99 research outputs found
Comparison of total ankle replacement and ankle arthrodesis in patients with haemophilia using gait analysis : two case reports
BACKGROUND: Severe hemophilia is an inherited, lifelong bleeding disorder characterized by spontaneous bleeding, which results in painful joint deformities. Currently two surgical treatments are available to treat haemophilia-related ankle joint destruction: ankle arthrodesis and total ankle replacement. The aim of the present study was to compare these two surgical procedures in haemophiliac subjects. CASE PRESENTATION: Kinematic and dynamic parameters were quantified using a three-dimensional gait-analysis system in two similar clinical cases. In Caucasian case 1, ankle arthrodesis was chosen because of a kinematic ankle flexion defect and lack of dynamic power regeneration. The defect in energy absorption was compensated for by the contralateral side. Total ankle replacement in Caucasian case 2 allowed sparing the ipsilateral knee (maximum 0.27 preoperatively vs. 0.71 W/kg postoperatively) and hip joints powers (maximum 0.43 preoperatively vs. 1.25 W/kg postoperatively) because of the small ankle dorsiflexion motion. CONCLUSIONS: Total ankle replacement is recommended for haemophiliac patients who present with a preserved ankle range of motion
Impacts of climate change on future flood damage on the river Meuse, with a distributed uncertainty analysis
Grafted ionomer complexes and their effect on protein adsorption on silica and polysulfone surfaces
We have studied the formation and the stability of ionomer complexes from grafted copolymers (GICs) in solution and the influence of GIC coatings on the adsorption of the proteins β-lactoglobulin (β-lac), bovine serum albumin (BSA), and lysozyme (Lsz) on silica and polysulfone. The GICs consist of the grafted copolymer PAA28-co-PAPEO22 {poly(acrylic acid)-co-poly[acrylate methoxy poly(ethylene oxide)]} with negatively charged AA and neutral APEO groups, and the positively charged homopolymers: P2MVPI43 [poly(N-methyl 2-vinyl pyridinium iodide)] and PAH∙HCl160 [poly(allylamine hydrochloride)]. In solution, these aggregates are characterized by means of dynamic and static light scattering. They appear to be assemblies with hydrodynamic radii of 8 nm (GIC-PAPEO22/P2MVPI43) and 22 nm (GIC-PAPEO22/PAH∙HCl160), respectively. The GICs partly disintegrate in solution at salt concentrations above 10 mM NaCl. Adsorption of GICs and proteins has been studied with fixed angle optical reflectometry at salt concentrations ranging from 1 to 50 mM NaCl. Adsorption of GICs results in high density PEO side chains on the surface. Higher densities were obtained for GICs consisting of PAH∙HCl160 (1.6 ÷ 1.9 chains/nm2) than of P2MVPI43 (0.6 ÷ 1.5 chains/nm2). Both GIC coatings strongly suppress adsorption of all proteins on silica (>90%); however, reduction of protein adsorption on polysulfone depends on the composition of the coating and the type of protein. We observed a moderate reduction of β-lac and Lsz adsorption (>60%). Adsorption of BSA on the GIC-PAPEO22/P2MVPI43 coating is moderately reduced, but on the GIC-PAPEO22/PAH∙HCl160 coating it is enhanced
Botulinum toxin type A in the treatment of lower-limb spasticity in children with cerebral palsy
Supercritical CO2 as an efficient medium for layered silicate organomodification: preparation of thermally stable organoclays and dispersion in polyamide 6
In this study, the preparation of organoclays via a new process using supercritical carbon dioxide is described. This method turns out to be very efficient with various surfactants, in particular nonwater-soluble alkylphosphonium salts. The influence of the surfactant as well as of the clay nature on the thermal stability of the organoclay is evaluated by thermogravimetric analysis. Phosphonium-based montmorillonites are up to 90 °C more stable than ammonium-based montmorillonites. Moreover, the use of hectorite adds another 40 °C of thermal stability to the phosphonium-modified clays. These organomodified clays have been melt-blended with polyamide 6 and morphology as well as fire properties of the nanocomposites are discussed, in terms of influence of the stability of organoclays. For the first time, comparison of nanocomposites based on clay organomodified by ammonium and phosphonium salts of the very same structure is reported
Foaming in CO2 sc medium as an efficient way to produce electromagnetic interference shielding materials
This communication reports
on the preparation of novel nanocomposites foams that
are efficient broadband microwave absorbers.7 Multiwalled
carbon nanotubes (MWNT) are first successfully
dispersed into polymer matrix by melt-blending as
confirmed by TEM microscopy and rheology. Then
foaming of these nanocomposites8 occurs under
supercritical CO2 conditions by a two-step process.9
This physical foaming constitutes a green alternative to
classical foaming agents.10 Well-defined microcellular
foams11 were obtained with cell size around 10-50 μm
and cellular density around 108 cells per cm3, the
morphology of the foam was determined by SEM
microscopy. The impact of several criteria on the
morphology of the foam will be discussed. The EMI
shielding efficiency of these materials are then
evaluated and compared to the non-foamed
nanocomposites. Finally, we will discuss about the
design of the foam that is essential to optimize the
performances of the EMI absorber
MODELLING FLOOD EVENTS USING HIGH RESOLUTION DIGITAL ELEVATION MODELS AND CONSIDERING THE SEDIMENT INTERACTION WITH CONSTRUCTIONS IN FLOODPLAINS
The main objective of the present paper is a description of two effective numerical 2D models to be used as strategic tools in the process of flood risks assessment and mitigation. The first one is a model for hydrodynamics simplified according to the diffusive assumption while the second one is a complete model based on the shallow water equations. Each of them is solved with an efficient numerical technique (including implicit time integration schemes and GMRES linear solvers) maximizing the convergence rate towards a steady state. A practical case study, for which a high resolution Digital Elevation Model exists, will be presented. The study shows the consequences on structures of a new construction in the floodplain in terms of inundation and erosion
Contribution of land use changes to future flood damage along the river Meuse in the Walloon region
Managing flood risk in Europe is a critical issue because climate change is expected to increase flood hazard in many european countries. Beside climate change, land use evolution is also a key factor influencing future flood risk. The core contribution of this paper is a new methodology to model residential land use evolution. Based on two climate scenarios ("dry" and "wet"), the method is applied to study the evolution of flood damage by 2100 along the river Meuse. Nine urbanization scenarios were developed: three of them assume a "current trend" land use evolution, leading to a significant urban sprawl, while six others assume a dense urban development, characterized by a higher density and a higher diversity of urban functions in the urbanized areas. Using damage curves, the damage estimation was performed by combining inundation maps for the present and future 100 yr flood with present and future land use maps and specific prices. According to the dry scenario, the flood discharge is expected not to increase. In this case, land use changes increase flood damages by 1–40%, to €334–462 million in 2100. In the wet scenario, the relative increase in flood damage is 540–630%, corresponding to total damages of €2.1–2.4 billion. In this extreme scenario, the influence of climate on the overall damage is 3–8 times higher than the effect of land use change. However, for seven municipalities along the river Meuse, these two factors have a comparable influence. Consequently, in the "wet" scenario and at the level of the whole Meuse valley in the Walloon region, careful spatial planning would reduce the increase in flood damage by no more than 11–23%; but, at the level of several municipalities, more sustainable spatial planning would reduce future flood damage to a much greater degree
The effects of real and artificial Leg Length Discrepancy on mechanical work and energy cost during the gait
Organometallic-mediated alternating radical copolymerization of tert-butyl-2- trifluoromethacrylate with vinyl acetate and synthesis of block copolymers thereof
Organometallic-mediated radical polymerization (OMRP) has given access to well-defined poly(vinyl acetate-alt-tert-butyl-2-trifluoromethacrylate)-b-poly(vinyl acetate) and poly (VAc- alt-MAF-TBE) copolymers composed of two electronically distinct monomers: vinyl acetate (VAc, donor, D) and tert-butyl-2-trifluoromethacrylate (MAF-TBE, acceptor, A), with low dispersity (≤1.24) and molar masses up to 57 000 g mol−1. These copolymers have a precise 1:1 alternating structure over a wide range of comonomer feed compositions. The reactivity ratios are determined as rVAc = 0.01 ± 0.01 and rMAF-TBE = 0 at 40 °C. Remarkably, from a feed containing >50% molar VAc content, poly(VAc-alt-MAF-TBE)-b- PVAc block copolymers are produced via a one- pot synthesis. Such diblock copolymers exhibit two glass transition temperatures attributed to the alternating and homopolymer sequences. The OMRP of this fluorine-containing alter- nating monomer system may provide access to a wide range of new polymer materials
- …