Antenna pattern of DUAL detectors of gravitational waves and its exploitation in a network of advanced interferometers

We investigate the directional sensitivity to plane gravitational waves (GWs) of DUAL detectors of cylindrical shape. Calculations make use of the finite element method to simulate the responses to the GW Riemann tensor of a single-mass DUAL (SMD) and of a tapered cylinder (TC) in their wide sensitivity bandwidth. We show that one SMD or a pair of TCs is able to cover both GW polarization amplitudes from almost all incoming directions. We discuss the achievable enhancement in tackling the inverse problem for high frequency [~(2–5) kHz] GWs by adding a TC detector to the future advanced LIGO–VIRGO network

False discovery rate: setting the probability of false claim of detection

When testing multiple hypothesis in a survey --e.g. many different source locations, template waveforms, and so on-- the final result consists in a set of confidence intervals, each one at a desired confidence level. But the probability that at least one of these intervals does not cover the true value increases with the number of trials. With a sufficiently large array of confidence intervals, one can be sure that at least one is missing the true value. In particular, the probability of false claim of detection becomes not negligible. In order to compensate for this, one should increase the confidence level, at the price of a reduced detection power. False discovery rate control is a relatively new statistical procedure that bounds the number of mistakes made when performing multiple hypothesis tests. We shall review this method, discussing exercise applications to the field of gravitational wave surveys.Comment: 7 pages, 3 table, 3 figures. Prepared for the Proceedings of GWDAW 9 (http://lappc-in39.in2p3.fr/GWDAW9) A new section was added with a numerical example, along with two tables and a figure related to the new section. Many smaller revisions to improve readibilit

Oxidation of sulphur dioxide in water droplets in the presence of ammonia

SO2 oxidation by oxygen in monodisperse water droplets was studied in a cylindrical chamber, without and in the presence of ammonia. The range of SO2 concentration was from about 1022 to 5 ppmv, while the NH3 input concentration was kept constant at about 4.731022 ppmv. The contact time between gases and droplets was 210 s. The experimental results were compared with the theoretical values predicted by the kinetics of Larson et al. (Atmos. Environ., 12 (1978) 1597) and McKay (Atmos. Environ., 5 (1971) 7). Much higher sulphate concentrations were obtained in experiments run in the presence of NH3, as opposed to those without NH3. The experimental results agree with the values predicted by McKay’s kinetics and are higher than Larson’s

SO2 oxidation in supercooled droplets in the presence of O2

Sulphur dioxide oxidation in supercooled monodisperse droplets at T4213 7C was studied in the presence of oxygen. The SO2 concentration was found to range from 0.08 to 7.1 ppmv and the contact time between gases and droplets was 210 s. The experimental results showed that sulphate concentration due to SO2 oxidation is independent of temperature, i.e. the increase of SO2 solubility in the liquid phase balances the rate constant decrease of the oxidation reaction. Following McKay’s kinetics (Atmos. Environ., 5 (1971) 7), we calculated the rate constant at T4213 7C and the activation energy. A comparison was made between experimental S(VI) oxidation concentrations due to oxygen and theoretical oxidation values due to O3, H2O2 and oxygen in the presence of catalyzers (Fe31, Mn21)

Inhomogeneous mechanical losses in micro-oscillators with high reflectivity coating

We characterize the mechanical quality factor of micro-oscillators covered by a highly reflective coating. We test an approach to the reduction of mechanical losses, that consists in limiting the size of the coated area to reduce the strain and the consequent energy loss in this highly dissipative component. Moreover, a mechanical isolation stage is incorporated in the device. The results are discussed on the basis of an analysis of homogeneous and non-homogeneous losses in the device and validated by a set of Finite-Element models. The contributions of thermoelastic dissipation and coating losses are separated and the measured quality factors are found in agreement with the calculated values, while the absence of unmodeled losses confirms that the isolation element integrated in the device efficiently uncouples the dynamics of the mirror from the support system. Also the resonant frequencies evaluated by Finite-Element models are in good agreement with the experimental data, and allow the estimation of the Young modulus of the coating. The models that we have developed and validated are important for the design of oscillating micro-mirrors with high quality factor and, consequently, low thermal noise. Such devices are useful in general for high sensitivity sensors, and in particular for experiments of quantum opto-mechanics

Prospects for intermediate mass black hole binary searches with advanced gravitational-wave detectors

We estimated the sensitivity of the upcoming advanced, ground-based gravitational-wave observatories (the upgraded LIGO and Virgo and the KAGRA interferometers) to coalescing intermediate mass black hole binaries (IMBHB). We added waveforms modeling the gravitational radiation emitted by IMBHBs to detectors' simulated data and searched for the injected signals with the coherent WaveBurst algorithm. The tested binary's parameter space covers non-spinning IMBHBs with source-frame total masses between 50 and 1050 $\text{M}_{\odot}$ and mass ratios between $1/6$ and 1$\,$. We found that advanced detectors could be sensitive to these systems up to a range of a few Gpc. A theoretical model was adopted to estimate the expected observation rates, yielding up to a few tens of events per year. Thus, our results indicate that advanced detectors will have a reasonable chance to collect the first direct evidence for intermediate mass black holes and open a new, intriguing channel for probing the Universe over cosmological scales.Comment: 9 pages, 4 figures, corrected the name of one author (previously misspelled

Selective readout and back-action reduction for wideband acoustic gravitational wave detectors

We present the concept of selective readout for broadband resonant mass gravitational wave detectors. This detection scheme is capable of specifically selecting the signal from the contributions of the vibrational modes sensitive to the gravitational waves, and efficiently rejecting the contribution from non gravitationally sensitive modes. Moreover this readout, applied to a dual detector, is capable to give an effective reduction of the back-action noise within the frequency band of interest. The overall effect is a significant enhancement in the predicted sensitivity, evaluated at the standard quantum limit for a dual torus detector. A molybdenum detector, 1 m in diameter and equipped with a wide area selective readout, would reach spectral strain sensitivities 2x10^{-23}/sqrt{Hz} between 2-6 kHz.Comment: 9 pages, 4 figure

Enhancing the significance of gravitational wave bursts through signal classification

The quest to observe gravitational waves challenges our ability to discriminate signals from detector noise. This issue is especially relevant for transient gravitational waves searches with a robust eyes wide open approach, the so called all- sky burst searches. Here we show how signal classification methods inspired by broad astrophysical characteristics can be implemented in all-sky burst searches preserving their generality. In our case study, we apply a multivariate analyses based on artificial neural networks to classify waves emitted in compact binary coalescences. We enhance by orders of magnitude the significance of signals belonging to this broad astrophysical class against the noise background. Alternatively, at a given level of mis-classification of noise events, we can detect about 1/4 more of the total signal population. We also show that a more general strategy of signal classification can actually be performed, by testing the ability of artificial neural networks in discriminating different signal classes. The possible impact on future observations by the LIGO-Virgo network of detectors is discussed by analysing recoloured noise from previous LIGO-Virgo data with coherent WaveBurst, one of the flagship pipelines dedicated to all-sky searches for transient gravitational waves