121 research outputs found
A vibration absorber for motorcycle handles
This paper describes the application of a vibration absorber to ameliorate the comfort of motorcycle handles. The concept of dynamical absorber is briefly summarised and a frequency response function is expressed as the ratio of vibration amplitudes (transmissibility).
Some practical hints on the tuning strategy are also suggested in order to correctly define the absorber and then achieve the most effective vibration reduction. A specifically designed item is presented, with the peculiar characteristic of taking advantage of the damping properties of viscoelastic material undergoing shear deformations. An experimental verification of the good performances of the absorber is eventually given on the basis of both a modal analysis of a motorbike and the testing of its handle on an electrodynamical shaker
Using Unbiased Autocorrelation to Enhance Kurtogram and Envelope Analysis Results for Rolling Element Bearing Diagnostics
Envelope analysis is one of the most advantageous methods for rolling element bearing diagnostics but finding the suitable frequency band for demodulation has been a substantial challenge for a long time. Introduction of spectral kurtosis (SK) mostly solved this problem but in situations where signal to noise ratio is very low or in presence of non-Gaussian noise this method will fail. This major drawback may noticeably decrease the effectiveness of the SK and goal of this paper is to overcome this problem. Vibration signals from rolling element bearings exhibit high levels of 2nd order cyclostationarity, especially in the presence of localised faults. A second-order cyclostationary signal is one whose autocovariance function is a periodic function of time: the proposed method, named Autogram by the authors, takes advantage of this property to enhance the conventional spectral kurtosis. First, a maximal overlap discrete wavelet packet transform (MODWPT) is adopted to split a signal in different frequency bands and central frequencies. Second, unbiased autocorrelation of the squared envelope is calculated to reduce the level of uncorrelated random noise. Third, kurtosis of the autocorrelation is computed and a two dimensional colormap, named Autogram, is presented in order to locate the optimal frequency band for demodulation. The purpose is to increase the detection and characterization of transients in the temporal signal, which contains the bearing defect frequencies as well as appropriate frequency at which the fault impulses are modulated. Finally, the Fourier transform is used to obtain a frequency domain representation of the envelope signal so to identify the defect frequencies of the bearing. The proposed method has been tested on experimental data and compared with literature results so to assess its performances in rolling element bearing diagnostics. The results are very positive, and bearing characteristic frequencies from signals masked by Gaussian and non-Gaussian background noise can be extracted
Big Data management: A Vibration Monitoring point of view
Vibration Monitoring is a particular kind of Condition Monitoring meant to infer the state of health of a machine from accelerometric measurements. From a practical point of view, the scope is then to extract from the acceleration data some valuable diagnostic information which could be used to detect the presence of possible damages (i.e., to produce knowledge about the state of health). When the monitoring is implemented online, in a continuous way, the raw accelerometric data sets can be very large and complex to be dealt with, as usually involve multiple channels (i.e., multiple locations and directions) and high sample rates (i.e., order of ksps - 103 samples per second), but the final knowledge about the state of health can, in principle, be summarized by a single binary information (i.e., healthy – 0 vs damaged – 1). This is commonly called Damage Detection. In this work, the big data management challenge is tackled from the point of view of statistical signal processing, so as to aggregate the multivariate data and condense them into single information of distance with respect to a healthy reference condition (i.e., the Novelty). When confounding influences (such as the work condition or the environmental condition) can be disregarded, the novelty information has a direct correspondence to the health information, so that an alarm indicating the detection of damage can be triggered upon exceeding a selected threshold for the limit novelty. Many different ways of solving such a binary classification problem can be found in the literature. Starting from the simplest, some of the more effective are compared in the present analysis, to finally select a reliable procedure for the big data management in vibration monitoring
ON THE USE OF PCA FOR DIAGNOSTICS VIA NOVELTY DETECTION: INTERPRETATION, PRACTICAL APPLICATION NOTES AND RECOMMENDATION FOR USE
The Principal Component Analysis (PCA) is the simplest eigenvector-based multivariate data analysis tool and dates back to 1901 when Karl Pearson proposed it as a way for finding the best fitting d-1 hyperplane of a system of points in a d-dimensional (Euclidean) space.
Over time, the PCA evolved in different fields with several different names and with different scopes, but, in its essence, it is always an orthogonal transformation to convert a set of observations of possibly correlated variables into a set of values of linearly uncorrelated variables called principal components.
Generalizing Pearson’s purpose, the knowledge derived by such an analysis is mostly used to find a subspace which effectively and efficiently summarizes the original system of points by losing a minimum amount of information.
In the field of Diagnostics, the fundamental task of detecting damage is basically a binary classification problem which is in many cases tackled via Novelty Detection: an observation is classified as novel if it differs significantly from other observations. Novelty can, in principle, be assessed directly in the original space, but the effectiveness of the estimated novelty can be improved by taking advantage of the PCA.
In this work, the traditional PCA will be compared to a robust modification that is commonly used in the field of diagnostics to face the issue of confounding influences which could affect the novelty-damage correspondence. Comparisons will be made to shed light on the main misleading aspects of PCA, and finally, define a unique, theoretically justified procedure for Diagnostics via Novelty Detection
Enhancing Vibration Reduction on Lightweight Lower Control Arm
This paper describes the design procedure to enhance the damping properties of a multimaterial lightweight suspension arm for a C-segment vehicle. An innovative viscoelastic material has been used to join carbon fiber with steel that has a function of passive constrained layer damper and adhesive simultaneously. Therefore, the hybrid technology applied has been focused on reducing the LCA mass, diminishing the steel thickness, and adding a CFRP tailored cover without compromising the global mechanical performance. Particular attention has been paid to the investigation of the dynamic response in terms of vibration reduction, especially in the range of structure-borne frequencies of 0–600 Hz. Two different viscoelastic materials have been evaluated in such a way to compare their stiffness, damping, and dynamic properties. The experimental test results have been virtually correlated with a commercial FEM code to create the respective material card and predict the real behavior of the LCAs (original and hybrid). The experimental modal analysis has been performed and compared on both the arms highlighting a very good correlation between virtual and experimental results. In particular, the hybrid LCA allows an interesting improvement of damping ratio, about 3,5 times higher for each eigenmode than in the original solution
From Novelty Detection to a Genetic Algorithm Optimized Classification for the Diagnosis of a SCADA-Equipped Complex Machine
In the field of Diagnostics, the fundamental task of detecting damage is basically a binary classification problem, which is addressed in many cases via Novelty Detection (ND): an observation is classified as novel if it differs significantly from reference, healthy data. ND is practically implemented summarizing a multivariate dataset with univariate distance information called Novelty Index. As many different approaches are possible to produce NIs, in this analysis, the possibility of implementing a simple classifier in a reduced-dimensionality space of NIs is studied. In addition to a simple decision-tree-like classification method, the process for obtaining the NIs can result as a dimension reduction method and, in turn, the NIs can be used for other classification algorithms. In addition, a case study will be analyzed thanks to the data published by the Prognostics and Health Management Europe (PHME) society, on the occasion of the Data Challenge 2021
Least squares smoothed k-nearest neighbors online prediction of the remaining useful life of a NASA turbofan
An accurate prediction of the Remaining Useful Life (RUL) of aircraft engines plays a fundamental role in the aerospace field since it is both mission and safety critical. In fact, a reliable estimate of the RUL can effectively reduce the maintenance costs while fostering safety. This paper proposes a
novel data-driven method to increase accuracy of the RUL prediction for real-time prognostic systems, considering multiple degradation mechanisms and making the model easy to implement. The proposed method exploits a novel modified k-Nearest Neighbors Interpolation (kNNI) with an
a posteriori Least Square Smoothing (LSS) automatically optimized to obtain the minimum prediction error. The LSS novel formulation was also generalized and proved to be equivalent to a Cumulative and Moving Average (CMA) mixture filter, which can be easily implemented online.
The method was developed and validated based on a new NASA dataset generated by the dynamic model Commercial Modular Aero-Propulsion System Simulation (N-CMAPSS) with run-to-failure data related to a small fleet of aircraft engines under realistic flight conditions. Finally, a refer-
ence kNN-based method already known in the literature was compared to the novel proposed one to demonstrate the goodness of the results and the performance improvements
Performance of Envelope Demodulation for Bearing Damage Detection on {CWRU} Accelerometric Data: Kurtogram and Traditional Indicators vs. Targeted a Posteriori Band Indicators
Envelope demodulation of vibration signals is surely one of the most successful methods
of analysis for highlighting diagnostic information of rolling element bearings incipient faults. From
a mathematical perspective, the selection of a proper demodulation band can be regarded as an
optimization problem involving a utility function to assess the demodulation performance in a
particular band and a scheme to move within the search space of all the possible frequency bands
{f, Df} (center frequency and band size) towards the optimal one. In most of cases, kurtosis-based
indices are used to select the proper demodulation band. Nevertheless, to overcome the lack of
robustness to non-Gaussian noise, different utility functions can be found in the literature. One of
these is the kurtosis of the unbiased autocorrelation of the squared envelope of the filtered signal
found in the autogram. These heuristics are usually sufficient to highlight the defect spectral lines
in the demodulated signal spectrum (i.e., usually the squared envelope spectrum (SES)), enabling
bearings diagnostics. Nevertheless, it is not always the case. In this work, then, posteriori band
indicators based on SES defect spectral lines are proposed to assess the general envelope demodulation
performance and the goodness of traditional indicators. The CaseWestern Reserve University
bearing dataset is used as a test case
ANOVA and other statistical tools for bearing damage detection
The aim of the paper is to exhaustively exploit and test some statistical tools, such as ANOVA and Linear Discriminant Analysis, to investigate a massive amounts of data collected over a rig available @DIRG Lab, specifically conceived to test high speed aeronautical bearings; the rig permits the control of rotational speed (6000 – 30000 RPM), radial load (0 to 1800 N) and temperature, and allows monitoring vibrations by means of 4 tri-axial accelerometers.
Fifteen different damages have been realised on the bearing but, for simplicity, this papers only treats those cases where simple identification methods have failed or not demonstrated to be fully affordable. The damages have been inferred on rolls or on the internal ring, with different severities, which are reported as a function of their extension, i.e. 150, 250, 450 ÎĽm. A total number of 17 combinations of load and speed have been analysed per each damaged bearing.
Although ANOVA rigorously applies when some conditions are respected on the probability distribution of the responses, such as Independence of observations, Normality (normal distribution of the residuals) and Homoscedasticity (homogeneity of variances – equal variances), the paper exploits the robustness of the technique even when data do not fully fall into the requisites.
Analyses are focused on the best features to be taken into account, trying to seek for the most informative, but also trying to extract a “best choice” for the acceleration direction and the most informative point to be monitored over the simple structure.
Wanting to focus on the classification of the single observation, Linear Discriminant Analysis has been tested, demonstrating to be quite effective as the number of misclassification is not very high, (at least considering the widest damages).
All these classifications have unfortunately the limit of requiring labelled examples. Acquisitions in un- damaged and damaged conditions are in fact essential to guarantee their applicability, which is quite often impossible for real industrial plants.
The target can be anyway reached by adopting distances from un-damaged conditions which, conversely, must be known as a reference. Advantages of the statistical methods are quickness, simplicity and full independence from human interaction
Uncertainty of impedance tube sound absorption measurements of a spiral-tube-shaped 3-D printed acoustic metamaterial
- …