A study of the interaction of cationic dyes with gold nanostructures

The interaction of methylene blue and crystal violet dyes with a range of gold nanoparticles (AuNPs), gold nanoclusters and gold/silver nanoclusters is reported

Biomechanical analysis of the upper body during overhead industrial tasks using electromyography and motion capture integrated with digital human models

In this paper, we present a biomechanical analysis of the upper body, which includes upper-limb, neck and trunk, during the execution of overhead industrial tasks. The analysis is based on multiple performance metrics obtained from a biomechanical analysis of the worker during the execution of a specific task, i.e. an overhead drilling task, performed at different working heights. The analysis enables a full description of human movement and internal load state during the execution of the task, thought the evaluation of joint angles, joint torques and muscle activations. A digital human model is used to simulate and replicate the worker’s task in a virtual environment. The experiments were conduced in laboratory setting, where four subjects, with different anthropometric characteristics, have performed 48 drilling tasks in two different working heights defined as low configuration and middle configuration. The results of analysis have impact on providing the best configuration of the worker within the industrial workplace and/or providing guidelines for developing assistance devices which can reduce the physical overloading acting on the worker’s body

Efficacy and safety of topical vitamin E for the treatment of chemotherapy skin reactions

Introduction. Skin is a specific target of new cancer treatments. Xerosis, inflammatory lesions and radiodermatitis are the most frequent skin reactions. They can decries patients quality of life and compromise their compliance with cancer therapy. Vitamin E is well known for its antioxidant action, for which it is used in many inflammatory skin diseases. We evaluated the efficacy and safety of a medical device based on vitamin E for the treatment of xerosis, of consequent effects of papulopustular rash and radiodermatitis. Materials and methods. We selected 20 women between 35 and 60 years old, affected by xerosis, consequent effects of papulopustular rash and radiodermatitis. The protocol provided for the application of a topical product consisting of tocopherols and tocotrienols to 10% to 0.3% twice a day to the affected area. The evaluations were carried out at the beginning of treatment (TO) and after 40 days (T1) using the following methods: photographic assessment; clinical evaluation; evaluation of Trans Epidermal Water Loss (TEWL) by corneometry; assessment of skin color by colorimeter X-Rite̊ 968 according to the L *a*b* system; assessment of tolerability with a questionnaire; assessment of adherence to therapy through the completion of a daily diary. Statistical analysis was performed by calculating the Student's t. Results. Photographic evaluation shows a significant improvement of the lesions from T0 to T1. Clinical evaluation showed a good improvement in 13 of 20 patients (65 %). TEWL in patients with xerosis went from a value of 19.86 at T0 to a mean value of 14.62 at T1. The outcomes of patients with papulopustular rash presented at T0 an average value of TEWL of 17,25, which was of 15.42 at T1. In patients with previous radiodermatitis, the TEWL was 35.06 at T0 and it was 13.23 at T1. Colorimetry showed a L * value of 58,06 at T0 while it was 60.04 at T1 in patients with xerosis. Patients with previous papulopustular rash presented at T0 an average value of L* of 57.33 while at T1 this was 59.67. In patients with an outcome of radiodermatitis the average went from 53.12 at T0 to 59.91 T1. Tolerability was excellent in 100% of cases. The analysis of the diaries of application of the product showed a good adherence to therapy. Discussion and conclusions. The preparation based on tocopherol and tocotrienols showed an excellent efficacy profile, a good tolerability and safety profile and an excellent profile of adherence

Kinetics-based design of a flow platform for highly reproducible on demand synthesis of gold nanoparticles with controlled size between 50 and 150 nm and their application in SERS and PIERS sensing

Seeded-growth synthetic protocols enable precise control of particle size and shape, crucial for many sensing applications. However, scaling-up these syntheses in a reproducible way is challenging, as minimal variation in process parameters such as seed size, concentration or reaction temperature can significantly alter the final product. Flow reactors enable tight control in the process parameters and high reproducibility of the synthesis, representing a potential technology to perform seeded-growth syntheses in large scale. This work reports the design of a flow platform for the controlled synthesis of spherical gold nanoparticles with size up to 150nm through a seeded-growth approach, and their use in Surface Enhanced Raman Scattering (SERS) and Photoinduced Enhanced Raman Spectroscopy (PIERS). The particle growth kinetics were studied via in situ time-resolved UV–Vis spectroscopy. The spectroscopic data were fitted with a kinetic model, which was subsequently used for the design of the reactor. The kinetics-based design approach enabled fast translation of the growth synthesis in flow, eventually allowing the on demand flow synthesis of particles with controllable size, ranging from 50 to 150nm, with high reproducibility and full precursor conversion. The particles were tested for SERS and PIERS for different substrates, including warfare agents and biomolecules, with enhancement factors between 103 and 108 depending on the analyte, demonstrating their potential for detection of various analytes

Single-Cell RNA Sequencing Analysis: A Step-by-Step Overview

Thanks to innovative sample-preparation and sequencing technologies, gene expression in individual cells can now be measured for thousands of cells in a single experiment. Since its introduction, single-cell RNA sequencing (scRNA-seq) approaches have revolutionized the genomics field as they created unprecedented opportunities for resolving cell heterogeneity by exploring gene expression profiles at a single-cell resolution. However, the rapidly evolving field of scRNA-seq invoked the emergence of various analytics approaches aimed to maximize the full potential of this novel strategy. Unlike population-based RNA sequencing approaches, scRNA seq necessitates comprehensive computational tools to address high data complexity and keep up with the emerging single-cell associated challenges. Despite the vast number of analytical methods, a universal standardization is lacking. While this reflects the fields’ immaturity, it may also encumber a newcomer to blend in. In this review, we aim to bridge over the abovementioned hurdle and propose four ready-to-use pipelines for scRNA-seq analysis easily accessible by a newcomer, that could fit various biological data types. Here we provide an overview of the currently available single-cell technologies for cell isolation and library preparation and a step by step guide that covers the entire canonical analytic workflow to analyse scRNA-seq data including read mapping, quality controls, gene expression quantification, normalization, feature selection, dimensionality reduction, and cell clustering useful for trajectory inference and differential expression. Such workflow guidelines will escort novices as well as expert users in the analysis of complex scRNA-seq datasets, thus further expanding the research potential of single-cell approaches in basic science, and envisaging its future implementation as best practice in the field

A Modular Millifluidic Platform for the Synthesis of Iron Oxide Nanoparticles with Control over Dissolved Gas and Flow Configuration

Gas–liquid reactions are poorly explored in the context of nanomaterials synthesis, despite evidence of significant effects of dissolved gas on nanoparticle properties. This applies to the aqueous synthesis of iron oxide nanoparticles, where gaseous reactants can influence reaction rate, particle size and crystal structure. Conventional batch reactors offer poor control of gas–liquid mass transfer due to lack of control on the gas–liquid interface and are often unsafe when used at high pressure. This work describes the design of a modular flow platform for the water-based synthesis of iron oxide nanoparticles through the oxidative hydrolysis of Fe2+ salts, targeting magnetic hyperthermia applications. Four different reactor systems were designed through the assembly of two modular units, allowing control over the type of gas dissolved in the solution, as well as the flow pattern within the reactor (single-phase and liquid–liquid two-phase flow). The two modular units consisted of a coiled millireactor and a tube-in-tube gas–liquid contactor. The straightforward pressurization of the system allows control over the concentration of gas dissolved in the reactive solution and the ability to operate the reactor at a temperature above the solvent boiling point. The variables controlled in the flow system (temperature, flow pattern and dissolved gaseous reactants) allowed full conversion of the iron precursor to magnetite/maghemite nanocrystals in just 3 min, as compared to several hours normally employed in batch. The single-phase configuration of the flow platform allowed the synthesis of particles with sizes between 26.5 nm (in the presence of carbon monoxide) and 34 nm. On the other hand, the liquid–liquid two-phase flow reactor showed possible evidence of interfacial absorption, leading to particles with different morphology compared to their batch counterpart. When exposed to an alternating magnetic field, the particles produced by the four flow systems showed ILP (intrinsic loss parameter) values between 1.2 and 2.7 nHm2/kg. Scale up by a factor of 5 of one of the configurations was also demonstrated. The scaled-up system led to the synthesis of nanoparticles of equivalent quality to those produced with the small-scale reactor system. The equivalence between the two systems is supported by a simple analysis of the transport phenomena in the small and large-scale setup

Microfluidic synthesis of protein-loaded nanogels in a coaxial flow reactor using a design of experiments approach

Ionic gelation is commonly used to generate nanogels but often results in poor control over size and polydispersity. In this work we present a novel approach to the continuous manufacture of protein-loaded chitosan nanogels using microfluidics whereby we demonstrate high control and uniformity of the product characteristics. Specifically, a coaxial flow reactor (CFR) was employed to control the synthesis of the nanogels, comprising an inner microcapillary of internal diameter (ID) 0.595 mm and a larger outer glass tube of ID 1.6 mm. The CFR successfully facilitated the ionic gelation process via chitosan and lysozyme flowing through the inner microcapillary, while cross-linkers sodium tripolyphosphate (TPP) and 1-ethyl-2-(3-dimethylaminopropyl)-carbodiimide (EDC) flowed through the larger outer tube. In conjunction with the CFR, a four-factor three-level face-centered central composite design (CCD) was used to ascertain the relationship between various factors involved in nanogel production and their responses. Specifically, four factors including chitosan concentration, TPP concentration, flow ratio and lysozyme concentration were investigated for their effects on three responses (size, polydispersity index (PDI) and encapsulation efficiency (% EE)). A desirability function was applied to identify the optimum parameters to formulate nanogels in the CFR with ideal characteristics. Nanogels prepared using the optimal parameters were successfully produced in the nanoparticle range at 84 ± 4 nm, showing a high encapsulation efficiency of 94.6 ± 2.9% and a high monodispersity of 0.26 ± 0.01. The lysis activity of the protein lysozyme was significantly enhanced in the nanogels at 157.6% in comparison to lysozyme alone. Overall, the study has demonstrated that the CFR is a viable method for the synthesis of functional nanogels containing bioactive molecules

Development of site-specific biomechanical indices for estimating injury risk in cycling

In this paper we present novel biomechanical indices for site-specific assessment of injury risk in cycling. The indices are built from a multifactorial analysis based on the kinematics and kinetics of the cyclist from the biomechanical side, and muscle excitations and muscle synergies from the neurophysiological side. The indices are specifics for three body regions (back, knee, ankle) which are strongly affected by overuse injuries in cycling. We use these indices for injury risks analysis of a recreational cyclist, who offered to participate in the experiments. The preliminary results are promising towards the use of such indices for planning and/or evaluating training schedule with the final goal of reducing non-traumatic injuries in cycling

Highly reproducible, high-yield flow synthesis of gold nanoparticles based on a rational reactor design exploiting the reduction of passivated Au(III)

Reproducibility in the synthesis of nanomaterials is a crucial aspect for their real-life applications. It is particularly pertinent in the context of gold nanoparticles, where a plethora of seeded-growth methods are being developed to control particle morphology and size. The translation of such methods to manufacturing can be hindered by poor reproducibility of the seed production step. This study focuses on the development of a highly reproducible platform for the synthesis of gold nanoparticles, as potential substrates for glucose sensing. A flow reactor was designed, starting from a detailed study of the synthesis in batch. The well-established Turkevich synthesis was investigated via in situ time-resolved UV-vis spectroscopy. In order to enhance the reproducibility of the synthesis the effect of passivating the gold precursor stock before its use in the synthesis was investigated. It is shown that starting from a pre-passivated precursor provided improved control over the initial reaction stage, at the expense of a small increase in the reaction time. At the optimal reaction conditions, the proposed modified Turkevich method allowed for the synthesis in batch of ∼12 nm monodisperse (RSD ∼10%) particles, with a variability from batch to batch of only ∼5%. The information gathered from the batch study, in particular the reaction time, was used to translate the synthesis from batch to flow. The system utilized for the flow synthesis consisted of a segmented flow reactor, where an organic stream was employed to segment the reactive aqueous stream to avoid reactor fouling and improve monodispersity. The use of segmented flow enables treating each droplet as a “travelling batch”, hence allowing the direct use of the kinetic data obtained in batch to design the flow reactor, leading to the rapid identification of the minimum residence time to allow for reaction completion. The flow reactor enabled the synthesis of ∼11 nm monodisperse (RSD ∼10%) particles, with full precursor conversion and reproducibility between reactor runs higher than that obtained in batch (variability of ∼2%). The flow-produced gold nanoparticles were tested for glucose sensing, exploiting their glucose oxidase-mimicking behaviour and demonstrated satisfactory glucose detection in the range of 1–10 mM