Rekonstruktion der Absenkungsgeschichte des Argentinischen Kontinentalrands

Sedimentary basins represent geological archives. Accordingly, 3D basin models that integrate geological and geophysical observations can be used to reproduce not only their present-day structural configuration and distribution of physical properties, but also their evolution including the subsidence history. For example, the thickness of deposited sediments reflects the amount of subsidence caused by the sediment load. The corresponding load-dependent vertical movements (called isostatic subsidence) can be sequentially subtracted from the total subsidence in order to reconstruct past depth configurations. Another aspect of basin subsidence is caused by thermal processes that can also be approximated by studying the present-day basin configuration. If the basin formation is related to lithospheric stretching and thinning, it initially involves a thermal disturbance due to which the geothermal gradient is increased by an amount depending on the observed strain. After stretching has ceased, the lithosphere starts cooling down and approaches a thermal equilibrium. This cooling process is accompanied by an increase in rock density and related thermal subsidence, which can also be assessed. By calculating the two subsidence components for certain stratigraphic intervals, the corresponding temporal changes in water depths (paleobathymetries) can be reconstructed for our understanding of subsidence dynamics. This research methodology was applied to the conjugate passive continental margins of Africa and Argentina in order to analyse and compare the evolution of sedimentary basins after the formation of the South Atlantic. This study mainly focussed on the Argentinian Colorado Basin because of its complex evolution and economic resource potential

Effekte des CO₂-Grenzausgleichsmechanismus (CBAM) auf Wirtschaft und Beschäftigung in Deutschland

Das wissenschaftlich unabhängige Projekt "Qualifikation und Beruf in der Zukunft" (QuBe-Projekt) erstellt seit 2018 das Fachkräftemonitoring für das BMAS. Dieses besteht aus einer jährlichen Mittelfristprognose und einer Langfristprojektion, die alle zwei Jahre erfolgt. Zudem werden alle zwei Jahre Szenarienrechnungen durchgeführt. Diese behandelten im Jahr 2023 unter anderem die Effekte des CO2-Grenzausgleichssystems der Europäischen Union (CBAM) auf Wirtschaft und Beschäftigung in Deutschland. Für Deutschland ergibt sich infolge von CBAM bis zum Jahr 2040 ein um 0,17 Prozent niedrigeres preisbereinigtes Bruttoinlandsprodukt (BIP) im Vergleich zu einer Welt ohne die Annahmen im CBAM-Szenario. Für das niedrigere BIP-Niveau verantwortlich zeigen sich insbesondere der Außenbeitrag, also die niedrigeren Exporte, und die durch das höhere Preisniveau niedrigere private Nachfrage. Langfristig werden die Exporte Deutschlands und der anderen europäischen Länder im CBAM-Szenario weniger stark ansteigen. Deutschland ist dabei mit einem niedrigeren Exportniveau von 0,6 Prozent im Jahr 2040 gegenüber dem Referenzszenario im Vergleich zu anderen großen EU-Ländern wie Frankreich, Italien oder Spanien in relativen Größen am wenigsten betroffen

Subsidence evolution of the conjugate passive continental margins of southwestern Africa and eastern Argentina

Even though the present-day structure of the South Atlantic passive continental margins has been thoroughly investigated, uncertainties remain, particularly regarding the subsidence evolution during the post-rift phase and its causative processes. This thesis therefore focuses on the subsidence history of the passive continental margins within the Southern Segment of the South Atlantic Ocean. The subsidence history is inferred from restored paleobathymetries along the passive margins using their present-day structural configuration as well as their thermal field.In a first part of this thesis a 1D backward modelling approach is used to reconstruct the paleobathymetries offshore SW Africa. Therefore, individual subsidence components are separated according to the load induced by the sediments and the thermal cooling of the lithosphere. Starting from the present-day configuration, sedimentary units are successively “backstripped” to quantify the amount of load induced subsidence. The amount of thermal subsidence is calculated assuming uniform stretching of the lithosphere. Considering both subsidence components allows reconstructing paleobathymetries of the SW African margin in order to infer its subsidence history. The results obtained show a general subsidence of the margin with intermittent phases of seafloor uplift, as indicated by elevations above sea level in some parts of the research area. Summing up, the amount of elevations above sea level (i.e., seafloor uplift) during the post-rift phase yields about 1200 m. Although this quantification cannot fully identify the causative processes behind the vertical movements, their timing and magnitude give evidence for a mantle mechanism causing seafloor uplift rather than ridge-push related to spreading of the South Atlantic Ocean.Improving the understanding of the subsidence evolution of the South Atlantic passive margins requires also a subsidence analysis along the conjugate margin offshore SE South America. Hence the Colorado Basin along the Argentine margin is investigated. To accomplish this, the present-day structural configuration of the Colorado Basin is used and the same subsidence analysis used to analyse the SW African margin is applied. The results of the backward modelling approach show continuous subsidence of the Colorado Basin since the breakup of Gondwana. Therefore, they are in contrast with the subsidence history of the sedimentary basin on the conjugate margin, where the general subsidence pattern was interrupted by multiple phases of seafloor uplift. In terms of causative processes responsible for the subsidence history, a tectonic force alone, such as ridge-push due to seafloor spreading, is unlikely to cause the seafloor uplift along the SW African margin, since the effects of ridge-push should have the same impact on both margins. This further supports the hypothesis of a mantle mechanism rather than ridge-push as cause for the seafloor uplift along the SW African margin.Finally, to assess how far the obtained seafloor uplift is influenced by the assumptions of the 1D backward modelling and in order to also take the initial syn-rift subsidence into account, 3D forward modelling is performed for the same research area along the SW African margin as in the first part of this work. The 3D forward modelling approach used in this study has the particular advantage of coupling the thermal and mechanical subsidence components. Hence, the interaction between thermal relaxation of the lithosphere and the flexural isostatic response due to sedimentary loading, as well as the interplay of both is considered. The results also indicate elevations above sea level with a similar magnitude, as shown in the backward modelling approach and only minor temporal variations. Following the interpretation of the forward modelling results, it appears that the elevations above sea level are strongly related to the syn-rift phase. Taking the limitations of the approach used to reconstruct the syn-rift phase into account leads to the conclusion that the elevation above sea level might be the result of missing subsidence during the syn-rift phase. This missing subsidence component might be related to unconsidered lower crustal flow while calculating the syn-rift subsidence. According to the previously described approaches, a successful analysis of the subsidence history of the South Atlantic passive continental margins based on present-day observations is possible. After summarizing the results of the three parts of this work and integrating them into a comprehensive discussion of the possible causative processes behind the evolution of the South Atlantic passive continental margins, it is evident that a mantle mechanism affected the SW African margin causing phases of uplift

Paraffin wax as self-sealing insulation material of seasonal sensible heat storage systems-A laboratory study.

Seasonal heat storage is considered as one of the key elements on the path to a low-emission economy. Embedded in local district heating networks, they raise the share of renewable energies and balance out highly fluctuating supplies of e.g. solar systems or windmills. The technology of seasonal heat storage can be described as almost technically mature, with well-established concepts and some systems being in operation for a considerable time. Nevertheless, the operating experience gained to date also revealed two critical problems. On the one hand, even smallest leakages in sealing foils led to irreparable breakdowns. On the other hand, heat loss in the marginal areas was revealed as a key deficiency, preventing the technology from advancing towards global marketability. This study presents an experimental approach to address these two key issues in the field of seasonal energy storage. Two small-scale laboratory tests were carried out to test paraffin wax as a completely novel component in the marginal area of seasonal storages. This is based on two material properties: As hydrophobic and mobile medium, the warmed and molten paraffin should actively seal the fissures and holes in the event of leakage. Additionally, the latent heat storage properties of the paraffin wax should increase the systems' total storage capacity and reduce lateral heat losses via its low thermal conductivity. With retardation periods from 2.5 to 4 hours, the results show an effective phase change effect of the paraffin wax, which reduces energy losses and allows to buffer short-term, intensive loading and unloading processes. By storing up to 138 kJ/kg energy in the paraffin wax, increased capacities of application-scale pit storages by up to 40.70 MWh are to be expected. Additionally, the self-healing features could be successfully demonstrated: With only small losses of between 1.5 and 17%, the paraffin wax effectively sealed artificially incised leaks. Thereby, the mechanism was most effective for local defects. Following these positive demonstrations of feasibility, technical design questions still remain, which concern prevention of deformation of the paraffin wax. Once solved, this new component can then provide a path for further optimization of seasonal heat storage technologies