73 research outputs found
Association of Mineralocorticoid Receptor Antagonists With the Mortality and Cardiovascular Effects in Dialysis Patients: A Meta-analysis
Whether Mineralocorticoid receptor antagonists (MRA) reduce mortality and cardiovascular effects of dialysis patients remains unclear. A meta-analysis was designed to investigate whether MRA reduce mortality and cardiovascular effects of dialysis patients, with a registration in INPLASY (INPLASY2020120143). The meta-analysis revealed that MRA significantly reduced all-cause mortality (ACM) and cardiovascular mortality (CVM). Patients receiving MRA presented improved left ventricular mass index (LVMI) and left ventricular ejection fraction (LVEF), decreased systolic blood pressure (SBP) and diastolic blood pressure (DBP). There was no significant difference in the serum potassium level between the MRA group and the placebo group. MRA vs. control exerts definite survival and cardiovascular benefits in dialysis patients, including reducing all-cause mortality and cardiovascular mortality, LVMI, and arterial blood pressure, and improving LVEF. In terms of safety, MRA did not increase serum potassium levels for dialysis patients with safety. Systematic Review Registration: (https://inplasy.com/inplasy-protocol-1239-2/), identifier (INPLASY2020120143)
Solvothermal Synthesis and Characterization of Chalcopyrite CuInSe2 Nanoparticles
The ternary I-III-VI2 semiconductor of CuInSe2 nanoparticles with controllable size was synthesized via a simple solvothermal method by the reaction of elemental selenium powder and CuCl as well as InCl3 directly in the presence of anhydrous ethylenediamine as solvent. X-ray diffraction patterns and scanning electron microscopy characterization confirmed that CuInSe2 nanoparticles with high purity were obtained at different temperatures by varying solvothermal time, and the optimal temperature for preparing CuInSe2 nanoparticles was found to be between 180 and 220 °C. Indium selenide was detected as the intermediate state at the initial stage during the formation of pure ternary compound, and the formation of copper-related binary phase was completely deterred in that the more stable complex [Cu(C2H8N2)2]+ was produced by the strong N-chelation of ethylenediamine with Cu+. These CuInSe2 nanoparticles possess a band gap of 1.05 eV calculated from UV–vis spectrum, and maybe can be applicable to the solar cell devices
Synthesis, Characterization and Photocatalytic Performance of SnS Nanofibers and SnSe Nanofibers Derived from the Electrospinning-made SnO2 Nanofibers
Influência do resfriamento dinâmico na medição da tensão limite de escoamento
Non-Newtonian fluids may present several complex characteristics, such as viscoelasticity, plasticity and thixotropy. Understanding the behaviour of these materials is essential to facilitate its applicability, since many of them are present in daily life, such as gels, chocolate, and mayonnaise. The material studied on the present work was an waxy crude oil. The oil, present in reservoirs located in deep water, when subjected to low temperatures during production shutdowns, precipitates its paraffin, creating a structure which may
be very resistant to flow. Thus, the formed material may represent a great difficulty to production restart. The design of pumps and compressors used in these systems depend on a rheological property called yield stress and therefore, it is essential to obtain reliable values of this rheological parameter. However, the complex behaviour, and the dependence of the crude oil characteristics on the shearing and temperature history make this a challenging task. Besides these, other factors may influence the measurement of yield
stress, as the effect of wall slip and if the cooling is static or dynamic. This work shows the variation of yield stress for tests with dynamic cooling. The imposition of a stress during cooling caused the reduction in yield stress 0. Increasing the imposed stress, 0 decreased until it reached a minimum. Next, it was noticed an increase in yield stress with increasing imposed stress. The experiments carried out in this work were made in a commercial stress control rheometer. The effect of wall slip was tested by comparing smooth and rough geometries and it was verified signs of its presence, with the reduction of yield stress for smooth geometries. The equation of Weissenberg-Rabinowitsch, used for correction of the inhomogeneity of the shear stress along the radius geometry, seemed to be not necessary for the demonstrated results.Fluidos não newtonianos podem apresentar diversas características complexas, como a viscoelasticidade, plasticidade e tixotropia. Entender o comportamento de materiais tão complexos é fundamental para facilitar sua aplicabilidade, já que muitos estão presentes no cotidiano das pessoas, como géis, chocolate e maionese. O material estudado no presente trabalho foi um petróleo parafínico. O petróleo, presente em bacias localizadas em águas profundas, quando submetido a baixas temperaturas durante paradas de produção, precipita suas parafinas dando origem a uma estrutura que pode ser muito resistente ao
escoamento. Dessa forma, o material formado pode representar uma grande dificuldade para o reinício da produção. O dimensionamento das bombas e compressores utilizados para retomada da produção depende de uma propriedade reológica denominada tensão limite de escoamento e, por isso, é fundamental obter valores confiáveis desse parâmetro reológico. No entanto, o comportamento complexo, e a dependência das características do petróleo com o histórico de cisalhamento e temperatura tornam a tarefa desafiadora.
Outros fatores podem influenciar na medição da tensão limite de escoamento, como o efeito do escorregamento na parede do sensor da geometria e se o resfriamento é estático ou dinâmico. Este trabalho mostra a variação da tensão limite de escoamento para ensaios com resfriamento dinâmico. A imposição de tensão durante o resfriamento causou a redução da tensão limite de escoamento 0. Elevando-se a tensão imposta, 0 reduziu até atingir um valor mínimo. Em seguida, percebeu-se um aumento da tensão limite de escoamento com o aumento da tensão imposta. Os experimentos realizados neste trabalho foram feitos em um reômetro comercial do tipo tensão controlada (“stress controlled”). O efeito de
escorregamento da amostra foi testado comparando geometrias com superfícies lisas e ranhuradas e foi possível verificar sinais de sua presença, com a redução da tensão limite de escoamento para geometrias lisas. A equação de Weissenberg-Rabinowitsch, utilizada para correção da não homogeneidade da tensão de cisalhamento ao longo do raio da geometria, mostrou-se não necessária para os resultados demonstrados
Syntheses and characterizations of two metal-organic polymers derived from pyridyl substituted terpyridine and 4,5-imidazole dicarboxylate
Synthesis, characterization and fluorescent properties of lanthanide complexes with two aryl amide ligands
New identification and significance of Early Cretaceous mafic rocks in the interior South China Block
Medical Supplier Selection with a Group Decision-Making Method Based on Incomplete Probabilistic Linguistic Preference Relations
- …