Photoemission core level binding energies from multiple sized nanoparticles on the same support: TiO₂(110)/Au

A novel method of measuring the core level binding energies of multiple sized nanoparticles on the same substrate is demonstrated using the early stage of Au nanoparticle growth on reduced r-TiO2(110). This method employed in situ scanning tunneling microscopy (STM) and microfocused X-ray photoemission spectroscopy. An STM tip-shadowing method was used to synthesize patterned areas of Au nanoparticles on the substrate with different coverages and sizes. Patterns were identified and imaged using a UV photoelectron emission microscope. The Au 4f core level binding energies of the nanoparticles were investigated as a function of Au nanoparticle coverage and size. A combination of initial and final state effects modifies the binding energies of the Au 4f core levels as the nanoparticle size changes. When single Au atoms and Au3 clusters are present, the Au 4f7/2 binding energy, 84.42 eV, is similar to that observed at a high coverage (1.8 monolayer equivalent), resulting from a cancellation of initial and final state effects. As the coverage is increased, there is a decrease in binding energy, which then increases at a higher coverage to 84.39 eV. These results are consistent with a Volmer-Weber nucleation-growth model of Au nanoparticles at oxygen vacancies, resulting in electron transfer to the nanoparticles

Thermally induced rotation of 3d orbital stripes in Pr(Sr0.1Ca0.9)(2)Mn2O7

We have investigated orbital ordering in the bilayer manganite, Pr(Sr0.1Ca0.9)2Mn2O7, using synchrotron x-ray diffraction techniques, in particular resonant soft x-ray diffraction. Diffraction signals are observed at (0,12,0) above 300 K and (12,0,0) below 300 K, corresponding to orbital stripes along the a and b axes, respectively. The previously observed transition at 300 K is evidence of a rotation of the orientation of the 3d orbital stripes. Large resonances of the orbital signals are observed at the Mn L edges, with a complex dependence on incident photon energy indicative of a weakly Jahn-Teller distorted system. A structural transition observed at 92 K is found not to involve a further change in the orbital order

Intrinsic and Extrinsic Ferromagnetism in Co-Doped Indium Tin Oxide Revealed Using X-Ray Magnetic Circular Dichroism

The effects of high-temperature annealing on ferromagnetic Co-doped Indium Tin Oxide (ITO) thin films have been investigated using X-ray diffraction (XRD), magnetometry, and X-Ray Magnetic Circular Dichroism (XMCD). Following annealing, the magnetometry results indicate the formation of Co clusters with a significant increase in the saturation magnetization of the thin films arising from defects introduced during cluster formation. However, sum rule analysis of the element-specific XMCD results shows that the magnetic moment at the Co sites is reduced after annealing. The effects of annealing demonstrate that the ferromagnetism observed in the as-deposited Co-doped ITO films arises from intrinsic defects and cannot be related to the segregation of metallic Co clusters.This work was funded by the Engineering and Physical Sciences Research Council. The authors would like to thank Richard Mott for his support during the experiments at Diamond Light Source and the Science and Technology Facilities Council for access to the SQUID instrument.Peer Reviewe

Voltage-driven displacement of magnetic vortex cores

Abstract Magnetic vortex cores in polycrystalline Ni discs underwent non-volatile displacements due to voltage-driven ferroelectric domain switching in single-crystal BaTiO3. This behaviour was observed using photoemission electron microscopy to image both the ferromagnetism and ferroelectricity, while varying in-plane sample orientation. The resulting vector maps of disc magnetization match well with micromagnetic simulations, which show that the vortex core is translated by the transit of a ferroelectric domain wall, and thus the inhomogeneous strain with which it is associated. The non-volatility is attributed to pinning inside the discs. Voltage-driven displacement of magnetic vortex cores is novel, and opens the way for studying voltage-driven vortex dynamics.The Royal Society, Gates Cambridge, the Winton Programme for the Physics of Sustainability, Trinity College (Cambridge), Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) from the Catalan governmen

Voltage-driven annihilation and creation of magnetic vortices in Ni discs.

Using photoemission electron microscopy (PEEM) to image ferromagnetism in polycrystalline Ni disks, and ferroelectricity in their single-crystal BaTiO3 substrates, we find that voltage-driven 90° ferroelectric domain switching serves to reversibly annihilate each magnetic vortex via uniaxial compressive strain, and that the orientation of the resulting bi-domain reveals the chirality of the annihilated vortex. Micromagnetic simulations reveal that only 60% of this strain is required for annihilation. Voltage control of magnetic vortices is novel, and should be energetically favourable with respect to the use of a magnetic field or an electrical current. In future, stray field from bi-domains could be exploited to read vortex chirality. Given that core polarity can already be read via stray field, our work represents a step towards four-state low-power memory applications.The Royal Society, Gates Cambridge, the Winton Programme for the Physics of Sustainability, Trinity College, Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) from the Catalan government for Beatriu de Pinós postdoctoral fellowship (2014 BP-A 00079)

Shear-strain-mediated magnetoelectric effects revealed by imaging.

Large changes in the magnetization of ferromagnetic films can be electrically driven by non-180° ferroelectric domain switching in underlying substrates, but the shear components of the strains that mediate these magnetoelectric effects have not been considered so far. Here we reveal the presence of these shear strains in a polycrystalline film of Ni on a 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 substrate in the pseudo-cubic (011)pc orientation. Although vibrating sample magnetometry records giant magnetoelectric effects that are consistent with the hitherto expected 90° rotations of a global magnetic easy axis, high-resolution vector maps of magnetization (constructed from photoemission electron microscopy data, with contrast from X-ray magnetic circular dichroism) reveal that the local magnetization typically rotates through smaller angles of 62-84°. This shortfall with respect to 90° is a consequence of the shear strain associated with ferroelectric domain switching. The non-orthogonality represents both a challenge and an opportunity for the development and miniaturization of magnetoelectric devices.Isaac Newton Trust, the Royal Society, University of Wisconsin Madison, Agència de Gestió d'Ajuts Universitaris i de Recercaa - Generalitat de Cataluny

Voltage control of magnetic single domains in Ni discs on ferroelectric BaTiO<inf>3</inf>

For 1 μm diameter Ni discs on a BaTiO3 substrate, the local magnetization direction is determined by ferroelectric domain orientation as a consequence of growth strain, such that single domain discs lie on single ferroelectric domains. On applying a voltage across the substrate, ferroelectric domain switching yields non volatile magnetization rotations of 90°, while piezoelectric effects that are small and continuous yield non volatile magnetization reversals that are non-deterministic. This demonstration of magnetization reversal without ferroelectric domain switching implies reduced fatigue, and therefore represents a step towards applications

Imaging the equilibrium state and magnetization dynamics of partially built hard disk write heads

This is the final version of the article. Available from the American Institute of Physics via the DOI in this record.Four different designs of partially built hard disk write heads with a yoke comprising four repeats of NiFe (1nm)/CoFe (50nm) were studied by both x-ray photoemission electron microscopy (XPEEM) and time-resolved scanning Kerr microscopy (TRSKM). These techniques were used to investigate the static equilibrium domain configuration and the magnetodynamic response across the entire structure, respectively. Simulations and previous TRSKM studies have made proposals for the equilibrium domain configuration of similar structures, but no direct observation of the equilibrium state of the writers has yet been made. In this study, static XPEEM images of the equilibrium state of writer structures were acquired using x-ray magnetic circular dichroism as the contrast mechanism. These images suggest that the crystalline anisotropy dominates the equilibrium state domain configuration, but competition with shape anisotropy ultimately determines the stability of the equilibrium state. Dynamic TRSKM images were acquired from nominally identical devices. These images suggest that a longer confluence region may hinder flux conduction from the yoke into the pole tip: the shorter confluence region exhibits clear flux beaming along the symmetry axis, whereas the longer confluence region causes flux to conduct along one edge of the writer. The observed variations in dynamic response agree well with the differences in the equilibrium magnetization configuration visible in the XPEEM images, confirming that minor variations in the geometric design of the writer structure can have significant effects on the process of flux beaming.The authors gratefully acknowledge financial support from the Seagate Plan

Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off.

Epitaxial films may be released from growth substrates and transferred to structurally and chemically incompatible substrates, but epitaxial films of transition metal perovskite oxides have not been transferred to electroactive substrates for voltage control of their myriad functional properties. Here we demonstrate good strain transmission at the incoherent interface between a strain-released film of epitaxially grown ferromagnetic La0.7Sr0.3MnO3 and an electroactive substrate of ferroelectric 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 in a different crystallographic orientation. Our strain mediated magnetoelectric coupling compares well with respect to epitaxial heterostructures, where the epitaxy responsible for strong coupling can degrade film magnetization via strain and dislocations. Moreover, the electrical switching of magnetic anisotropy is repeatable and non volatile. High resolution magnetic vector maps reveal that micromagnetic behaviour is governed by electrically controlled strain and film microstructure. Our demonstration should permit the physical/chemical properties in strain-released epitaxial oxide films to be controlled using electroactive substrates to impart strain via non epitaxial interfaces.Beatriu de Pinós postdoctoral fellowship (2014 BP-A 00079) from the Catalan government via the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR); Ministry of Science and Higher Education of Russian Federation, goszadanie no. 2019-1246; the Royal Society; EPSRC (Grant EP/P009050/1, EP/M010619/1 and the NoWNano DTC); European Research Council (ERC) (ERC-2016-STG-EvoluTEM-715502 and ERC Synergy HETERO2D); “la Caixa” Foundation (ID 100010434)

Manipulating the metal-to-insulator transition and magnetic properties in manganite thin films via epitaxial strain

Strain engineering of epitaxial transition metal oxide heterostructures offers an intriguing opportunity to control electronic structures by modifying the interplay between spin, charge, orbital, and lattice degrees of freedom. Here, we demonstrate that the electronic structure, magnetic and transport properties of La0.9Ba0.1MnO3 thin films can be effectively controlled by epitaxial strain. Spectroscopic studies and first-principles calculations reveal that the orbital occupancy in Mn eg orbitals can be switched from the d3z2-r2 orbital to the dx2-y2 orbital by varying the strain from compressive to tensile. The change of orbital occupancy associated with Mn 3d-O 2p hybridization leads to dramatic modulation of the magnetic and electronic properties of strained La0.9Ba0.1MnO3 thin films. Under moderate tensile strain, an emergent ferromagnetic insulating state with an enhanced ferromagnetic Curie temperature of 215 K is achieved. These findings not only deepen our understanding of electronic structures, magnetic and transport properties in the La0.9Ba0.1MnO3 system, but also demonstrate the use of epitaxial strain as an effective knob to tune the electronic structures and related physical properties for potential spintronic device applications