11,515 research outputs found
Real time resource scheduling within a distributed collaborative design environment
Operational design co-ordination is provided by a Virtual Integration Platform (VIP) that is capable of scheduling and allocating design activities to organisationally and geographically distributed designers. To achieve this, the platform consists of a number of components that contribute to the engineering management and co-ordination of data, resources, activities, requirements and processes. The information required to schedule and allocate activities to designers is defined in terms of: the designers' capability to perform particular design activities; commitment in terms of the design activities that it is currently performing, and capacity to perform more than one design activity at the same time as well as the effect of increased capacity on capability. Previous approaches have been developed by the authors to automatically allocate resources to activities [1-3], however these approaches have generally been applied either within the context of real-time allocation of computational resources using automated design tools, or in the planning of human resources within future design projects and not for the real-time allocation of activities to a combination of human and computational resources. The procedure presented here is based upon this previous research and involves: the determination of the design activities that need to be undertaken on the basis of the goals that need to be achieved; identification of the resources that can undertake these design activities; and, the use of a genetic algorithm to optimally allocate the activities to the resources. Since the focus of the procedure is toward the real-time allocation of design activities to designers, additional human issues with respect to scheduling are considered. These human issues aspects include: consideration of the improvement in performance as a result of the experience gained from undertaking the activity; provision of a training period to allow inexperienced designers the opportunity to improve their performance without their performance being assessed; and the course of action to take when a designer is either unwilling or unable to perform an activity
Real-time co-ordinated resource management in a computational enviroment
Design co-ordination is an emerging engineering design management philosophy with its emphasis on timeliness and appropriateness. Furthermore, a key element of design coordination has been identified as resource management, the aim of which is to facilitate the optimised use of resources throughout a dynamic and changeable process. An approach to operational design co-ordination has been developed, which incorporates the appropriate techniques to ensure that the aim of co-ordinated resource management can be fulfilled. This approach has been realised within an agent-based software system, called the Design Coordination System (DCS), such that a computational design analysis can be managed in a coherent and co-ordinated manner. The DCS is applied to a computational analysis for turbine blade design provided by industry. The application of the DCS involves resources, i.e. workstations within a computer network, being utilised to perform the computational analysis involving the use of a suite of software tools to calculate stress and vibration characteristics of turbine blades. Furthermore, the application of the system shows that the utilisation of resources can be optimised throughout the computational design analysis despite the variable nature of the computer network
A methodology for design coordination in a distributed computing environment
At the conceptual stage of the design process it is increasingly common that analysis tools are involved in the evaluation of a large number of alternative designs. Designers use such analysis tools to assist with large scale concept evaluations and the prediction of good initial designs. Consequently there exists a need to coordinate these analysis tools to enable the early stage of design to be performed in a timely and efficient manner. This paper describes a generic methodology that allows the management and coordination of design analysis tools. A Computer Aided Design tool, namely the Design Coordination System (DCS), has been developed to assist the designer in performing computational analysis in a distributed computing environment. Within the DCS, a collection of design agents act as members of a multi-functional team operating in a cooperative and coordinated manner in order to satisfy the objective of efficiently performing the design analysis
3D Simulation of Partial Discharge in High Voltage Power Networks
Open accessPartial discharge (PD) events arise inside power cables due to defects of cableâs insulation material, characterized by a lower electrical breakdown strength than the surrounding dielectric material. These electrical discharges cause signals to propagate along the cable, manifesting as noise phenomena. More significantly, they contribute to insulation degradation and can produce a disruptive effect with a consequent interruption of power network operation. PD events are, therefore, one of the best âearly warningâ indicators of insulation degradation and, for this reason, the modeling and studying of such phenomena, together with the development of on-line PDs location methods, are important topics for network integrity assessment, and to define methods to improve the power networksâ Electricity Security. This paper presents a 3D model of PD events inside a void in epoxy-resin insulation cables for High Voltage (HV) power networks. The 3D model has been developed using the High Frequency (HF) Solver of CST Studio SuiteÂź software. PD events of a few ”s duration have been modelled and analyzed. The PD behavior has been investigated using varying electrical stress. A first study of the PD signal propagation in a power network is described
A generic coordination approach applied to a manufacturing environment
This paper describes a generic coordination approach applied to the field of manufacturing engineering. The objective of the coordination mechanism with respect to this application is twofold. Firstly, it is shown that utilising the developed system can result in the efficient organisation of processes leading to a near optimum time taken to manufacture a number of artefacts. Secondly, successful operation of the system in this environment will demonstrate that the approach is generic in nature. The results already achieved using this system within a computational analysis environment supports this hypothesis
A methodology for prospective operational design co-ordination
Engineering companies are continually faced with the challenge of how best to utilise their design team given some design project. Decisions regarding how to distribute the project workload amongst the members of the design team are the responsibility of a project manager who, in order to do this, often relies upon previous experience and/or the support of some planning tool. Furthermore, a project manager rarely has the opportunity to assess the capability of the design team against the current work load in order to determine what, if any, alterations couldbe made to the team to facilitate appropriate reductions in project time and cost.This paper proposes a mathematical-based methodology aimed at identifying shortfalls in design teams, which if remedied would result in a more efficient project in terms of time and cost. The methodology provides a means of identifying those skills within the design team,with respect to the outstanding work load, in which improvements would have the greatest influence on reducing time and cost. In addition, the methodology employs a genetic algorithm for the purpose of scheduling tasks to be undertaken by potential design teams. The methodology is applied to two practical case studies provided by engineering industry.The first case study involves the assessment of a multi-disciplined design team consisting of single-skilled engineers. In contrast, the second case study entails the assessment of multiskilled engineers within a multi-disciplined design team. As a result of applying the methodology to the case studies, potential improvement to the design teams are identified and, subsequently, evaluated by observing their effects
Three-dimensional coating and rimming flow: a ring of fluid on a rotating horizontal cylinder
The steady three-dimensional flow of a thin, slowly varying ring of Newtonian fluid on either the outside or the inside of a uniformly rotating large horizontal cylinder is investigated. Specifically, we study âfull-ringâ solutions, corresponding to a ring of continuous, finite and non-zero thickness that extends all the way around the cylinder. In particular, it is found that there is a critical solution corresponding to either a critical load above which no full-ring solution exists (if the rotation speed is prescribed) or a critical rotation speed below which no full-ring solution exists (if the load is prescribed). We describe the behaviour of the critical solution and, in particular, show that the critical flux, the critical load, the critical semi-width and the critical ring profile are all increasing functions of the rotation speed. In the limit of small rotation speed, the critical flux is small and the critical ring is narrow and thin, leading to a small critical load. In the limit of large rotation speed, the critical flux is large and the critical ring is wide on the upper half of the cylinder and thick on the lower half of the cylinder, leading to a large critical load.\ud
\ud
We also describe the behaviour of the non-critical full-ring solution, and, in particular, show that the semi-width and the ring profile are increasing functions of the load but, in general, non-monotonic functions of the rotation speed. In the limit of large rotation speed, the ring approaches a limiting non-uniform shape, whereas in the limit of small load, the ring is narrow and thin with a uniform parabolic profile. Finally, we show that, while for most values of the rotation speed and the load the azimuthal velocity is in the same direction as the rotation of the cylinder, there is a region of parameter space close to the critical solution for sufficiently small rotation speed in which backflow occurs in a small region on the right-hand side of the cylinder
A flight investigation of simulated data link communications during single-pilot IFR flight
A Flight Data Console (FDC) was developed to allow simulation of a digital communications link to replace the current voice communication system used in air traffic control (ATC). The voice system requires manipulation of radio equipment, read-back of clearances, and mental storage of critical information items, all contributing to high workload, particularly during single-pilot operations. This was an inflight study to determine how a digital communications system might reduce cockpit workload, improve flight proficiency, and be accepted by general aviation pilots. Results show that instrument flight, including approach and landing, can be accomplished quite effectively using a digital data link system for ATC communications. All pilots expressed a need for a back-up voice channel. When included, this channel was used sparingly and principally to confirm any item of information about which there might be uncertainty
- âŠ