
Fabrication of X-Graded H13 and Cu Powder Mix Using High Power Pulsed Nd:YAG Laser
The manufacturing of Functionally Graded Material (FGM) parts using Solid Free Form
manufacturing technologies has been carried out since early 1980. At present, most of the
powder manufacturing techniques are being focused on layering powder with different
powder blend compositions with Z gradients (graded in direction of layer build). Although,
there are a few researchers working on multi powder feeder and deposition system, the study
of laser fusion of the deposited powder (by a powder deposition system) is minimum or not
known to date. Consequently, the manufacturing of functionally graded structures is still
geometry limited. This work was focused on the manufacturing of X-graded (graded along the
powder bed plane) specimens with H13 tool steel and Cu mix. Five bimodal powder blends
were used with a multi-container feed hopper to spread powder layers for the selective laser
fusion of the powder. The powder was fused using a high power Nd:YAG pulsed laser using a
specific scanning strategy to reduce porosity. Specimens were produced with graded Cu
within the H13 matrix. The specimens were analysed for dimensional accuracy,
microstructure, porosity, cracks and micro hardness of the FGM.Mechanical Engineerin
Recommended from our members
Tailoring the Mechanical Properties of Selective Laser Sintered Parts
The ~£1 million IMCRC-funded integrated project ‘Personalised Sports Footwear: From
Elite to High Street’ is investigating the use of Rapid Manufacturing to produce personalised
sports shoes, with the aim of enhancing performance, reducing injury, and providing improved
functionality.
Research has identified that, for sprinting, performance benefits can be achieved by
tuning the bending stiffness of a shoe to the characteristics of an individual athlete. This paper
presents research to date on several novel methods of influencing the mechanical properties of
Selective Laser Sintered shoe soles, with a particular focus on stiffness.Mechanical Engineerin
Core-level photoemission spectroscopy of nitrogen bonding in GaNxAs1–x alloys
The nitrogen bonding configurations in GaNxAs1–x alloys grown by molecular beam epitaxy with 0.07=0.03, the nitrogen is found to exist in a single bonding configuration – the Ga–N bond; no interstitial nitrogen complexes are present. The amount of nitrogen in the alloys is estimated from the XPS using the N 1s photoelectron and Ga LMM Auger lines and is found to be in agreement with the composition determined by x-ray diffraction
Automated classification of three-dimensional reconstructions of coral reefs using convolutional neural networks
© The Author(s), 2020. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Hopkinson, B. M., King, A. C., Owen, D. P., Johnson-Roberson, M., Long, M. H., & Bhandarkar, S. M. Automated classification of three-dimensional reconstructions of coral reefs using convolutional neural networks. PLoS One, 15(3), (2020): e0230671, doi: 10.1371/journal.pone.0230671.Coral reefs are biologically diverse and structurally complex ecosystems, which have been severally affected by human actions. Consequently, there is a need for rapid ecological assessment of coral reefs, but current approaches require time consuming manual analysis, either during a dive survey or on images collected during a survey. Reef structural complexity is essential for ecological function but is challenging to measure and often relegated to simple metrics such as rugosity. Recent advances in computer vision and machine learning offer the potential to alleviate some of these limitations. We developed an approach to automatically classify 3D reconstructions of reef sections and assessed the accuracy of this approach. 3D reconstructions of reef sections were generated using commercial Structure-from-Motion software with images extracted from video surveys. To generate a 3D classified map, locations on the 3D reconstruction were mapped back into the original images to extract multiple views of the location. Several approaches were tested to merge information from multiple views of a point into a single classification, all of which used convolutional neural networks to classify or extract features from the images, but differ in the strategy employed for merging information. Approaches to merging information entailed voting, probability averaging, and a learned neural-network layer. All approaches performed similarly achieving overall classification accuracies of ~96% and >90% accuracy on most classes. With this high classification accuracy, these approaches are suitable for many ecological applications.This study was funded by grants from the Alfred P. Sloan Foundation (BMH, BR2014-049; https://sloan.org), and the National Science Foundation (MHL, OCE-1657727; https://www.nsf.gov). The funders had no role in the study design, data collection and analysis, decision to publish, or preparation of the manuscript
Vegetation height products between 60° S and 60° N from ICESat GLAS data.
We present new coarse resolution (0.5� ×0.5�)vegetation height and vegetation-cover fraction data sets between
60� S and 60� N for use in climate models and ecological
models. The data sets are derived from 2003–2009 measurements collected by the Geoscience Laser Altimeter System (GLAS) on the Ice, Cloud and land Elevation Satellite (ICESat), the only LiDAR instrument that provides close to global coverage. Initial vegetation height is calculated from GLAS data using a development of the model of Rosette et al. (2008) with further calibration on desert sites. Filters are developed to identify and eliminate spurious observations in the GLAS data, e.g. data that are affected by clouds, atmosphere
and terrain and as such result in erroneous estimates
of vegetation height or vegetation cover. Filtered GLAS vegetation height estimates are aggregated in histograms from 0 to 70m in 0.5m intervals for each 0.5�×0.5�. The GLAS vegetation height product is evaluated in four ways. Firstly, the Vegetation height data and data filters are evaluated using aircraft LiDAR measurements of the same for ten sites in the Americas, Europe, and Australia. Application of filters to the GLAS vegetation height estimates increases the correlation with aircraft data from r =0.33 to r =0.78, decreases the root-mean-square error by a factor 3 to about 6m (RMSE) or 4.5m (68% error distribution) and decreases the bias from 5.7m to −1.3 m. Secondly, the global aggregated GLAS vegetation height product is tested for sensitivity towards the choice of data quality filters; areas with frequent cloud cover and areas with steep terrain are the most sensitive to the choice of thresholds for the filters. The changes in height estimates by applying different filters are, for the main part, smaller than the overall uncertainty of 4.5–6m established from the site measurements. Thirdly, the GLAS global vegetation height product is compared with a global vegetation height product typically used in a climate model, a recent global tree height product, and a vegetation greenness product and is shown to produce realistic estimates of vegetation height. Finally, the GLAS bare soil cover fraction is compared globally with the MODIS bare soil fraction (r = 0.65) and with bare soil cover fraction estimates derived from AVHRR NDVI data (r =0.67); the GLAS treecover fraction is compared with the MODIS tree-cover fraction (r =0.79). The evaluation indicates that filters applied to the GLAS data are conservative and eliminate a large proportion of spurious data, while only in a minority of cases at the cost of removing reliable data as well. The new GLAS vegetation height product appears more realistic than previous data sets used in climate models and ecological models and hence should significantly improve simulations that involve the land surface
Introduction of standardised packaging and availability of illicit cigarettes: a difference-in-difference analysis of European Union survey data 2015-2018.
Standardised packaging of tobacco products is intended to reduce the appeal of smoking, but the tobacco industry claims this increases illicit trade. We examined the percentage of people reporting being offered illicit cigarettes before and after full implementation of standardised packaging in the UK, Ireland and France and compared this to other European Union countries. Reported ever illicit cigarette exposure fell from 19.8% to 18.1% between 2015 and 2018 in the three countries fully implementing the policy, and from 19.6% to 17.0% in control countries (p for difference=0.320). Standardised packaging does not appear to increase the availability of illicit cigarettes
- …