The effect of alkalisation on the mechanical properties of natural fibres

A study on the effect of alkalisaton using 3% NaOH solution was carried out on Flax, Kenaf, Abaca and Sisal to observe the impact that the common pre-treatment process has on fibre mechanical properties. The result of the investigation indicated that over-treatment of natural fibres using NaOH could have a negative effect on the base fibre properties. It is concluded that a treatment time of less than 10 minutes is sufficient to remove hemicelluloses and to give the optimum effect

Vacuum infusion of natural fibre composites for structural applications

Numerous methods of manufacturing natural fibre composites have been reported in the literature, including compression moudling, often in conjunction with a hot press. Other forms of composite manufacture include 'Vacuum Assisted Resin Transfer Moulding' (VATRM) and the 'Seemann Composite Resin Infusion Moulding Process' (SCRIMP). These methods have been reported to produce natural fibre composies with reasonable mechanical properties [1-2]. In this paper, a vacuum infusion rig is described that has been developed to produce consistent quality composite plates for studies into optimising natural fibre composites. The process aims to harness the benefits of vacuum infusion and compression moulding, where vacuum infusion encourages the removal of trapped air in the system and hence avoid reduction, and additional compression moulding can help to achieve high volume fractions that are otherwise difficult in other processes

Mechanical testing of natural fibre reinforced polyester resin composites and Mode 1 fracture toughness testing of resin blocks

Recent European Parliament directive requires companies to achieve materials recycling greater than 80% in particular in the automotive sector [1]. The research on natural fibre based composite materials fits well into this ecological image. The advantages of natural fibres over synthetic materials include, low density, relative cheapness, availability and biodegradability. In this paper we explore the fabrication and mechanical testing of natural fibre composites and this is part of an on going study at Strathclyde University and describes the fabrication of composites using natural fibre and styrene polyester resin. The properties of the synthetic resin can be varied by changing the catalysts concentration and flexural (three point bending) and single-edged notched bending (SENB) properties are reported at different concentrations of the catalyst

Fast Hierarchical Clustering and Other Applications of Dynamic Closest Pairs

We develop data structures for dynamic closest pair problems with arbitrary distance functions, that do not necessarily come from any geometric structure on the objects. Based on a technique previously used by the author for Euclidean closest pairs, we show how to insert and delete objects from an n-object set, maintaining the closest pair, in O(n log^2 n) time per update and O(n) space. With quadratic space, we can instead use a quadtree-like structure to achieve an optimal time bound, O(n) per update. We apply these data structures to hierarchical clustering, greedy matching, and TSP heuristics, and discuss other potential applications in machine learning, Groebner bases, and local improvement algorithms for partition and placement problems. Experiments show our new methods to be faster in practice than previously used heuristics.Comment: 20 pages, 9 figures. A preliminary version of this paper appeared at the 9th ACM-SIAM Symp. on Discrete Algorithms, San Francisco, 1998, pp. 619-628. For source code and experimental results, see http://www.ics.uci.edu/~eppstein/projects/pairs

Phase transitions with four-spin interactions

Using an extended Lee-Yang theorem and GKS correlation inequalities, we prove, for a class of ferromagnetic multi-spin interactions, that they will have a phase transition(and spontaneous magnetization) if, and only if, the external field $h=0$ (and the temperature is low enough). We also show the absence of phase transitions for some nonferromagnetic interactions. The FKG inequalities are shown to hold for a larger class of multi-spin interactions

Triviality and the (Supersymmetric) See-Saw

For the D=5 Majorana neutrino mass operator to have a see-saw ultraviolet completion that is viable up to the Planck scale, the see-saw scale is bounded above due to triviality limits on the see-saw couplings. For supersymmetric see-saw models, with realistic neutrino mass textures, we compare constraints on the see-saw scale from triviality bounds, with those arising from experimental limits on induced charged-lepton flavour violation, for both the CMSSM and for models with split supersymmetry.Comment: 27 pages, 7 figures, references adde

Some Agents are more Similar than Others:Customer Orientation of Frontline Robots and Employees

Purpose: The impact of frontline robots (FLRs) on customer orientation perceptions remains unclear. This is remarkable because customers may associate FLRs with standardization and cost-cutting, such that they may not fit firms that aim to be customer oriented. Design/methodology/approach: In four experiments, data are collected from customers interacting with frontline employees (FLEs) and FLRs in different settings. Findings: FLEs are perceived as more customer-oriented than FLRs due to higher competence and warmth evaluations. A relational interaction style attenuates the difference in perceived competence between FLRs and FLEs. These agents are also perceived as more similar in competence and warmth when FLRs participate in the customer journey's information and negotiation stages. Switching from FLE to FLR in the journey harms FLR evaluations. Practical implications: The authors recommend firms to place FLRs only in the negotiation stage or in both the information and negotiation stages of the customer journey. Still then customers should not transition from employees to robots (vice versa does no harm). Firms should ensure that FLRs utilize a relational style when interacting with customers for optimal effects. Originality/value: The authors bridge the FLR and sales/marketing literature by drawing on social cognition theory. The authors also identify the product categories for which customers are willing to negotiate with an FLR. Broadly speaking, this study’s findings underline that customers perceive robots as having agency (i.e. the mental capacity for acting with intentionality) and, just as humans, can be customer-oriented.</p

Coupling between counterpropagating cladding modes in fiber Bragg gratings

We present an experimental demonstration of energy transfer between counterpropagating cladding modes in a fiber Bragg grating (FBG). A strong FBG written in a standard photosensitive optical fiber is illuminated with a single cladding mode, and the power transferred between the forward propagating cladding mode and different backward propagating cladding modes is measured by using two auxiliary long period gratings. Resonances between cladding modes having 30 pm bandwidth and 8 dB rejection have been observed

Out of the Closet and Onto the Coast: Aesthetic Zoning as Visual Resource Management

The North Carolina Supreme Court has recently endorsed the view that aesthetics alone is a proper basis for the exercise of police power in coastal communities. Still, if certain regulatory precautions are not taken, it is possible that important scenic resources will remain unprotected. This investigation provides a theoretical defense for broadening and systematizing the application of aesthetic zoning techniques

Hamiltonian Cycles on Random Eulerian Triangulations

A random Eulerian triangulation is a random triangulation where an even number of triangles meet at any given vertex. We argue that the central charge increases by one if the fully packed O(n) model is defined on a random Eulerian triangulation instead of an ordinary random triangulation. Considering the case n -> 0, this implies that the system of random Eulerian triangulations equipped with Hamiltonian cycles describes a c=-1 matter field coupled to 2D quantum gravity as opposed to the system of usual random triangulations equipped with Hamiltonian cycles which has c=-2. Hence, in this case one should see a change in the entropy exponent from the value gamma=-1 to the irrational value gamma=(-1-\sqrt{13})/6=-0.76759... when going from a usual random triangulation to an Eulerian one. A direct enumeration of configurations confirms this change in gamma.Comment: 22 pages, 9 figures, references and a comment adde