51 research outputs found
Using small-strain stiffness to predict the load-settlement behaviour of shallow foundations on sand
Foundation settlement prediction is a challenging task due to the difficulties associated with
the quantification of the soil stiffness and the abundance of available analysis methods. Of the
different soil stiffness moduli that may be measured, the initial small-strain stiffness is important
since it can be measured both in the field and the laboratory, and settlement prediction
methods using this parameter are becoming more common. The objective of this paper is to
present a settlement prediction method for shallow foundations that only uses small-strain
stiffness as input parameter.
The method was developed by conducting physical modelling in the geotechnical
centrifuge at the University of Pretoria to quantify the behaviour of shallow foundations on
sand. Bender and extender elements were used to obtain the small-strain stiffness profile below
the foundation before it was vertically loaded and the load-settlement curve determined. The
tests were conducted on different density sands corresponding to loose, medium-dense and
dense sand. A non-linear stepwise analysis approach was used in conjunction with a softening
function, with variables calibrated to obtain the best fit solution for the different sand densities.
Results indicate that the accuracy of the proposed method decreases as the sand density
increases, but that load-settlement behaviour can be predicted with reasonable accuracy.http://www.journals.co.za/ej/ejour_civileng.htmlhb201
Soil collapse from an effective stress perspective
The behaviour of collapsible soil is often quantified by conducting a Collapse Potential Test or
double oedometer test. However, these tests interpret the soil behaviour in terms of total stress,
while it is well known that the behaviour of soil is governed by its effective stress. This article
shows the results of a test conducted on undisturbed residual granite to study the collapse of
the soil in terms of effective stress. The test was conducted in a modified oedometer which
allowed the incremental addition of water to the sample during the test. The matric suction was
quantified as a function of the moisture content of the soil during the test. The results indicate
that the reduction in effective stress plays an important role during soil collapse. In addition
it was found that much of the collapse settlement may be due to creep which occurs after the
reduction in effective stress.http://www.journals.co.za/ej/ejour_civileng.htmlhb201
The application of continuous surface wave testing for settlement analysis with reference to a full-scale load test for a bridge at Pont Melin, Wales, UK
The presence of a significant thickness of soft silts beneath the site of a proposed new
road bridge caused concerns over the suitability of shallow foundations. Despite extensive
conventional ground investigations, it was not possible to obtain reliable stiffness data, and so a
full-scale, fully instrumented load test was undertaken to better determine ground stiffness. The
data obtained was used in conjunction with sophisticated numerical analysis to demonstrate that
the settlement of shallow foundations would be acceptable. Following completion of the bridge
construction, Continuous Surface Wave testing was undertaken and a range of simple non-linear
elastic settlement analyses conducted to model the behaviour of the load test. Through these
analyses this paper demonstrates the benefit of using continuous surface wave ground stiffness
testing in conjunction with simple analysis methods. It underlines the importance of obtaining
high-quality stiffness data to accurately predict settlement of shallow foundations.http://www.journals.co.za/ej/ejour_civileng.htmlam2017Civil Engineerin
Eddy Study to Understand Physical-Chemical-Biological Coupling and the Biological Carbon Pump as a Function of Eddy Type off West Africa, Cruise No. M160, 23.11.2019 - 20.12.2019, Mindelo (Cabo Verde) - Mindelo (Cabo Verde)
Cruise M160 is part of concerted MOSES/REEBUS Eddy Study featuring three major research expeditions (M156, M160, MSM104). It aims to develop both a qualitative and quantitative understanding of the role of physical-chemical-biological coupling in eddies for the biological pump. The study is part of the MOSES “Ocean Eddies” event chain, which follows three major hypotheses to be addressed by the MOSES/REEBUS field campaigns:
(1) Mesoscale and sub-mesoscale eddies play an important role in transferring energy along the energy cascade from the large-scale circulation to dissipation at the molecular level.
(2) Mesoscale and sub-mesoscale eddies are important drivers in determining onset, magnitude and characteristics of biological productivity in the ocean and contribute significantly to global primary production and particle export and transfer to the deep ocean.
(3) Mesoscale and sub-mesoscale eddies are important for shaping extreme biogeochemical environments (e.g., pH, oxygen) in the oceans, thus acting as a source/sink function for greenhouse gases.
In contrast to the other two legs, MOSES Eddy Study II during M160 did not include any benthic work but focused entirely on the pelagic dynamics within eddies. It accomplished a multi-disciplinary, multi-parameter and multi-platform study of two discrete cyclonic eddies in an unprecedented complexity. The pre-cruise search for discrete eddies suitable for detailed study during M160 had already started a few months prior to the cruise. Remote sensing data products (sea surface height, sea surface temperature, ocean color/chlorophyll a) were used in combination with eddy detection algorithms and numerical modelling to identify and track eddies in the entire eddy field off West Africa. In addition, 2 gliders and 1 waveglider had been set out from Mindelo/Cabo Verde for pre-cruise mapping of the potential working area north of the Cabo Verdean archipelago.
At the start of M160, a few suitable eddies – mostly of cyclonic type – had been identified, some of which were outside the safe operation range of the motorglider plane. As technical problems delayed the flight operations, the first eddy (center at 14.5°N/25°W) for detailed study was chosen to the southwest of the island of Fogo. It was decided to carry out a first hydrographic survey there followed by the deployment of a suite of instruments (gliders, waveglider, floats, drifter short-term mooring). Such instrumented, we left this first eddy and transited – via a strong anticyclonic feature southwest of the island of Santiago – to the region northeast of the island of Sal, i.e. in the working range of the glider plane. During the transit, a full suite of underway measurements as well as CTD/RO section along 22°W (16°-18.5°N) were carried in search for sub-surface expressions of anticyclonic eddy features.
In the northeast, we had identified the second strong cyclonic eddy (center at 18°N/22.5°W) which was chosen for detailed study starting with a complete hydrographic survey (ADCP, CTD/RO, other routine station work). After completion of the mesoscale work program, we identified a strong frontal region at the southwestern rim of the cyclonic eddy, which was chosen for the first sub-mesoscale study with aerial observation component. There, the first dye release experiment was carried out which consisted of the dye release itself followed by an intense multi-platforms study of the vertical and horizontal spreading of the initial dye streak. This work was
METEOR-Berichte, Cruise M160, Mindelo – Mindelo, 23.11.2019 4 – 20.12.2019
supported and partly guided by aerial observation of the research motorglider Stemme, which was still somewhat compromised by technical issues and meteorological conditions (high cloud cover, Saharan dust event). Nevertheless, this first dye release experiment was successful and showed rapid movement of the dynamic meandering front.
After completion of work on this second eddy and execution of a focused sampling program at the Cape Verde Ocean Observation, RV METEOR returned to the first eddy for continuation of the work started there in the beginning of the cruise. This was accompanied by a relocation of the airbase of Stemme from the international airport of Sal to the domestic airport of Fogo. The further execution of the eddy study at this first eddy, which again included a complete hydrographic survey followed by a mesoscale eddy study with dye release, was therefore possible with aerial observations providing important guidance for work on RV METEOR.
Overall, M160 accomplished an extremely intense and complex work program with 212 instrument deployments during station work, 137 h of observation with towed instruments and a wide range of underway measurements throughout the cruise. Up to about 30 individually tracked platforms (Seadrones, glider, wavegliders, drifters, floats) were in the water at the same time providing unprecedented and orchestrated observation capabilities in an eddy. All planned work components were achieved and all working groups acquired the expected numbers of instrument deployments and sampling opportunities
The seismic cone test
The seismic cone test is an in situ test used to measure body wave velocities in soils. Geotechnical parameters that may be derived from the test include void ratio, small strain stiffness and Poisson's ratio. In addition, results from the seismic cone
test allows judgement to be made on the static and dynamic liquefaction potential of soils. The test makes use of a cone containing several geophones, which is hydraulically pushed into the soil under investigation. Seismic waves are generated at the surface and the time required for the waves to propagate through the soil to the cone is measured. The information is used to determine the velocities of different wave types in the material.
This paper describes the seismic cone test. Field results are presented and parameters that may be derived from the results are
discussed
Ground stiffness measurement by the continuous surface wave test
The continuous surface wave (CSW) test is a seismic technique for determining ground stiffness by measuring the velocity of Rayleigh wave propagation along the ground surface. A sinusoidal force is generated by a shaker placed on the ground surface and the response is detected by an array of geophones also at the surface. Measurements are made for a range of shaker frequencies thereby allowing a profile of stiffness with depth to be established. The continuous surface wave test is performed relatively quickly and is less expensive than conventional stiffness measurement techniques; in addition it is non-intrusive and non-destructive thus making it attractive for civil engineering applications. This paper describes the continuous surface wave test, the execution of the test, analysis of the data as well as interpretation of the results. Calibration results as well as typical results from full scale field tests are presented
SAICE Journal
A discusssion of the Journal of the South African Institution of Civil Engineering and its current Open Access statusPresentation presented at the Open Access event, Merensky Library, University of Pretoria, 27 October 2011.http://www.library.up.ac.za/openup/oaday.ht
- …