Rapid and mobile determination of alcoholic strength in wine, beer and spirits using a flow-through infrared sensor

<p>Abstract</p> <p>Background</p> <p>Ever since Gay-Lussac's time, the alcoholic strength by volume (% vol) has been determined by using densimetric measurements. The typical reference procedure involves distillation followed by pycnometry, which is comparably labour-intensive and therefore expensive. At present, infrared (IR) spectroscopy in combination with multivariate regression is widely applied as a screening procedure, which allows one to determine alcoholic strength in less than 2 min without any sample preparation. The disadvantage is the relatively large investment for Fourier transform (FT) IR or near-IR instruments, and the need for matrix-dependent calibration. In this study, we apply a much simpler device consisting of a patented multiple-beam infrared sensor in combination with a flow-through cell for automated alcohol analysis, which is available in a portable version that allows for on-site measurements.</p> <p>Results</p> <p>During method validation, the precision of the infrared sensor was found to be equal to or better than densimetric or FTIR methods. For example, the average repeatability, as determined in 6 different wine samples, was 0.05% vol and the relative standard deviation was below 0.2%. Accuracy was ensured by analyzing 260 different alcoholic beverages in comparison to densimetric or FTIR results. The correlation was linear over the entire range from alcohol-free beers up to high-proof spirits, and the results were in substantial agreement (R = 0.99981, p < 0.0001, RMSE = 0.279% vol). The applicability of the device was further proven for the analysis of wines during fermentation, and for the determination of unrecorded alcohol (i.e. non-commercial or illicit products).</p> <p>Conclusions</p> <p>The flow-through infrared device is much easier to handle than typical reference procedures, while time-consuming sample preparation steps such as distillation are not necessary. Therefore, the alcoholic strength can be economically and quickly controlled (requiring less than 60 s per sample). The device also gives the opportunity for mobile on-site control in the context of labelling control of wine, beer and spirits, the process monitoring of fermentations, or the evaluation of unrecorded alcohols.</p

Short-term salivary acetaldehyde increase due to direct exposure to alcoholic beverages as an additional cancer risk factor beyond ethanol metabolism

<p>Abstract</p> <p>Background</p> <p>An increasing body of evidence now implicates acetaldehyde as a major underlying factor for the carcinogenicity of alcoholic beverages and especially for oesophageal and oral cancer. Acetaldehyde associated with alcohol consumption is regarded as 'carcinogenic to humans' (IARC Group 1), with sufficient evidence available for the oesophagus, head and neck as sites of carcinogenicity. At present, research into the mechanistic aspects of acetaldehyde-related oral cancer has been focused on salivary acetaldehyde that is formed either from ethanol metabolism in the epithelia or from microbial oxidation of ethanol by the oral microflora. This study was conducted to evaluate the role of the acetaldehyde that is found as a component of alcoholic beverages as an additional factor in the aetiology of oral cancer.</p> <p>Methods</p> <p>Salivary acetaldehyde levels were determined in the context of sensory analysis of different alcoholic beverages (beer, cider, wine, sherry, vodka, calvados, grape marc spirit, tequila, cherry spirit), without swallowing, to exclude systemic ethanol metabolism.</p> <p>Results</p> <p>The rinsing of the mouth for 30 seconds with an alcoholic beverage is able to increase salivary acetaldehyde above levels previously judged to be carcinogenic in vitro, with levels up to 1000 μM in cases of beverages with extreme acetaldehyde content. In general, the highest salivary acetaldehyde concentration was found in all cases in the saliva 30 sec after using the beverages (average 353 μM). The average concentration then decreased at the 2-min (156 μM), 5-min (76 μM) and 10-min (40 μM) sampling points. The salivary acetaldehyde concentration depends primarily on the direct ingestion of acetaldehyde contained in the beverages at the 30-sec sampling, while the influence of the metabolic formation from ethanol becomes the major factor at the 2-min sampling point.</p> <p>Conclusions</p> <p>This study offers a plausible mechanism to explain the increased risk for oral cancer associated with high acetaldehyde concentrations in certain beverages.</p

The Mediterranean diet for Polish infants: a losing struggle or a battle still worth fighting?

The Mediterranean diet is well known for its health-promoting effects. Among its key ingredients, olive oil is the most characteristic. Processing industries have been successfully manufacturing and marketing jarred baby foods with the use of vegetable oils, including olive oil, as well as other sources of visible fat. We aimed to survey manufacturer claims concerning added fat in jarred infant foods supplied to the Polish market. A total of 124 kinds of infant foods from six suppliers were analyzed. Corn, canola, and soybean oil occupied the first three positions, respectively, in rank order of vegetable oils used in jarred baby foods. In our sample, only one type of ready-to-eat jars with vegetables contained olive oil. 11% of products contained cow milk butter or cream. 61% of jarred “dinners” contained poultry or fish, which are typical sources of animal protein in the Mediterranean diet. Given that commercial baby foods currently available in the Polish market contain no olive oil, we advocate considering home preparation of infant foods with the use of visible fat. Medical professionals should encourage food manufacturers to return to the concepts of the Mediterranean diet for young consumers, aimed at long-term health

Is alcohol consumption a risk factor for prostate cancer? A systematic review and meta-analysis.

Background: Research on a possible causal association between alcohol consumption and risk of prostate cancer is inconclusive. Recent studies on associations between alcohol consumption and other health outcomes suggest these are influenced by drinker misclassification errors and other study quality characteristics. The influence of these factors on estimates of the relationship between alcohol consumption and prostate cancer has not been previously investigated. Methods: PubMed and Web of Science searches were made for case–control and cohort studies of alcohol consumption and prostate cancer morbidity and mortality (ICD–10: C61) up to December 2014. Studies were coded for drinker misclassification errors, quality of alcohol measures, extent of control for confounding and other study characteristics. Mixed models were used to estimate relative risk (RR) of morbidity or mortality from prostate cancer due to alcohol consumption with study level controls for selection bias and confounding. Results: A total of 340 studies were identified of which 27 satisfied inclusion criteria providing 126 estimates for different alcohol exposures. Adjusted RR estimates indicated a significantly increased risk of prostate cancer among low (RR = 1.08, P 1.3, <24 g per day). This relationship is stronger in the relatively few studies free of former drinker misclassification error. Given the high prevalence of prostate cancer in the developed world, the public health implications of these findings are significant. Prostate cancer may need to be incorporated into future estimates of the burden of disease alongside other cancers (e.g. breast, oesophagus, colon, liver) and be integrated into public health strategies for reducing alcohol related disease

Russian roulette with unlicensed fat-burner drug 2,4-dinitrophenol (DNP) : evidence from a multidisciplinary study of the internet, bodybuilding supplements and DNP users

BACKGROUND: 2,4-Dinitrophenol (DNP) poses serious health-risks to humans. The aims of this three-stage multidisciplinary project were, for the first time, to assess the risks to the general public from fraudulent sale of or adulteration/contamination with DNP; and to investigate motives, reasons and risk-management among DNP-user bodybuilders and avid exercisers. METHODS: Using multiple search-engines and guidance for Internet research, online retailers and bodybuilding forums/blogs were systematically explored for availability of DNP, advice offered on DNP use and user profiles. Ninety-eight pre-workout and weight-loss supplements were purchased and analysed for DNP using liquid-chromatography-mass-spectrometry. Psychosocial variables were captured in an international sample of 35 DNP users (26.06 ± 6.10 years, 94.3 % male) with an anonymous, semi-qualitative self-reported survey. RESULTS: Although an industrial chemical, evidence from the Internet showed that DNP is sold 'as is', in capsules or tablets to suit human consumption, and is used 'uncut'. Analytical results confirmed that DNP is not on the supplement market disguised under fictitious supplement names, but infrequently was present as contaminant in some supplements (14/98) at low concentration (<100mcg/kg). Users make conscious and 'informed' decisions about DNP; are well-prepared for the side-effects and show nonchalant attitude toward self-experimentation with DNP. Steps are often taken to ensure that DNP is genuine. Personal experience with performance- and appearance enhancing substances appears to be a gateway to DNP. Advice on DNP and experiences are shared online. The significant discrepancy between the normative perception and the actual visibility suggests that DNP use is-contrary to the Internet accounts-a highly concealed and lonesome activity in real life. Positive experiences with the expected weight-loss prevail over the negative experiences from side effects (all but two users considered using DNP again) and help with using DNP safely is considered preferable over scare-tactics. CONCLUSION: Legislation banning DNP sale for human consumption protects the general public but DNP is sold 'as is' and used 'uncut' by determined users who are not dissuaded from experimenting with DNP based on health threats. Further research with stakeholders' active participation is imperative for targeted, proactive public health policies and harm-reduction measures for DNP, and other illicit supplements

Yeasts associated with the production of distilled alcoholic beverages

Distilled alcoholic beverages are produced firstly by fermenting sugars emanating from cereal starches (in the case of whiskies), sucrose-rich plants (in the case of rums), fructooligosaccharide-rich plants (in the case of tequila) or from fruits (in the case of brandies). Traditionally, such fermentations were conducted in a spontaneous fashion, relying on indigenous microbiota, including wild yeasts. In modern practices, selected strains of Saccharomyces cerevisiae are employed to produce high levels of ethanol together with numerous secondary metabolites (eg. higher alcohols, esters, carbonyls etc.) which greatly influence the final flavour and aroma characteristics of spirits following distillation of the fermented wash. Therefore, distillers, like winemakers, must carefully choose their yeast strain which will be very important in providing the alcohol content and the sensory profiles of spirit beverages. This Chapter discusses yeast and fermentation aspects associated with the production of selected distilled spirits and highlights similarities and differences with the production of wine