8,833 research outputs found
Trace element abundance determinations by Synchrotron X Ray Fluorescence (SXRF) on returned comet nucleus mineral grains
Trace element analyses were performed on bulk cosmic dust particles by Proton Induced X Ray Emission (PIXE) and Synchrotron X Ray Fluorescence (SXRF). When present at or near chondritic abundances the trace elements K, Ti, Cr, Mn, Cu, Zn, Ga, Ge, Se, and Br are presently detectable by SXRF in particles of 20 micron diameter. Improvements to the SXRF analysis facility at the National Synchrotron Light Source presently underway should increase the range of detectable elements and permit the analysis of smaller samples. In addition the Advanced Photon Source will be commissioned at Argonne National Laboratory in 1995. This 7 to 8 GeV positron storage ring, specifically designed for high-energy undulator and wiggler insertion devices, will be an ideal source for an x ray microprobe with one micron spatial resolution and better than 100 ppb elemental sensitivity for most elements. Thus trace element analysis of individual micron-sized grains should be possible by the time of the comet nucleus sample return mission
Some system considerations in configuring a digital flight control - navigation system
A trade study was conducted with the objective of providing a technical guideline for selection of the most appropriate computer technology for the automatic flight control system of a civil subsonic jet transport. The trade study considers aspects of using either an analog, incremental type special purpose computer or a general purpose computer to perform critical autopilot computation functions. It also considers aspects of integration of noncritical autopilot and autothrottle modes into the computer performing the critical autoland functions, as compared to the federation of the noncritical modes into either a separate computer or with a R-Nav computer. The study is accomplished by establishing the relative advantages and/or risks associated with each of the computer configurations
A study of trace contaminant identification by microwave double resonance spectroscopy
Trace contaminant identification using microwave double resonance spectroscop
Recommended from our members
An industrial profile of wood wool/cement slab manufacture
This profile describes a process developed at the Tropical Products Institute for the manufacture of wood wool/cement clabs. Unlike other commercially available processes this process involves the use of a cement slurry. The process is aimed at conditions in developing countries and significant features include minimum use of machinery, maximum use of labour, flexibility in production to suit market requirements and relatively low capital outlay. For a plant to produce 160 slabs per day, about £50,000 c.i.f. at September 1979 prices, excluding locally available items, is required. At least 28 employment opportunities are created. The profile includes a description of the process, a list of the machinery and equipment, components of capital cost, physical inputs and labour requirement
The separation of monocular and binocular contrast
AbstractThe contrast asynchrony is a stimulus configuration that illustrates the visual system’s separable responses to luminance and luminance contrast information (Shapiro, 2008; Shapiro et al., 2004). When two disks, whose luminances modulate in phase with each other, are each surrounded by a disk, one light and one dark, observers can see both the in-phase brightness signals and the antiphase contrast signals and can separate the two. Here we present the results of experiments in which observers viewed a similar stimulus dichoptically. We report that no asynchrony is perceived when one eye is presented with modulating disks and the other eye is presented with the black and white surround rings, nor is an asynchrony perceived in gradient versions of the contrast asynchrony. We also explore the “window shade illusion” (Shapiro, Charles, & Shear-Heyman, 2005) dichoptically and find that when a modulating disk is presented to one eye and a horizontally split black/white annulus is presented to the other, observers perceive a “shading” motion up and down the disk. This shading can be seen in either direction in the binocular condition, but it is almost always seen as moving towards low contrast in the monocular condition. These findings indicate the presence of separable retinal and cortical networks for contrast processing at different temporal and spatial scales
Towards a lattice determination of the coupling
The coupling is related to the form factor at zero
momentum of the axial current between - and -states. This form
factor is evaluated on the lattice using static heavy quarks and light quark
propagators determined by a stochastic inversion of the fermionic bilinear. The
\gBBP coupling is related to the coupling between heavy mesons and
low-momentum pions in the effective heavy meson chiral lagrangian. The coupling
of the effective theory can therefore be computed by numerical simulations. We
find the value . Besides its theoretical interest, the
phenomenological implications of such a determination are discussed.Comment: 20 pages, 6 figure
In situ aerosol measurements taken during the 2007 COPS field campaign at the Hornisgrinde ground site
Copyright @ 2011 Royal Meteorological Society.The Convective and Orographically-induced Precipitation Study (COPS) campaign was conducted during the summer of 2007. A suite of instruments housed at the top of the Hornisgrinde Mountain (1156 m) in the Black Forest region of south-west Germany provided datasets that allow an investigation into the physical, chemical and hygroscopic properties of the aerosol particles sampled during COPS. Organic mass loadings were found to dominate the aerosol composition for the majority of the project, exceeding 8 µg m−3 during a period of high pressure, high temperature, and low wind speed. The ratio of organic:sulphate sub-micron mass concentration exceeds 10:1 during the same time period. Back trajectories show air from this time-frame passing slowly over the local forest and not passing over any local anthropogenic sources. Occasional peaks in nitrate mass loadings were associated with changes in the typical wind direction from south-westerly to north-westerly where air had passed over the Stuttgart region. Size distribution data shows a dominant accumulation-mode when the measurement site was free from precipitation events. A sharp increase in ultrafine particle number concentration was seen during most days commencing around noon. The apparent growth of these particles is associated with an increase in organic mass loading, suggesting condensational growth. For the most part, with the exception of the high pressure period, the aerosol properties recorded during COPS were comparable to previous studies of continental aerosol properties.NER
A Kuiper Belt Source for Solar Flare Track-Rich Interplanetary Dust Particles
The presence of solar flare particle tracks in mineral grains within interplanetary dust particles (IDPs) has long been accepted as proof of their extraterrestrial origin [e.g. 1]. The 10-20 micrometers diameter IDPs released by dust producing objects in the solar system (mainly comets and asteroids) spiral in towards the Sun under the influence of Poynting-Robertson (PR) drag forces [2] and accumulate solar flare energetic particle tracks during their journey. The number of IDPs with well-constrained track density measurements is small, owing to the difficulty in the measurements and the lack of appropriatelysized crystals in which to image them. In order to use track densities as a chronometer of space exposure, the track production rate must be known. All previous work relied on track production rates determined by chemical etching techniques [e.g. 3], but tracks in IDPs are measured using TEM imaging. Here we report measurements of track densities in IDPs from both the anhydrous and hydrated IDP groups. Using the track production calibration determined from TEM observations of anorthite and olivine in lunar rock 64455 [4] we estimate space exposure times for these IDPs to constrain their parent body sources
Ultrashort Q-switched pulses from a passively mode-locked distributed Bragg reflector semiconductor laser
A compact semiconductor mode-locked laser (MLL) is presented that demonstrates strong passive Q-switched mode-locking over a wide range of drive conditions. The Q-switched frequency is tunable between 1 and 4 GHz for mode-locked pulses widths around 3.5 ps. The maximum ratio of peak to average power of the pulse-train is >120, greatly exceeding that of similarly sized passively MLLs
- …