A solid-state process for formation of boron nitride nanotubes

The formation of boron nitride (BN) nanotubes via a solid-state process is demonstrated. The nanotubes are produced by first ball-milling hexagonal BN powder to generate highly disordered or amorphous nanostructures, followed by annealing at temperatures up to 1300 °C. The annealing leads to the nucleation and growth of hexagonal BN nanotubes of both cylindrical and bamboo-like morphology. Unlike previous mechanisms for nanotube formation, the reordering and solid-state growth process of our nanotubes does not involve deposition from the vapor phase nor chemical reaction

Determination of Cross-Sectional Area of Focused Picosecond Gaussian Laser Beam

Measurement of the waist diameter of a focused Gaussian-beam at the 1/e(sup 2) intensity, also referred to as spot size, is key to determining the fluence in laser processing experiments. Spot size measurements are also helpful to calculate the threshold energy and threshold fluence of a given material. This work reports an application of a conventional method, by analyzing single laser ablated spots for different laser pulse energies, to determine the cross-sectional area of a focused Gaussian-beam, which has a nominal pulse width of approx. 10 ps. Polished tungsten was used as the target material, due to its low surface roughness and low ablation threshold, to measure the beam waist diameter. From the ablative spot measurements, the ablation threshold fluence of the tungsten substrate was also calculated

The Effects of Single-Wall Carbon Nanotubes on the Shear Piezoelectricity of Biopolymers

Shear piezoelectricity was investigated in a series of composites consisting of increased loadings of single-wall carbon nanotubes (SWCNTs) in poly (gamma-benzyl-L-glutamate), or PBLG. The effects of the SWCNTs on this material property in PBLG will be discussed. Their influence on the morphology of the polymer (degree of orientation and crystallinity), and electrical and dielectric properties of the composite will be reporte

Determination of Trace Silicone Contamination on Composites by Quantitative XPS and LIBS

Surface treatment and surface characterization techniques are critical to ensure that adherends are chemically activated and free of contaminants prior to adhesive bonding. Silicone contamination from mold-release agents and other sources can interfere with interfacial bonding, decreasing the durability and performance of bonded composite structures. Tools and methods are needed that can be used in a production environment to reliably detect low levels of contaminants in a rapid, simple, and cost-effective manner to improve bond reliability. In this work, surface characterization of carbon fiber reinforced polymer (CFRP) composites was performed using laser induced breakdown spectroscopy (LIBS) and the results were compared with those obtained from X-ray photoelectron spectroscopy (XPS). The objective was to investigate the ability to quantify the surface species measured by LIBS since it offers many advantages over XPS in terms of ease of use, sample preparation, and real-time results. The as-processed CFRP panels had trace surface silicone contamination from the fabrication process, the source of which was not investigated. The composites were laser treated at select average laser power levels, resulting in varying levels of contamination reduction. The Si atomic percentage measurements using XPS were conducted both before and after laser ablation. The XPS results were compared with those obtained from LIBS to assess the reliability of each technique for surface contaminant characterization. The results showed an excellent correlation in Si atomic concentration between the two techniques

Surface Characterization of Carbon Fiber Reinforced Polymers by Picosecond Laser Induced Breakdown Spectroscopy

Adhesive bonding of composite materials requires reliable monitoring and detection of surface contaminants as part of a vigorous quality control process to assure robust and durable bonded structures. Surface treatment and effective monitoring prior to bonding are essential in order to obtain a surface which is free from contaminants that may lead to inferior bond quality. In this study, the focus is to advance the laser induced breakdown spectroscopy (LIBS) technique by using pulse energies below 100 J (LIBS) for the detection of low levels of silicone contaminants in carbon fiber reinforced polymer (CFRP) composites. Various CFRP surface conditions were investigated by LIBS using 10 ps, 355 nm laser pulses with pulse energies below 30 J. Time-resolved analysis was conducted to optimize the gate delay and gate width for the detection of the C I emission line at 247.9 nm to monitor the epoxy resin matrix of CFRP composites and the Si I emission line at 288.2 nm for detection of silicone contaminants in CFRP. To study the surface sensitivity to silicone contamination, CFRP surfaces were coated with polydimethylsiloxane (PDMS), the active ingredient in many mold release agents. The presence of PDMS was studied by inspecting the Si I emission lines at 251.6 nm and 288.2 nm. The measured PDMS areal densities ranged from 0.15 to 2 g/cm(sup 2). LIBS measurements were performed before and after laser surface ablation. The results demonstrate the successful detection of PDMS thin layers on CFRP using picosecond LIBS

Laser ablation of energetic polymer solutions: effect of viscosity and fluence on the splashing behavior

Laser plasma thrusters are a new kind of propulsion system for small satellites, and work with the thrust created by the laser ablation of a target. Liquid polymer solutions are very promising fuels for such systems, provided that no splashing of the target occurs, because ejection of droplets strongly decreases the performances of the system. We have investigated the nanosecond infrared laser ablation of glycidyl azide polymer solutions containing carbon nanoparticles as absorber. Shadowgraphy imaging revealed two cases, namely splashing regime and solid-like behavior. The transition between both regimes depends on the viscosity of the solution and on the laser fluence, and is explained by the recoil force acting on the target. Appropriate conditions to avoid splashing were identified, showing that this liquid polymer solution is a suitable fuel for laser plasma thruster

Preparedness of the CTSA's Structural and Scientific Assets to Support the Mission of the National Center for Advancing Translational Sciences (NCATS)

The formation of the National Center for Advancing Translational Sciences (NCATS) brings new promise for moving basic and discoveries to clinical practice, ultimately improving the health of the nation. The CTSA sites, now housed with NCATS, are organized and prepared to support in this endeavor. The CTSAs provide a foundation for capitalizing on such promise through provision of a disease-agnostic infrastructure devoted to C&T science, maintenance of training programs designed for C&T investigators of the future, by incentivizing institutional reorganization and by cultivating institutional support

Social Planning And New Towns: The Case Of Columbia, Maryland.

PhDArea planning & developmentUrban planningUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/180636/2/7520345.pd