LiDAR in extreme environment: surveying in Antarctica

This study was performed under the patronage of the Italian National Research Programme in Antarctica (PNRA) with the aim to realize a high resolution Digital Elevation Model (DEM) of the moraine named "Boulder Clay" which insists approximately 7 km far from the Italian Research Base "Mario Zucchelli Station" in the Terra Nova Bay area. The DEM will be included in the project for the construction of two runways to be used as support facilities for the scientific research campaigns which take place on regular basis each year. Although the research efforts to realize a detailed cartography of the area is on-going, for the specific aim and urgency of this project it was decided to perform a laser scanning survey in this extreme environment in order to obtain contour lines describing the terrain elevation each 50 cm and volume analysis. The final result will be super imposed on a photogrammetric DEM with contour lines each 2.5 m and satellite images. This paper focus both on the final scientific data and on all the challenges have to be faced in such extreme and particular environment during the laser scanning survey

Essential oils as post-harvest crop protectants against the fruit fly drosophila suzukii: Bioactivity and organoleptic profile

The essential oils extracted from mandarin (Citrus reticulata Blanco) fruits, and from tea tree (Maleleuca alternifolia (Maiden and Betche) Cheel) leaves have been chemically analyzed and tested for their bioactivity against D. suzukii. Besides, to estimate consumers’ acceptability of the essential oil (EO) treatments, we evaluated their impact on the organoleptic characteristics of the EO-treated fruits. The main chemical constituents of the two EOs were 1,8-cineole and 4-terpineol for M. alternifolia (22.4% and 17.6% of the total components, respectively), and limonene (83.6% of the total components) for C. reticulata. The behavioral tests indicate that the two EOs are able to deter D. suzukii oviposition and that D. suzukii shows positive chemotaxis to low concentrations of the EOs and negative chemotaxis when the EO concentration increases. While no negative effects on the organoleptic profiles were detected for fruits treated with C. reticulata EO, the olfactory profile of fruits treated with M. alternifolia EO was so negative that they were defined as “not suitable for consumption” by panellists. Overall, our findings indicate that the use of EOs for the post-harvest protection of small fruits is feasible, provided that the essential oils are selected not only for their bioactivity against the insect pest but also for their affinity with the consumers’ sensorial system

SINEUP non-coding RNA activity depends on specific N6-methyladenosine nucleotides

SINEUPs are natural and synthetic antisense long non-coding RNAs (lncRNAs) selectively enhancing target mRNAs translation by increasing their association with polysomes. This activity requires two RNA domains: an embedded inverted SINEB2 element acting as effector domain, and an antisense region, the binding domain, conferring target selectivity. SINEUP technology presents several advantages to treat genetic (haploinsufficiencies) and complex diseases restoring the physiological activity of diseased genes and of compensatory pathways. To streamline these applications to the clinic, a better understanding of the mechanism of action is needed. Here we show that natural mouse SINEUP AS Uchl1 and synthetic human miniSINEUP-DJ-1 are N6-methyladenosine (m6A) modified by METTL3 enzyme. Then, we map m6A-modified sites along SINEUP sequence with Nanopore direct RNA sequencing and a reverse transcription assay. We report that m6A removal from SINEUP RNA causes the depletion of endogenous target mRNA from actively translating polysomes, without altering SINEUP enrichment in ribosomal subunit-associated fractions. These results prove that SINEUP activity requires an m6A-dependent step to enhance translation of target mRNAs, providing a new mechanism for m6A translation regulation and strengthening our knowledge of SINEUP-specific mode of action. Altogether these new findings pave the way to a more effective therapeutic application of this well-defined class of lncRNAs

Near term perspectives for fusion research and new contributions by the Ignitor program

The main advances made within the Ignitor program, that is aimed at investigating the physics of fusion burning plasmas near ignition, are described. In particular, the operation of the machine in the H and I regimes at the 10 MA plasma current levels has been considered and analyzed. The unique properties of the plasmas that can be generated by operating the machine with reduced parameters (lower magnetic fields and plasma currents) relative to those needed to achieve ignition are identified. A key feature of this operation is the relatively fast duty cycle that can be maintained. The Ideal Ignition Conditions, under which the density barrier due to bremsstrahlung emission in high density plasmas is removed, can be attained in this case. The plasma heating cycles are identified for which the contribution of ICRH is used both to enter the H-regime and to optimize the time needed for ignition. The on going effort to set up a test ICRH facility is described. The initial results (2 km/sec) of the high speed pellet injection system developed for Ignitor and operated at Oak Ridge are reported. The combined structural analysis and integration of the entire machine core (Load Assembly) is discussed. The adopted control system for both the machine and the plasma column has been designed and is described. The design solutions of the vertical field coils made of MgB2 and operating at 10 K have been identified and the relevant R&D program is underway. The analysis of the Caorso site and of its facility for the operation of the Ignitor with approved safety standards is completed. The relevant results are being made available for the operation of Ignitor at the Triniti site within the framework of the Italy-Russia agreement on the joint construction and operation of the Ignitor facility. A development effort concerning the advanced diagnostic systems that is being carried out for fusion burning plasma regimes is described. An initial analysis of the characteristics of a neutron source based on a system of Ignitor-like machines is reported

LiDAR in extreme environment: surveying in Antarctica

This study was performed under the patronage of the Italian National Research Programme in Antarctica (PNRA) with the aim to realize a high resolution Digital Elevation Model (DEM) of the moraine named "Boulder Clay" which insists approximately 7 km far from the Italian Research Base "Mario Zucchelli Station" in the Terra Nova Bay area. The DEM will be included in the project for the construction of two runways to be used as support facilities for the scientific research campaigns which take place on regular basis each year. Although the research efforts to realize a detailed cartography of the area is on-going, for the specific aim and urgency of this project it was decided to perform a laser scanning survey in this extreme environment in order to obtain contour lines describing the terrain elevation each 50 cm and volume analysis. The final result will be super imposed on a photogrammetric DEM with contour lines each 2.5 m and satellite images. This paper focus both on the final scientific data and on all the challenges have to be faced in such extreme and particular environment during the laser scanning survey

PROJECT PHOTOFLY: NEW 3D MODELING ONLINE WEB SERVICE (CASE STUDIES AND ASSESSMENTS)

During summer 2010, Autodesk has released a still ongoing project called Project Photofly, freely downloadable from AutodeskLab web site until August 1 2011. Project Photofly based on computer-vision and photogrammetric principles, exploiting the power of cloud computing, is a web service able to convert collections of photographs into 3D models. Aim of our research was to evaluate the Project Photofly, through different case studies, for 3D modeling of cultural heritage monuments and objects, mostly to identify for which goals and objects it is suitable. The automatic approach will be mainly analyzed

Single-beam optical bottle for cold atoms using a conical lens

We report a new method to generate an optical dipole potential with a null intensity region surrounded in all directions by light walls. This is achieved with a simple scheme based on a conical lens. Applications to optical trapping of neutral atoms are discussed

Paleomagnetic evidence of block rotations in the Matese Mountains, Southern Apennines, Italy.

From Morris, A. & Tarling D.H. (eds), 1996, Paleomagnetism and Tectonics of the Mediterranean region, Geological Society Special Publicatio

GIFT-2D: simulazione della formatura dei metalli su stazione di lavoro

SIGLEITItal