Field-dependent Behavior of AC Susceptibility in [Y<inf>0.8</inf>Ca<inf>0.2</inf>](Ba<inf>0.5</inf>Sr<inf>0.5</inf>)<inf>2</inf>Cu<inf>3</inf>O<inf>7−δ</inf>

The AC susceptibility of [Y0.8Ca0.2](Ba0.5Sr0.5)2 Cu3O7−δ was investigated as a function of frequency and amplitude of AC magnetic field. The susceptibilities of the sample display the field amplitude dependence. The peak temperature (Tp) of its imaginary part shows not frequency dependence but field amplitude dependence. The frequency effect on AC susceptibility was negligible. As the field amplitude increases, Tp shifts to lower temperature. This effect can be interpreted in terms of bulk pinning hysteresis loss due to the vortices motion in/out grain boundary.The work in Peru has been supported by the Superior Council of Research of the National University of San Marcos (Grant No. 151301031). This work was also supported by the National Research Foundation of President Post-doctoral fellowship Program (NRF-2013R1A6A3A060443). “L. De Los Santos thanks the Ministry of the Production “Programa Nacional de Innovacion´ para la Competitividad y Productividad” for financial support (Project ECIP-1-P-069-14)”.This is the author accepted manuscript. The final version is available from Springer via http://dx.doi.org/10.1007/s10948-015-3238-

Two-year clinical outcome from the Iberian registry patients after left atrial appendage closure

AIMS: The aim of this study was to observe the percentage of thromboembolic and haemorrhagic events over a 2-year follow-up in patients with non-valvular atrial fibrillation (NVAF) undergoing closure of the left atrial appendage (LAA) with an occlusion device. Observed events and CHADS2 (congestive heart failure, hypertension, age, diabetes, stroke history), CHA2DS2-VASc (also adding: vascular disease and sex) and HAS-BLED (hypertension, abnormal liver/renal function, stroke history, bleeding predisposition, labile international normalised ratios, elderly, drugs/alcohol use)-predicted events were compared. METHODS: LAA closure with an occlusion device was performed in 167 NVAF patients contraindicated for oral anticoagulants and recruited from 12 hospitals between 2009 and 2013. At least two transoesophageal echocardiograms were performed in the first 6 months postimplantation. Antithrombotics included clopidogrel and aspirin. Patients were monitored for death, stroke, major and relevant bleeding and hospitalisation for concomitant conditions. Mean age was 74.68±8.58, median follow-up was 24 months, 5.38% had intraoperative complications and implantation was successful in 94.6% of subjects. Mortality during follow-up was 10.8%, mostly (9.5%) non-cardiac related. Bleeding occurred in 10.1% of subjects, 5.7% major and 4.4% minor though relevant, and 4.4% suffered stroke. Major bleeding and stroke/transient ischaemic attack events within 2 years (annual event rates, 290 patients/year) were less frequent than expected from CHADS2 (2.4% vs 9.6%), CHA2DS2-VASc (2.4% vs 8.3%) and HAS-BLED (3.1% vs 6.6%) risk scores (p<0.001, p=0.003, p=0.047, respectively). CONCLUSIONS: LAA closure with an occlusion device in patients contraindicated for oral anticoagulants is a therapeutic option associated with fewer thromboembolic and haemorrhagic events than expected from risk scores, particularly in the second year postimplantation

Carbothermal reduction of mill scales formed on steel billets during continuous casting

AbstractA billet is a bar made from crude steel which surface contains scales which are rich in iron oxides. This study presents the carbothermal reduction of the scales formed in steel billets. The process included the reaction of the iron oxides contents with carbon (in ratio 5:1) and annealing in a tubular furnace under argon atmosphere. The occurred reactions are discussed using thermodynamic calculations and thermal analysis which indicate a three-stage reduction process Fe3O4 ➔ FeO ➔ Fe3C ➔α-Fe with intermediate reactions at the interval temperature 960 and 1300 °C. The X-ray diffraction confirms the reduction to α-Fe with minor presence of unreacted C, magnetite and wustite. Mössbauer spectroscopy analysis was performed at room temperature where a typical sextet corresponding to the dominant α-Fe is shown as well as wustite, magnetite and cementite to a lesser extent. The magnetization measurements confirm the ferromagnetic state corresponding to the α-Fe.</jats:p

Plated Cambrian Bilaterians Reveal the Earliest Stages of Echinoderm Evolution

Echinoderms are unique in being pentaradiate, having diverged from the ancestral bilaterian body plan more radically than any other animal phylum. This transformation arises during ontogeny, as echinoderm larvae are initially bilateral, then pass through an asymmetric phase, before giving rise to the pentaradiate adult. Many fossil echinoderms are radial and a few are asymmetric, but until now none have been described that show the original bilaterian stage in echinoderm evolution. Here we report new fossils from the early middle Cambrian of southern Europe that are the first echinoderms with a fully bilaterian body plan as adults. Morphologically they are intermediate between two of the most basal classes, the Ctenocystoidea and Cincta. This provides a root for all echinoderms and confirms that the earliest members were deposit feeders not suspension feeders

Protección de la Heparina a las células B- pancreáticas frente a radicales libres de Oxígeno.

La diabetes autoinmune tipo 1 se caracteriza por la invasión de células mononucleares en los islotes pancreáticos, destruyendo así las células beta productoras de insulina. Se ha visto que in vivo la destrucción autoinmune de los islotes se asocia con la producción de heparanasa, la cual degrada heparán sulfato (molécula imprescindible para la supervivencia de los islotes) y se permite la entrada de las células inmunitarias que atacarán los islotes beta pancreáticos. Se han obtenido resultados mediante la adición de concentraciones conocidas de heparina, la cual confiere una protección extra frente a radicales libres de oxígeno y como consecuencia hay una disminución de la mortalidad celular.A través de tres líneas celulares distintas se ha llevado a cabo el experimento. Primeramente con Rinm5F productora de insulina y somatostatina, con células Ins capaces de responder al estímulo de glucosa produciendo y secretando insulina y finalmente con fibroblastos. El experimento se basa en dejar crecer las cepas celulares en un número determinado de flacs según el tratamiento. Se añade heparina a una concentración conocida y establecida anteriormente y al día siguiente con una concentración exacta de agua oxigenada (aporta los radicales libres de oxígeno) se la añadimos al cultivo. Recogemos las células y gracias al ioduro de propidio con concentración 1 mg/ml marcamos las células muertas para así poder comprobar el porcentaje de supervivencia celular que le ha conferido la heparina a cada línea celular. Procedemos a realizar el contaje con el citómetro que indica el % de muerte celular, ya que el ioduro de propidio es un agente intercalante que se une a los ácidos nucleicos. Esta molécula fluorescente se utiliza para evaluar la viabilidad celular o el contenido de ADN en las células. Se puede utilizar para diferenciar células necróticas, apoptóticas o vivas.Los resultados obtenidos con las líneas celulares Rinm5F y las Ins nos muestran que a bajas concentraciones de agua oxigenada y con heparina, efectivamente hay protección ya que la muerte celular se reduce de un 10 a un 15%. En cambio con los fibroblastos no vemos protección a ninguna de las concentraciones establecidas, resultado que ya esperábamos en nuestra hipótesis inicial. Estos resultados sólo son el inicio de un largo estudio, ya que  primero se ajustan las concentraciones a trabajar con radicales libres de oxígeno, pero en un  futuro el estudio se realizará también con radicales de nitrógeno

Carbothermal reduction of mill scales formed on steel billets during continuous casting

AbstractA billet is a bar made from crude steel which surface contains scales which are rich in iron oxides. This study presents the carbothermal reduction of the scales formed in steel billets. The process included the reaction of the iron oxides contents with carbon (in ratio 5:1) and annealing in a tubular furnace under argon atmosphere. The occurred reactions are discussed using thermodynamic calculations and thermal analysis which indicate a three-stage reduction process Fe3O4 ➔ FeO ➔ Fe3C ➔α-Fe with intermediate reactions at the interval temperature 960 and 1300 °C. The X-ray diffraction confirms the reduction to α-Fe with minor presence of unreacted C, magnetite and wustite. Mössbauer spectroscopy analysis was performed at room temperature where a typical sextet corresponding to the dominant α-Fe is shown as well as wustite, magnetite and cementite to a lesser extent. The magnetization measurements confirm the ferromagnetic state corresponding to the α-Fe.</jats:p

Enhancement of lipase activity in non-aqueous media upon immobilization on multi-walled carbon nanotubes

<p>Abstract</p> <p>Background</p> <p>Immobilization of biologically active proteins on nanosized surfaces is a key process in bionanofabrication. Carbon nanotubes with their high surface areas, as well as useful electronic, thermal and mechanical properties, constitute important building blocks in the fabrication of novel functional materials.</p> <p>Results</p> <p>Lipases from <it>Candida rugosa </it>(CRL) were found to be adsorbed on the multiwalled carbon nanotubes with very high retention of their biological activity (97%). The immobilized biocatalyst showed 2.2- and 14-fold increases in the initial rates of transesterification activity in nearly anhydrous hexane and water immiscible ionic liquid [Bmim] [PF6] respectively, as compared to the lyophilized powdered enzyme. It is presumed that the interaction with the hydrophobic surface of the nanotubes resulted in conformational changes leading to the 'open lid' structure of CRL. The immobilized enzyme was found to give 64% conversion over 24 h (as opposed to 14% with free enzyme) in the formation of butylbutyrate in nearly anhydrous hexane. Similarly, with ionic liquid [Bmim] [PF6], the immobilized enzyme allowed 71% conversion as compared to 16% with the free enzyme. The immobilized lipase also showed high enantioselectivity as determined by kinetic resolution of (±) 1-phenylethanol in [Bmim] [PF6]. While free CRL gave only 5% conversion after 36 h, the immobilized enzyme resulted in 37% conversion with > 99% enantiomeric excess. TEM studies on the immobilized biocatalyst showed that the enzyme is attached to the multiwalled nanotubes.</p> <p>Conclusion</p> <p>Successful immobilization of enzymes on nanosized carriers could pave the way for reduced reactor volumes required for biotransformations, as well as having a use in the construction of miniaturized biosensensor devices.</p

Ductility of wide-beam RC frames as lateral resisting system

[EN] Some Mediterranean seismic codes consider wide-beam reinforced concrete moment resisting frames (WBF) as horizontal load carrying systems that cannot guarantee high ductility performances. Conversely, Eurocode 8 allows High Ductility Class (DCH) design for such structural systems. Code prescriptions related to WBF are systematically investigated. In particular, lesson learnt for previous earthquakes, historical reasons, and experimental and numerical studies underpinning specific prescriptions on wide beams in worldwide seismic codes are discussed. Local and global ductility of WBF are then analytically investigated through (1) a parametric study on chord rotations of wide beams with respect to that of deep beams, and (2) a spectral-based comparison of WBF with conventional reinforced concrete moment resisting frames (i.e. with deep beams). Results show that the set of prescriptions given by modern seismic codes provides sufficient ductility to WBF designed in DCH. In fact, global capacity of WBF relies more on the lateral stiffness of the frames and on the overstrength of columns rather than on the local ductility of wide beams, which is systematically lower with respect to that of deep beams.Gómez-Martínez, F.; Alonso Durá, A.; De Luca, F.; Verderame, GM. (2016). Ductility of wide-beam RC frames as lateral resisting system. Bulletin of Earthquake Engineering. 14(6):1545-1569. doi:10.1007/s10518-016-9891-xS15451569146ACI (1989) Building code requirements for reinforced concrete (ACI 318-89). ACI Committee 318, American Concrete Institute, Farmington Hills, Michigan, USAACI (2008) Building code requirements for structural concrete (ACI 318-08) and commentary (318-08). ACI Committee 318, American Concrete Institute, Farmington Hills, Michigan, USAACI-ASCE (1991) Recommendations for design of beam-column connections in monolithic reinforced concrete structures (ACI 352R-91). Joint ACI-ASCE Committee 352, American Concrete Institute, Farmington Hills, Michigan, USAACI-ASCE (2002) Recommendations for design of beam-column connections in monolithic reinforced concrete structures (ACI 352R-02). Joint ACI-ASCE Committee 352, American Concrete Institute, Farmington Hills, Michigan, USAArslan MH, Korkmaz HH (2007) What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey? Eng Fail Anal 14(1):1–22ASCE (2007) Seismic Rehabilitation of Existing Buildings, ASCE/SEI 41-06. American Society of Civil Engineers, RestonASCE (2010) Minimum Design Loads for Building and Other Structures, ASCE/SEI 7-10. American Society of Civil Engineers, RestonBenavent-Climent A (2007) Seismic behavior of RC side beam-column connections under dynamic loading. J Earthquake Eng 11:493–511Benavent-Climent A, Zahran R (2010) An energy-based procedure for the assessment of seismic capacity of existing frames: application to RC wide beam systems in Spain. Soil Dyn Earthq Eng 30:354–367Benavent-Climent A, Cahís X, Zahran R (2009) Exterior wide beam-column connections in existing RC frames subjected to lateral earthquake loads. Eng Struct 31:1414–1424Benavent-Climent A, Cahís X, Vico JM (2010) Interior wide beam-column connections in existing RC frames subjected to lateral earthquake loading. Bull Earthq Eng 8:401–420BHRC (2004) Iranian Code of Practice for Seismic Resistant Design of Buildings. Standard Nº 2800, 3rd edn. Building and Housing Research Center, TehranBorzi B, Elnashai AS (2000) Refined force reduction factors for seismic design. Eng Struct 22:1244–1260Borzi B, Pinho R, Crowley H (2008) Simplified pushover-based vulnerability analysis for large-scale assessment of RC buildings. Eng Struct 30:804–820BSI (2004) Eurocode 2: Design of concrete structures: Part 1-1: General rules and rules for buildings. British Standards Institutions, LondonCalvi GM (1999) A displacement-based approach for vulnerability evaluation of classes of buildings. J Earthquake Eng 3(3):411–438CDSC (1994) Seismic construction code, NCSR-94. Committee for the Development of Seismic Codes, Spanish Ministry of Construction, Madrid, Spain (in Spanish)CDSC (2002) Seismic construction code, NCSE-02. Committee for the Development of Seismic Codes, Spanish Ministry of Construction, Madrid, Spain (in Spanish)CEN (2004) Eurocode 8: design of structures for earthquake resistance—part 1: general rules, seismic actions and rules for buildings. European Standard EN 1998-1:2003—Comité Européen de Normalisation, Brussels, BelgiumCEN (2005) Eurocode 8: design of structures for earthquake resistance—part 3: assessment and retrofitting of buildings. European Standard EN 1998-1:2005—Comité Européen de Normalisation, Brussels, BelgiumCheung PC, Paulay T, Park R (1991) Mechanisms of slab contributions in beam-column subassemblages. ACI Spec Publ 123Cosenza E, Manfredi G, Polese M, Verderame GM (2005) A multilevel approach to the capacity assessment of existing RC buildings. J Earthquake Eng 9(1):1–22Crowley H, Pinho R (2010) Revisiting Eurocode 8 formulae for periods of vibration and their employment in linear seismic analysis. Earthquake Eng Struct Dynam 39:223–235CS.LL.PP (2009) Instructions for the application of the technique code for the Constructions. Official Gazette of the Italian Republic, 47, Regular Supplement no. 27 (in Italian)De Luca F, Vamvatsikos D, Iervolino I (2013) Near-optimal piecewise linear fits of static pushover capacity curves for equivalent SDOF analysis. Earthquake Eng Struct Dynam 42(4):523–543De Luca F, Verderame GM, Gómez-Martínez F, Pérez-García A (2014) The structural role played by masonry infills on RC building performances after the 2011 Lorca, Spain, earthquake. Bull Earthq Eng 12(5):1999–2026Decanini LD, Mollaioli F (2000) Analisi di vulnerabilità sismica di edifici in cemento armato pre-normativa. In: Cosenza E (ed) Comportamento sismico di edifici in cemento armato progettati per carichi verticali. CNR—Gruppo Nazionale per la Difesa dei Terremoti, Rome (in Italian)Dolšek M, Fajfar P (2004) IN2—a simple alternative for IDA. In: Proceedings of the 13th World conference on Earthquake Engineering. August 1–6, Vancouver, Canada. Paper 3353Domínguez D, López-Almansa F, Benavent-Climent A (2014) Comportamiento para el terremoto de Lorca de 11-05-2011, de edificios de vigas planas proyectados sin tener en cuenta la acción sísmica. Informes de la Construcción 66(533):e008 (in Spanish)Domínguez D, López-Almansa F, Benavent-Climent A (2016) Would RC wide-beam buildings in Spain have survived Lorca earthquake (11-05-2011)? Eng Struct 108:134–154Dönmez C (2013) Seismic Performance of Wide-Beam Infill-Joist Block RC Frames in Turkey. J Perform Constr Facil 29(1):04014026Fadwa I, Ali TA, Nazih E, Sara M (2014) Reinforced concrete wide and conventional beam-column connections subjected to lateral load. Eng Struct 76:34–48Fardis MN (2009) Seismic design, assessment and retrofitting of concrete, Buildings edn. Springer, LondonGentry TR, Wight JK (1992) Reinforced concrete wide beam-column connections under earthquake-type loading. Report no. UMCEE 92-12. Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, Michigan, USAGómez-Martínez F (2015) FAST simplified vulnerability approach for seismic assessment of infilled RC MRF buildings and its application to the 2011 Lorca (Spain) earthquake. Ph.D. Thesis, Polytechnic University of Valencia, SpainGómez-Martínez F, Pérez García A, De Luca F, Verderame GM (2015a) Comportamiento de los edificios de HA con tabiquería durante el sismo de Lorca de 2011: aplicación del método FAST. Informes de la Construcción 67(537):e065 (in Spanish)Gómez-Martínez F, Pérez-García A, Alonso Durá A, Martínez Boquera A, Verderame GM (2015b) Eficacia de la norma NCSE-02 a la luz de los daños e intervenciones tras el sismo de Lorca de 2011. In: Proceedings of Congreso Internacional sobre Intervención en Obras Arquitectónicas tras Sismo: L’Aquila (2009), Lorca (2011) y Emilia Romagna (2012), May 13–14, Murcia, Spain (in Spanish)Gómez-Martínez F, Verderame GM, De Luca F, Pérez-García A, Alonso-Durá, A (2015c). High ductility seismic performances of wide-beam RC frames. In; XVI Convegno ANIDIS. September 13–17, L'Aquila, ItalyHawkins NM, Mitchell D (1979) Progressive collapse of flat plate structures. ACI J 76(7):775–808Iervolino I, Manfredi G, Polese M, Verderame GM, Fabbrocino G (2007) Seismic risk of RC building classes. Eng Struct 29(5):813–820Inel M, Ozmen HB, Akyol E (2013) Observations on the building damages after 19 May 2011 Simav (Turkey) earthquake. Bull Earthq Eng 11(1):255–283Kurose Y, Guimaraes GN, Zuhua L, Kreger ME, Jirsa JO (1991) Evaluation of slab-beam-column connections subjected to bidirectional loading. ACI Spec Publ 123:39–67LaFave JM, Wight JK (1997) Behavior of reinforced exterior wide beam-column-slab connections subjected to lateral earthquake loading. Report no. UMCEE 97-01. Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, Michigan, USALaFave JM, Wight JK (1999) Reinforced concrete exterior wide beam-column-slab connections subjected to lateral earthquake loading. ACI Struct J 96(4):577–586LaFave JM, Wight JK (2001) Reinforced concrete wide-beam construction vs. conventional construction: resistance to lateral earthquake loads. Earthq Spectra 17(3):479–505Li B, Kulkarni SA (2010) Seismic behavior of reinforced concrete exterior wide beam-column joints. J Struct Eng (ASCE) 136(1):26–36López-Almansa F, Domínguez D, Benavent-Climent A (2013) Vulnerability analysis of RC buildings with wide beams located in moderate seismicity regions. Eng Struct 46:687–702Masi A, Santarsiero G, Nigro D (2013a) Cyclic tests on external RC beam-column joints: role of seismic design level and axial load value on the ultimate capacity. J Earthquake Eng 17(1):110–136Masi A, Santarsiero G, Mossucca A, Nigro D (2013b) Seismic behaviour of RC beam-column subassemblages with flat beam. In: Proceedings of XV Convegno della Associazione Nazionale Italiana di Ingegneria Sismica, ANIDIS. Padova, ItalyMazzolani FM, Piluso V (1997) Plastic design of seismic resistant steel frames. Earthquake Eng Struct Dynam 26:167–191MEPP (2000a) Greek earthquake resistant design code, EAK 2000. Ministry of Environment, Planning and Public Works, AthensMEPP (2000b) Greek code for the design and construction of concrete works, EKOS 2000. Ministry of Environment, Planning and Public Works, Athens (in Greek)Miranda E, Bertero VV (1994) Evaluation of strength reduction factors for earthquake-resistant design. Earthq Spectra 10(2):357–379MPWS (2007) Specifications for buildings to be built in seismic areas. Turkish Standards Institution, Ministry of Public Works and Settlement, Ankara (in Turkish)Mwafy AM, Elnashai AS (2002) Calibration of force reduction factors of RC buildings. J Earthquake Eng 6(2):239–273NZS (2004) Structural design actions. Part 5: earthquake actions, NZS 1170.5. New Zealand Standards, WellingtonNZS (2006) Concrete structures standard: part 1—the design of concrete structures, NZS 3101 part 1. New Zealand Standards, WellingtonPan A, Moehle JP (1989) Lateral displacement ductility of reinforced concrete flat plates. ACI Struct J 86(3):250–258Panagiotakos TB, Fardis MN (2001) Deformations of reinforced concrete members at yielding and ultimate. ACI Struct J 98(2):135–148 [and Appendix 1 (69 pp)]Paulay T, Priestley MJN (1992) Seismic design of concrete and masonry structures. Wiley, New York, USAQuintero-Febres CG, Wight JK (1997) Investigation on the seismic behavior of RC interior wide beam-column connections. Report no. UMCEE 97-15. Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, Michigan, USAQuintero-Febres CG, Wight JK (2001) Experimental study of Reinforced concrete interior wide beam-column connections subjected to lateral loading. ACI Struct J 98(4):572–582Serna-Ros P, Fernández-Prada MA, Miguel-Sosa P, Debb OAR (2001) Influence of stirrup distribution and support width on the shear strength of reinforced concrete wide beams. Mag Concr Res 54(00):1–11Shuraim AB (2012) Transverse stirrup configurations in RC wide shallow beams supported on narrow columns. J Struct Eng 138(3):416–424Siah WL, Stehle JS, Mendis P, Goldsworthy H (2003) Interior wide beam connections subjected to lateral earthquake loading. Eng Struct 25:281–291Tore E, Demiral T (2014) A parametric study of code-based performance limits for wide beams. e-GFOS 5(8):1–11Vamvatsikos D, Cornell CA (2002) Incremental Dynamic Analysis. Earthquake Eng Struct Dynam 31:491–514Vidic T, Fajfar P, Fischinger M (1994) Consistent inelastic design spectra: strength and displacement. Earthquake Eng Struct Dynam 23:507–521Vielma JC, Barbat AH, Oller S (2010) Seismic safety of low ductility structures used in Spain. Bull Earthq Eng 8:135–15

Optimization of lipase production by solid-state fermentation of olive pomace: from flask to laboratory-scale packed-bed bioreactor

Lipases are versatile catalysts with many applications and can be produced by solid-state fermentation (SSF) using agro-industrial wastes. The aim of this work was to maximize the production of Aspergillus ibericus lipase under SSF of olive pomace (OP) and wheat bran (WB), evaluating the effect on lipase production of C/N ratio, lipids, phenols, content of sugars of substrates and nitrogen source addition. Moreover, the implementation of the SSF process in a packed-bed bioreactor and the improvement of lipase extraction conditions were assessed. Low C/N ratios and high content of lipids led to maximum lipase production. Optimum SSF conditions were achieved with a C/N mass ratio of 25.2 and 10.2% (w/w) lipids in substrate, by the mixture of OP:WB (1:1) and supplemented with 1.33% (w/w) (NH4)2SO4. Studies in a packed-bed bioreactor showed that the lower aeration rates tested prevented substrate dehydration, improving lipase production. In this work, the important role of Triton X-100 on lipase extraction from the fermented solid substrate has been shown. A final lipase activity of 223 ± 5 U g1 (dry basis) was obtained after 7 days of fermentation.Felisbela Oliveira acknowledges the financial support from Fundação para a Ciência e Tecnologia (FCT) of Portugal through grant SFRH/BD/87953/2012. José Manuel Salgado was supported by grant CEB/N2020–INV/01/2016 from Project ‘‘BIOTECNORTE-Underpinning Biotechnology to foster the north of Portugal bioeconomy’’ (NORTE-01-0145-FEDER-000004). Luı ´s Abrunhosa was supported by grant UMINHO/BPD/51/2015 from project UID/BIO/04469/2013 financed by FCT/MEC (OE). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER006684) and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020–Programa Operacional Regional do Norte. Noelia Pérez-Rodríguez acknowledges the financial support of FPU fellowship from the Spanish Ministry of Education, Culture and Sports. The authors thank the Spanish Ministry of Economy and Competitiveness for the financial support of this work (Project CTQ2015-71436-C2-1-R), which has partial financial support from the FEDER funds of the European Union.info:eu-repo/semantics/publishedVersio

The global EPTO database: Worldwide occurrences of aquatic insects

Motivation: Aquatic insects comprise 64% of freshwater animal diversity and are widely used as bioindicators to assess water quality impairment and freshwater ecosystem health, as well as to test ecological hypotheses. Despite their importance, a comprehensive, global database of aquatic insect occurrences for mapping freshwater biodiversity in macroecological studies and applied freshwater research is missing. We aim to fill this gap and present the Global EPTO Database, which includes worldwide geo-referenced aquatic insect occurrence records for four major taxa groups: Ephemeroptera, Plecoptera, Trichoptera and Odonata (EPTO). Main type of variables contained: A total of 8,368,467 occurrence records globally, of which 8,319,689 (99%) are publicly available. The records are attributed to the corresponding drainage basin and sub-catchment based on the Hydrography90m dataset and are accompanied by the elevation value, the freshwater ecoregion and the protection status of their location. Spatial location and grain: The database covers the global extent, with 86% of the observation records having coordinates with at least four decimal digits (11.1 m precision at the equator) in the World Geodetic System 1984 (WGS84) coordinate reference system. Time period and grain: Sampling years span from 1951 to 2021. Ninety-nine percent of the records have information on the year of the observation, 95% on the year and month, while 94% have a complete date. In the case of seven sub-datasets, exact dates can be retrieved upon communication with the data contributors.Major taxa and level of measurement: Ephemeroptera, Plecoptera, Trichoptera and Odonata, standardized at the genus taxonomic level. We provide species names for 7,727,980 (93%) records without further taxonomic verification. Software format: The entire tab-separated value (.csv) database can be downloaded and visualized at https://glowa bio.org/proje ct/epto_datab ase/. Fifty individual datasets are also available at https://fred.igb-berlin. de, while six datasets have restricted access. For the latter, we share metadata and the contact details of the authors