11,954 research outputs found

    Highlight: 29th Winter School on Proteinases and Their Inhibitors

    Get PDF

    Mass dependent Evolution of Field Early-Type Galaxies Since z=1

    Full text link
    We present the Fundamental Plane (FP) of field early-type galaxies at 0.5<z<1.0. Our project is a continuation of our efforts to understand the formation and evolution of early-type galaxies in different environments. The target galaxies were selected from the comprehensive and homogeneous data set of the Gemini/HST Galaxy Cluster Project. The distant field early-type galaxies follow a steeper FP relation compared to the local FP. The change in the slope of the FP can be interpreted as a mass-dependent evolution. Similar results have been found for cluster early-type galaxies in high redshift galaxy clusters at 0.8<z<1. Therefore, the slope change of the FP appears to be independent of the environment of the galaxies.Comment: 2 pages, 1 figure, to appear in the proceedings of the IAU Symposium no. 262, "Stellar Populations - Planning for the Next Decade", eds. G. R. Bruzual and S. Charlo

    The aerodynamic effects of wing–wing interaction in flapping insect wings

    Get PDF
    We employed a dynamically scaled mechanical model of the small fruit fly Drosophila melanogaster (Reynolds number 100–200) to investigate force enhancement due to contralateral wing interactions during stroke reversal (the 'clap-and-fling'). The results suggest that lift enhancement during clap-and-fling requires an angular separation between the two wings of no more than 10–12°. Within the limitations of the robotic apparatus, the clap-and-fling augmented total lift production by up to 17%, but depended strongly on stroke kinematics. The time course of the interaction between the wings was quite complex. For example, wing interaction attenuated total force during the initial part of the wing clap, but slightly enhanced force at the end of the clap phase. We measured two temporally transient peaks of both lift and drag enhancement during the fling phase: a prominent peak during the initial phase of the fling motion, which accounts for most of the benefit in lift production, and a smaller peak of force enhancement at the end fling when the wings started to move apart. A detailed digital particle image velocimetry (DPIV) analysis during clap-and-fling showed that the most obvious effect of the bilateral 'image' wing on flow occurs during the early phase of the fling, due to a strong fluid influx between the wings as they separate. The DPIV analysis revealed, moreover, that circulation induced by a leading edge vortex (LEV) during the early fling phase was smaller than predicted by inviscid two-dimensional analytical models, whereas circulation of LEV nearly matched the predictions of Weis-Fogh's inviscid model at late fling phase. In addition, the presence of the image wing presumably causes subtle modifications in both the wake capture and viscous forces. Collectively, these effects explain some of the changes in total force and lift production during the fling. Quite surprisingly, the effect of clap-and-fling is not restricted to the dorsal part of the stroke cycle but extends to the beginning of upstroke, suggesting that the presence of the image wing distorts the gross wake structure throughout the stroke cycle

    A Comparison of Algorithms for the Multivariate L1-Median

    Get PDF
    The L1-median is a robust estimator of multivariate location with good statistical properties. Several algorithms for computing the L1- median are available. Problem speci c algorithms can be used, but also general optimization routines. The aim is to compare dierent algorithms with respect to their precision and runtime. This is pos- sible because all considered algorithms have been implemented in a standardized manner in the open source environment R. In most sit- uations, the algorithm based on the optimization routine NLM (non- linear minimization) clearly outperforms other approaches. Its low computation time makes applications for large and high-dimensional data feasible.Algorithm;Multivariate median;Optimization;Robustness

    Rapid, Low Level Determination of Silver(I) in Drinking Water by Colorimetric–solid-phase Extraction

    Get PDF
    A rapid, highly sensitive two-step procedure for the trace analysis of silver(I) is described. The method is based on: (1) the solid-phase extraction (SPE) of silver(I) from a water sample onto a disk impregnated with a silver-selective colorimetric reagent, and (2) the determination of the amount of complexed analyte extracted by the disk by diffuse reflectance spectroscopy (DRS). This method, called colorimetric–solid-phase extraction (C–SPE), was recently shown effective in determining low concentrations (0.1–5.0 mg/ml) of iodine and iodide in drinking water. This report extends C–SPE to the trace (∼4 μg/l) level monitoring of silver(I) which is a biocide used on the International Space Station (ISS). The determination relies on the manually driven passage of a water sample through a polystyrene–divinylbenzene disk that has been impregnated with the colorimetric reagent 5-(p-dimethylaminobenzylidene) rhodanine (DMABR) and with an additive such as a semi-volatile alcohol (1,2-decanediol) or nonionic surfactant (Brij 30). The amount of concentrated silver(I) is then determined in a few seconds by using a hand-held diffuse reflectance spectrometer, with a total sample workup and readout time of ∼60 s. Importantly, the additive induces the uptake of water by the disk, which creates a local environment conducive to silver(I) complexation at an extremely high concentration factor (∼800). There is no detectable reaction between silver(I) and impregnated DMABR in the absence of the additive. This strategy represents an intriguing new dimension for C–SPE in which additives, directly loaded in the disk material, provide a means to manipulate the reactivity of the impregnated reagent

    Lateral sediment sources and knickzones as controls on spatio-temporal variations of sediment transport in an Alpine river

    Get PDF
    Modern mixed alluvial-bedrock channels in mountainous areas provide natural laboratories for understanding the time scales at which coarse-grained material has been entrained and transported from their sources to the adjacent sedimentary sink, where these deposits are preserved as conglomerates. This article assesses the shear stress conditions needed for the entrainment of the coarse-bed particles in the Glogn River that drains the 400 km2 Val Lumnezia basin, eastern Swiss Alps. In addition, quantitative data are presented on sediment transport patterns in this stream. The longitudinal stream profile of this river is characterized by three ca 500 m long knickzones where channel gradients range from 0·02 to 0·2 m m−1, and where the valley bottom confined into a <10 m wide gorge. Downstream of these knickzones, the stream is flat with gradients <0·01 m m−1 and widths ≥30 m. Measurements of the grain-size distribution along the trunk stream yield a mean D84 value of ca 270 mm, whereas the mean D50 is ca 100 mm. The consequences of the channel morphology and the grain-size distribution for the time scales of sediment transport were explored by using a one-dimensional step-backwater hydraulic model (Hydrologic Engineering Centre – River Analysis System). The results reveal that, along the entire trunk stream, a two to 10 year return period flood event is capable of mobilizing both the D50 and D84 fractions where the Shields stress exceeds the critical Shields stress for the initiation of particle motion. These return periods, however, varied substantially depending on the channel geometry and the pebble/boulder size distribution of the supplied material. Accordingly, the stream exhibits a highly dynamic boulder cover behaviour. It is likely that these time scales might also have been at work when coarse-grained conglomerates were constructed in the geological past

    Method of fabricating a photovoltaic module of a substantially transparent construction

    Get PDF
    A method characterized by the steps of positioning a plurality of uniformly dimensioned photovoltaic cells in registered relation with a plurality of openings formed in a planar tool is disclosed. The method allows acess to the P contact surface of each of the cells. The steps of the method are: (1) connecting the N contact surface of alternate cells to the P contact surface of the cells interposed therebetween, (2) removing therefrom residue of solder flux, (3) applying to the N contact surfaces of the cells a transparent adhesive, (4) placing a common transparent cover plate in engaged relation with the adhesive, (5) placing a film over the circular openings for hermetically sealing the openings, and (6) establishing a vacuum between the film and the cover plate

    Ring current proton decay by charge exchange

    Get PDF
    Explorer 45 measurements during the recovery phase of a moderate magnetic storm have confirmed that the charge exchange decay mechanism can account for the decay of the storm-time proton ring current. Data from the moderate magnetic storm of 24 February 1972 was selected for study since a symmetrical ring current had developed and effects due to asymmetric ring current losses could be eliminated. It was found that after the initial rapid decay of the proton flux, the equatorially mirroring protons in the energy range 5 to 30 keV decayed throughout the L-value range of 3.5 to 5.0 at the charge exchange decay rate calculated by Liemohn. After several days of decay, the proton fluxes reached a lower limit where an apparent equilibrium was maintained, between weak particle source mechanisms and the loss mechanisms, until fresh protons were injected into the ring current region during substorms. While other proton loss mechanisms may also be operating, the results indicate that charge exchange can entirely account for the storm-time proton ring current decay, and that this mechanism must be considered in all studies involving the loss of proton ring current particles

    NGC 4314. III. Inflowing Molecular Gas Feeding a Nuclear Ring of Star Formation

    Full text link
    NGC 4314 is an early-type barred galaxy containing a nuclear ring of recent star formation. We present CO(1-0) interferometer data of the bar and circumnuclear region with 2.3 x 2.2 arcsec spatial resolution and 13 km/s velocity resolution acquired at the Owens Valley Radio Observatory . These data reveal a clumpy circumnuclear ring of molecular gas. We also find a peak of CO inside the ring within 2 arcsec of the optical center that is not associated with massive star formation. We construct a rotation curve from these CO kinematic data and the mass model of Combes et al. (1992). Using this rotation curve, we have identified the location of orbital resonances in the galaxy. Assuming that the bar ends at corotation, the circumnuclear ring of star formation lies between two Inner Lindblad Resonances, while the nuclear stellar bar ends near the IILR. Deviations from circular motion are detected just beyond the CO and H-alpha ring, where the dust lanes along the leading edge of the bar intersect the nuclear ring. These non-circular motions along the minor axis correspond to radially inward streaming motions at speeds of 20 - 90 km/s and clearly show inflowing gas feeding an ILR ring. There are bright HII regions near the ends of this inflow region, perhaps indicating triggering of star formation by the inflow.Comment: 25 pages, uses aasms.sty. 7 Postscript figures, 12 JPEG figures. Figures may be retrieved from ftp://clyde.as.utexas.edu/pub/N4314COfigs.tar.g
    corecore