Long-term erosion rates of Panamanian drainage basins determined using in situ 10Be

Erosion rates of tropical landscapes are poorly known. Using measurements of in situ-produced 10Be in quartz extracted from river and landslide sediment samples, we calculate long-term erosion rates for many physiographic regions of Panama. We collected river sediment samples from a wide variety of watersheds (n = 35), and then quantified 24 landscape-scale variables (physiographic, climatic, seismic, geologic, and land-use proxies) for each watershed before determining the relationship between these variables and long-term erosion rates using linear regression, multiple regression, and analysis of variance (ANOVA). We also used grain-size-specific 10Be analysis to infer the effect of landslides on the concentration of 10Be in fluvial sediment and thus on erosion rates. Cosmogenic 10Be-inferred, background erosion rates in Panama range from 26 to 595 m My− 1, with an arithmetic average of 201 m My− 1, and an area-weighted average of 144 m My− 1. The strongest and most significant relationship in the dataset was between erosion rate and silicate weathering rate, the mass of material leaving the basin in solution. None of the topographic variables showed a significant relationship with erosion rate at the 95% significance level; we observed weak but significant correlation between erosion rates and several climatic variables related to precipitation and temperature. On average, erosion rates in Panama are higher than other cosmogenically-derived erosion rates in tropical climates including those from Puerto Rico, Madagascar, Australia and Sri Lanka, likely the result of Panama's active tectonic setting and thus high rates of seismicity and uplift. Contemporary sediment yield and cosmogenically-derived erosion rates for three of the rivers we studied are similar, suggesting that human activities are not increasing sediment yield above long-term erosion rate averages in Panama. 10Be concentration is inversely proportional to grain size in landslide and fluvial samples from Panama; finer grain sizes from landslide material have lower 10Be concentration than fine-grained fluvial sediment. Large grains from both landslide and stream sediments have similarly low 10Be concentrations. These data suggest that fluvial gravel is delivered to the channel by landslides whereas sand is preferentially delivered by soil creep and bank collapse. Furthermore, the difference in 10Be concentration in sand-sized material delivers by soil creep and that delivered by landsliding suggests that the frequency and intensity of landslides influence basin scale erosion rates

Identifying novel genetic determinants of hemostatic balance

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73734/1/j.1538-7836.2005.01461.x.pd

Laparoscopic sacrohysteropexy and myomectomy for uterine prolapse: a case report and review of the literature

<p>Abstract</p> <p>Introduction</p> <p>A large number of hysterectomies are carried out for uterine prolapse, menorrhagia and other symptomatic but benign gynaecological conditions, which has increased interest in new approaches to treat these disorders. These new procedures are less invasive and offer reduced risk and faster recovery.</p> <p>Case presentation</p> <p>Sacrohysteropexy can be carried out instead of vaginal hysterectomy in the treatment of uterine prolapse. It involves using a synthetic mesh to suspend the uterus to the sacrum; this maintains durable anatomic restoration, normal vaginal axis and sexual function. A laparoscopic approach has major advantages over the abdominal route including shorter recovery time and less adhesion formation. We describe a laparoscopic sacrohysteropexy in a 55-year-old Caucasian British woman that was technically difficult. An intramural uterine fibroid was encroaching just above the uterosacral ligament making mesh positioning impossible. This was removed and the procedure completed successfully.</p> <p>Conclusion</p> <p>Posterior wall fibroid is not a contraindication for laparoscopic sacrohysteropexy. This procedure has increasingly become an effective treatment of uterine prolapse in women who have no indication for hysterectomy.</p

New 10Be exposure ages improve Holocene ice sheet thinning history near the grounding line of Pope Glacier, Antarctica

Evidence for the timing and pace of past grounding line retreat of the Thwaites Glacier system in the Amundsen Sea embayment (ASE) of Antarctica provides constraints for models that are used to predict the future trajectory of the West Antarctic Ice Sheet (WAIS). Existing cosmogenic nuclide surface exposure ages suggest that Pope Glacier, a former tributary of Thwaites Glacier, experienced rapid thinning in the early to mid-Holocene. There are relatively few exposure ages from the lower ice-free sections of Mount Murphy (< 300 m asl) that are uncomplicated by either nuclide inheritance or scattering due to localised topographic complexities; this makes the trajectory for the latter stages of deglaciation uncertain. This paper presents 12 new 10Be exposure ages from erratic cobbles collected from the western flank of Mt Murphy, within 160 m of the modern ice surface and 1 km from the present grounding line. The ages comprise two tightly clustered populations with mean deglaciation ages of 7.1 ± 0.1 ka and 6.4 ± 0.1 ka (1SE). Linear regression analysis applied to the age-elevation array of all available exposure ages from Mt Murphy indicates that the median rate of thinning of Pope Glacier was 0.27 m yr-1 between 8.1–6.3 ka, occurring 1.5 times faster than previously thought. Furthermore, this analysis better constrains the uncertainty (95 % confidence interval) in the timing of deglaciation at the base of the Mt Murphy vertical profile (~80 m above the modern ice surface), shifting it to earlier in the Holocene (from 5.2 ± 0.7 ka to 6.3 ± 0.4 ka). Taken together, the results presented here suggest that early–mid Holocene thinning of Pope Glacier occurred over a shorter interval than previously assumed and permit a longer duration over which subsequent late Holocene rethickening could have occurred

Mortality among US employees of a large computer manufacturing company: 1969–2001

BACKGROUND: Previous studies suggested increased cancer incidence and mortality in workers exposed to solvents and other chemicals in computer manufacturing jobs. Most previous studies were of small cohorts and findings were inconsistent. A lawsuit involving a large U.S. company produced a data file for analysis. This study sought to elucidate patterns of mortality in workers who were engaged manufacturing computers and related electronic components in the largest database available to date. METHODS: A proportional mortality and proportional cancer mortality analysis of deaths in eligible workers between 1969 and 2001 was carried out, with U.S. population mortality data as the standard for comparison. Mortality and work history data was from corporate mortality and work history files produced during litigation and standard U.S. and state mortality files. The study base comprised 31,941 decedents who died between 1969 and 2001, who had worked for at least five years and whose death information was collected in the corporate mortality file. Proportional mortality ratios (PMRs) and Proportional Cancer Mortality Ratios (PCMRs) and their 95% confidence intervals were computed for 66 causes of death in males and females. RESULTS: PMRs for all cancers combined were elevated in males (PMR = 107; 95% CI = 105–109) and females (PMR = 115; 95% CI = 110–119); several specific cancers and other causes of death were also significantly elevated in both males and females. There were reduced deaths due to non-malignant respiratory disease in males and females and heart disease in females; several specific cancers and other causes of death were significantly reduced in both males and females. Proportional cancer mortality ratios (PCMRs) for brain and central nervous system cancer were elevated (PCMR = 166; 95% CI = 129–213), kidney cancer (PCMR = 162; 95% CI = 124–212), melanoma of skin (PCMR = 179; 95% CI = 131–244) and pancreatic cancer (PCMR = 126; 95% CI = 101–157) were significantly elevated in male manufacturing workers. Kidney cancer (PCMR = 212; 95% CI = 116–387) and cancer of all lymphatic and hematopoietic tissue (PCMR = 162; 95% CI = 121–218) were significantly elevated in female manufacturing workers. CONCLUSION: Mortality was elevated due to specific cancers and among workers more likely to be exposed to solvents and other chemical exposures in manufacturing operations. Due to lack of individual exposure information, no conclusions are made about associations with any particular agent

Gravito-electromagnetic analogies

We reexamine and further develop different gravito-electromagnetic (GEM) analogies found in the literature, and clarify the connection between them. Special emphasis is placed in two exact physical analogies: the analogy based on inertial fields from the so-called "1+3 formalism", and the analogy based on tidal tensors. Both are reformulated, extended and generalized. We write in both formalisms the Maxwell and the full exact Einstein field equations with sources, plus the algebraic Bianchi identities, which are cast as the source-free equations for the gravitational field. New results within each approach are unveiled. The well known analogy between linearized gravity and electromagnetism in Lorentz frames is obtained as a limiting case of the exact ones. The formal analogies between the Maxwell and Weyl tensors are also discussed, and, together with insight from the other approaches, used to physically interpret gravitational radiation. The precise conditions under which a similarity between gravity and electromagnetism occurs are discussed, and we conclude by summarizing the main outcome of each approach.Comment: 60 pages, 2 figures. Improved version (compared to v2) with some re-write, notation improvements and a new figure that match the published version; expanded compared to the published version to include Secs. 2.3 and

Three little pieces for computer and relativity

Numerical relativity has made big strides over the last decade. A number of problems that have plagued the field for years have now been mostly solved. This progress has transformed numerical relativity into a powerful tool to explore fundamental problems in physics and astrophysics, and I present here three representative examples. These "three little pieces" reflect a personal choice and describe work that I am particularly familiar with. However, many more examples could be made.Comment: 42 pages, 11 figures. Plenary talk at "Relativity and Gravitation: 100 Years after Einstein in Prague", June 25 - 29, 2012, Prague, Czech Republic. To appear in the Proceedings (Edition Open Access). Collects results appeared in journal articles [72,73, 122-124