Flame-retardant composite materials

The properties of eight different graphite composite panels fabricated using four different resin matrices and two types of graphite reinforcement are described. The resin matrices included: VPSP/BMI, a blend of vinylpolystyryl pyridine and bismaleimide; BMI, a bismaleimide; and phenolic and PSP, a polystyryl pyridine. The graphite fiber used was AS-4 in the form of either tape or fabric. The properties of these composites were compared with epoxy composites. It was determined that VPSP/BMI with the graphite tape was the optimum design giving the lowest heat release rate

Fire and heat resistant laminating resins based on maleimido and citraconimido substituted 1-(diorgano oxyphosphonyl) methyl -2,4- and -2,6- diaminobenzenes

A class of fire and heat resistant bisimide resins prepared by thermal polymerization of maleimido or citraconimido substituted 1-((dialkoxyphosphonyl) methyl)-2-4 and -2,6-diaminobenzenes are described. The polymer precursors are prepared by reacting 1-((diorganooxyphosphonyl) methyl)-2-4 and -2,6-diaminobenzenes with maleic anhydride or citraconic anhydride in a mole ratio 1:2. Chain extension of the monomers is achieved by reacting the mono-N-maleimido derivatives of 1-((diorganooxyphosphonyl) methyl)-2,4 and -2,6-diaminobenzenes with aryl tetracarboxylic dianhydrides, such as benzophenone tetracarbocylic dianhydride, or aryl diisocyanates, such as methylenebis (4-phenylisocyanate), in a mole ratio 2:1. The polymerization of the monomers is studied by differential scanning calorimetry (DSC) and the thermal stability of the polymers is ascertained by thermogravimetric analysis (TGA)

The 1-((diorganooxyphosphonyl)-methyl)-2,4- and -2,6-diamido benzenes

1-((Diorgano oxyphosphonyl) methyl)-2,4- and -2,6-dinitro and diamino benzenes are prepared by nitrating an (organophosphonyl) methyl benzene to produce the dinitro compounds which are then reduced to the diamino compounds. The organo grounds (alkyl, haloalkyl, aryl) on the phosphorus may be removed to give the free acids (HO)2P(double bond O)single bond. The diamino compounds may be polymerized with dianhydrides or diacyl halides to produce fire and flame resistant polymers which are useful in the manufacture of aircraft structures

Some 1-(diorganooxyphosphonyl)methyl-2,4- and -2,6-dinitro-benzenes

1-(Diorgano oxyphosphonyl) methyl) 2,4- and 2,6-dinitro- and diamino benzenes are prepared by nitrating an (organophosphonyl)methly benzene to produce the dinitro compounds which are then reduced to the diamino compounds. The organo group (alkyl, haloalkyl, aryl) on the phosphorus may be removed to give the free acids, (HO)2P(double bond O) single bond. The diamino compounds may be polymerized with dianhydrides or diacyl halides to produce fire and flame resistant polymers which are useful in the manufacture of aircraft structures

The 1-((diorganooxy phosphonyl) methyl)-2,4- and -2,6-diamino benzenes and their derivatives

The 1-((diorganooxy phosphonyl) methyl)-2,4- and -2,6-dinitro- and diamino benzenes are prepared by nitrating an (organo phosphenyl) methyl benzene to produce the dinitro compounds which are then reduced to the diamino compounds. The organo groups (alkyl, haloalkyl, aryl) on the phosphorus may be removed to give the free acids (HO)2P(=0)-. The diamino compounds may be polymerized with dianhydrides or diacyl halides to produce fire and flame resistant polymers which are useful in the manufacture of aircraft structures

Fire and heat resistant laminating resins based on malemeido and citraconimido substituted 1 -2,4- and -2,6- diaminobenzenes

A novel class of fire and heat resistant bisimide resins prepared by thermal polymerization of maleimido or citraconimido substituted 1-(dialkox phosphonyl) methyl-2-4 and -2,6-diamino benzenes was presented. The polymer precursors are prepared by reacting 1-(diorgano oxyphosphonyl) methyl-2-4- and -2,6-diamino benzenes with maliec anhydride or citraconic anhydride in a mole ratio 1:2. Chain extension of the monomers is achieved by reacting the mono-N-maleimido derivaties of 1 (diorgano oxyphosphonyl) methyl -2,4- and -2,6-diamino benzenes with aryl tetracarboxylic dianhydrides, such as benzophenone tetracarboxylic dianhydride, or aryl diisocyanates, such as methylene bis(4-phenyl isocyanate), in a mole ratio 2:1. The polymerization of the monomers is studied by diferential scanning calorimetry and the thermal stability of the polymers is ascertained by thermogravimetric analysis

Optimization of aircraft interior panels

Eight different graphite composite panels were fabricated using four different resin matrices. The resin matrices included Hercules 71775, a blend of vinylpolystyrpyridine and bismaleimide, H795, a bismaleimide, Cycom 6162, a phenolic, and PSP 6022M, a polystyrylpyridine. Graphite panels were fabricated using fabric or unidirectional tape. This report describes the processes for preparing these panels and some of their mechanical, thermal and flammability properties. Panel properties are compared with state-of-the-art epoxy fiberglass composite panels

Ureteroscopic treatment of larger renal calculi (\u3e2 cm).

OBJECTIVES: To evaluate the current status of ureteroscopic lithotripsy (UL) for treating renal calculi of \u3e2 cm, as advances in flexible ureteroscope design, accessory instrumentation and lithotrites have revolutionised the treatment of urinary calculi. While previously reserved for ureteric and small renal calculi, UL has gained an increasing role in the selective management of larger renal stone burdens. METHODS: We searched the available databases, including PubMed, Google Scholar, and Scopus, for relevant reports in English, and the article bibliographies to identify additional relevant articles. Keywords included ureteroscopy, lithotripsy, renal calculi, and calculi \u3e2 cm. Retrieved articles were reviewed to consider the number of patients, mean stone size, success rates, indications and complications. RESULTS: In all, nine studies (417 patients) were eligible for inclusion. After one, two or three procedures the mean (range) success rates were 68.2 (23-84)%, 87.1 (79-91)% and 94.4 (90.1-96.7)%, respectively. Overall, the success rate was \u3e90% with a mean of 1.2-2.3 procedures per patient. The overall complication rate was 10.3%, including six (1.4%) intraoperative and 37 (8.9%) postoperative complications, most of which were minor. The most common indications for UL were a failed previous treatment (46%), comorbidities (18.2%), and technical and anatomical factors (12.3%). CONCLUSIONS: UL is safe and effective for treating large renal calculi. While several procedures might be required for total stone clearance, UL should be considered a standard approach in the urologist\u27s options treating renal calculi of \u3e2 cm

Method and apparatus for measuring temperatures in fabrics and flexible thermal insulations

A temperature sensor uses a type R thermocouple wire element in a ceramic sheath to sense temperatures up to 3,200 deg F., and is particularly suitable for flexible insulations. The sensor includes a thermocouple wire embedded in a sheath having two sections disposed at right angles to each other. The junction of the thermocouple is located at one end of one of the sections and the lead wires extend from the other section. The section which includes the junction is secured to a flexible surface with ceramic cement

Whose Identity? An Argument for Granting Authority of Identity to the Individual

Who are you? And did you have any say in choosing who you are? Identity is a complicated issue, it is both individualistic and necessarily relies on your environment and peers. I believe that as it stands, your identity may be a result of both solitary and societal thinking. However, I think that society and government act as the sole authenticators of an individual’s identity. I do not believe this is how an individual’s life ought to be treated. Thus, I am arguing in this thesis that the individual has the capacity to choose their own identity, and that society and government ought to authenticate the decisions made by individuals. In order to prove my claim I will first specify the types of identity I will be discussing in this thesis. I will then explore the theories of three philosophers: Anthony Appiah, Ian Hacking, and Charles Taylor. In chapters 2 & 3, I will first analyze Anthony Appiah, who in arguing against the existence of race posits several ideas about identity including a theory of identity. Second, in chapter 4, I will analyze Ian Hacking, who presents a theory of identity creation, named labeling theory, and then presents a counter-theory of identity creation. Third, in chapter 5, I will analyze Charles Taylor’s claims about the effect recognition has on identity formation. Continuing to analyze Taylor in chapter 5, I will also analyze the importance of championing the politics of difference both to the individual and towards my claim. I will then provide examples of how my claim may be actualized in chapter 6, alongside counterarguments to my claims. Last, I will conclude my thesis in chapter 7