21,663 research outputs found
An efficient prebreathing apparatus for humans during decompression
Portable prebreathing system was developed which recirculates and reconditions respiratorily exhaled oxygen. Apparatus reduces fire hazards, simplifies prebreathing procedures, and does not require extensive enclosure venting system usage
Modelling of Electroluminescence in Polymers Using a Bipolar Charge Transport Model
Electroluminescence (EL) in polymeric materials is thought to occur due to the energy dissipation process from the recombination of opposite polarity charge carriers. It is considered as an indication of storage and transport of charge carriers in cable insulation subject to electrical stresses and may indicate the change in charge movement due to aging or degradation processes. Under ac electric fields, the interaction of opposite polarity charge carriers at the interface of polymer/conductor is enhanced compared with dc conditions, and seems to contribute a lot to the electroluminescence rather than the charge behaviours in the bulk of polymers. The dynamics of charge carriers both at the interface of polymer/conductor and in the bulk of polymers is investigated through a simulation work using a bipolar charge transport model. Figure 1 compares experimental electroluminescence results with simulated data from the recombination of injected charge carriers. The paper will give more details on EL model and comparison under various waveforms and frequencies
A Comparison between Electroluminescence Models and Experimental Results
Electrical insulation ages and degrades until its eventual failure under electrical stress. One cause of this relates to the movement and accumulation of charge within the insulation. The emission of a low level of light from polymeric materials while under electrical stressing occurs before the onset of currently detectable material degradation. This light is known as electroluminescence (EL) and under an ac electric field is thought to relate to the interaction of charge in close proximity to the electrode-polymer interface. Understanding the cause of this light emission gives a very high-resolution method of monitoring charge interaction and its influence on material ageing. A possible cause of this light emission is the bipolar charge recombination theory. This theory involves the injection, trapping and recombination of charge carriers during each half cycle of the applied field [1]. This work compares two models that to simulate the EL emission according to this bipolar charge recombination theory. Model 1 assumes a fixed space charge region and all injected charge is uniformly distributed in this region with charges able to either become trapped or to recombine with opposite polarity charge carriers [2]. This recombination relates directly the excitation needed for the emission of a photon of light as measured in experiments. Model 2 develops on this by accounting for the transport and extraction of charge with an exponential distribution of trap levels rather than a uniform distribution [3]. Figure 1 shows a good correlation between the two models and experimental data. The full paper will describe the models in more detail and present results comparing the simulated and experimental results under various applied waveforms. Model 1 and model 2 both provide a good correlation with experimental data but model 2 allows a greater understanding of the space charge profile in the region close to the electrodes as well as the shape of the conduction current. Further work involves developing these models to support changes in the charge trapping profiles due to material ageing and supporting simulated results with measured conduction current
Decay rate and other properties of the positronium negative ion
A new method for detecting the positronium minus ion is described, and the possibility of a long positronium mean free path in a solid is discussed
An Assessment of the Health Financing System in Tanzania: Implications for Equity and Social Health Insurance: Report on Shield Work Package 1
An investigation into the effect of thickness of titanium dioxide and gold-silver nanoparticle titanium dioxide composite thin-films on photocatalytic activity and photo-induced oxygen production in a sacrificial system
Thin films of titanium dioxide and titanium dioxide with incorporated gold and silver nanoparticles were deposited onto glass microscope slides, steel and titanium foil coupons by two sol–gel dip-coating methods. The film's photocatalytic activity and ability to evolve oxygen in a sacrificial solution were assessed. It was found that photocatalytic activity increased with film thickness (from 50 to 500 nm thick samples) for the photocatalytic degradation of methylene blue in solution and resazurin redox dye in an intelligent ink dye deposited on the surface. Contrastingly, an optimum film thickness of [similar]200 nm for both composite and pure films of titanium dioxide was found for water oxidation, using persulfate (S2O82−) as a sacrificial electron acceptor. The nanoparticle composite films showed significantly higher activity in oxygen evolution studies compared with plain TiO2 films
Antechamber facilitates loading and unloading of vacuum furnace
Antechamber facilitates the use of a furnace in which materials are heat treated in a high vacuum or a gas atmosphere. It has a high vacuum pumping system, a means for backfilling with a selected gas, an access door, glove ports, and a motor driven platform
Strongly Enhanced Hole-Phonon Coupling in the Metallic State of the Dilute Two-Dimensional Hole Gas
We have studied the temperature dependent phonon emission rate () of a
strongly interacting (22) dilute 2D GaAs hole system using a standard
carrier heating technique. In the still poorly understood metallic state, we
observe that () changes from () to ()
above 100mK, indicating a crossover from screened piezoelectric(PZ) coupling to
screened deformation potential(DP) coupling for hole-phonon scattering.
Quantitative comparison with theory shows that the long range PZ coupling
between holes and phonons has the expected magnitude; however, in the metallic
state, the short range DP coupling between holes and phonons is {\it almost
twenty times stronger} than expected from theory. The density dependence of
() shows that it is {\it easier} to cool low density 2D holes in GaAs
than higher density 2D hole systems.Comment: To appear in Phys. Rev. Let
Joint Custody as a Parenting Alternative
Joint custody of children has been a recently accepted alternative to the traditional child custody/visitation orders that usually follow dissolution proceedings. In 1980, California became one of the first states to provide, by statute, a presumption in favor of an award of joint custody to the parents. The authors present the legislative history of this joint custody statute and synthesize the various views that have been expressed on the subject of joint custody. Also presented is a discussion of the legislative intent behind the statute and whether the current law is the most effective means of protecting the best interests of the child and of assuring minor children of frequent and continuing contact with both parents after a marital dissolution
- …