Pengaruh Schedule Flexibility Terhadap Turnover Intention Dengan Kepuasan Kerja Sebagai Variabel Perantara Di Surabaya Plaza Hotel

Penelitian ini dilakukan untuk menganalisa pengaruh schedule flexibility terhadap kepuasan kerja dan rendahnya turnover di Surabaya Plaza hotel. Schedule flexibility adalah kemudahan untuk mengatur jadwal kerja secara fleksibel yang dapat dibedakan menjadi kebijakan dalam menentukan berapa lama (time flexibility), kapan (timing flexibility), dan di mana (place flexibility) karyawan bekerja. Teknik analisa yang digunakan adalah kuantitatif kausal. Hasil penelitian menunjukkan schedule flexibility berpengaruh positif dan signifikan dengan kepuasan kerja, kepuasan kerja berpengaruh negatif dan signifikan terhadap turnover intention, begitu pula schedule flexibility terhadap kepuasan kerja yang berpengaruh negatif dan signifikan

Comparison of the Atomic Oxygen Erosion Depth and Cone Height of Various Materials at Hyperthermal Energy

Atomic oxygen readily reacts with most spacecraft polymer materials exposed to the low Earth orbital (LEO) environment. If the atomic oxygen arrival comes from a fixed angle of impact, the resulting erosion will foster the development of a change in surface morphology as material thickness decreases. Hydrocarbon and halopolymer materials, as well as graphite, are easily oxidized and textured by directed atomic oxygen in LEO at energies of approx.4.5 eV. What has been curious is that the ratio of cone height to erosion depth is quite different for different materials. The formation of cones under fixed direction atomic oxygen attack may contribute to a reduction in material tensile strength in excess of that which would occur if the cone height to erosion depth ratio was very low because of greater opportunities for crack initiation. In an effort to understand how material composition affects the ratio of cone height to erosion depth, an experimental investigation was conducted on 18 different materials exposed to a hyperthermal energy directed atomic oxygen source (approx.70 eV). The materials were first salt-sprayed to provide microscopic local areas that would be protected from atomic oxygen. This allowed erosion depth measurements to be made by scanning microscopy inspection. The polymers were then exposed to atomic oxygen produced by an end Hall ion source that was operated on pure oxygen. Samples were exposed to an atomic oxygen effective fluence of 1.0x10(exp 20) atoms/sq cm based on Kapton H polyimide erosion. The average erosion depth and average cone height were determined using field emission scanning electron microscopy (FESEM). The experimental ratio of average cone height to erosion depth is compared to polymer composition and other properties

Francisella tularensis Schu S4 lipopolysaccharide core sugar and o-antigen mutants are attenuated in a mouse model of tularemia

The virulence factors mediating Francisella pathogenesis are being investigated, with an emphasis on understanding how the organism evades innate immunity mechanisms. Francisella tularensis produces a lipopolysaccharide (LPS) that is essentially inert and a polysaccharide capsule that helps the organism to evade detection by components of innate immunity. Using an F. tularensis Schu S4 mutant library, we identified strains that are disrupted for capsule and O-antigen production. These serum-sensitive strains lack both capsule production and O-antigen laddering. Analysis of the predicted protein sequences for the disrupted genes (FTT1236 and FTT1238c) revealed similarity to those for waa (rfa) biosynthetic genes in other bacteria. Mass spectrometry further revealed that these proteins are involved in LPS core sugar biosynthesis and the ligation of O antigen to the LPS core sugars. The 50% lethal dose (LD(50)) values of these strains are increased 100- to 1,000-fold for mice. Histopathology revealed that the immune response to the F. tularensis mutant strains was significantly different from that observed with wild-type-infected mice. The lung tissue from mutant-infected mice had widespread necrotic debris, but the spleens lacked necrosis and displayed neutrophilia. In contrast, the lungs of wild-type-infected mice had nominal necrosis, but the spleens had widespread necrosis. These data indicate that murine death caused by wild-type strains occurs by a mechanism different from that by which the mutant strains kill mice. Mice immunized with these mutant strains displayed >10-fold protective effects against virulent type A F. tularensis challenge

Assessing the Performance of Cocoa and Oil-palm Production on Inclusive Growth in Nigeria

Over the years, cocoa and oil palm production have been one of the major market of export for International trade and a major source of economic growth in Nigeria. However,the production of cocoa and oil palm has been below expectation as a result of government diverting its attention to the oil and gas sector and consequent low attention in the agricultural sector. This study, therefore, examines the relationship between performance of cocoa and oil palm production on inclusive growth in Nigeria (1981- 2014). It employed Johansen co-integration test to determine the long run relationship between the performances of cocoa-oil palm production on inclusive growth in Nigeria, which is complemented with the Error Correction Mechanism (ECM). The results revealed that cocoa and oil palm production exact positive and significant effect on inclusive growth in both short and the long run. Thus, it is recommended that the Federal Government of Nigeria should invest in activities such as basic and applied agricultural research, agricultural extension and capacity building, irrigation development and agribusiness development that will promote agricultural production resulting in pro-poor growth

On the temperature dependence of multiple- and single-scattering contributions in magnetic EXAFS

We demonstrate that the temperature dependence of structural as well as magnetic fluctuations can be probed by the use of the Magnetic Extended X-ray Absorption Fine Structure (MEXAFS) spectroscopy. We compare those to the dynamic disorder as probed by the EXAFS. Here we present temperature-dependent MEXAFS investigations carried out at the L-edges of a thin Fe film and a Gd single crystal. By comparing the experimental results to ab initio calculations the single-scattering contributions are separated from multiple-scattering contributions. It is found that the multiple-scattering contributions are enhanced for the MEXAFS compared to the normal EXAFS

The Social context of motorcycle riding and the key determinants influencing rider behavior: A qualitative investigation

Objective: Given the increasing popularity of motorcycle riding and heightened risk of injury or death associated with being a rider, this study explored rider behaviour as a determinant of rider safety and, in particular, key beliefs and motivations which influence such behaviour. To enhance the effectiveness of future education and training interventions, it is important to understand riders’ own views about what influences how they ride. Specifically, this study sought to identify key determinants of riders’ behaviour in relation to the social context of riding including social and identity-related influences relating to the group (group norms and group identity) as well as the self (moral/personal norm and self-identity). ----- ----- Method: Qualitative research was undertaken via group discussions with motorcycle riders (n = 41). Results: The findings revealed that those in the group with which one rides represent an important source of social influence. Also, the motorcyclist (group) identity was associated with a range of beliefs, expectations, and behaviours considered to be normative. Exploration of the construct of personal norm revealed that riders were most cognizant of the “wrong things to do” when riding; among those issues raised was the importance of protective clothing (albeit for the protection of others and, in particular, pillion passengers). Finally, self-identity as a motorcyclist appeared to be important to a rider’s self-concept and was likely to influence their on-road behaviour. ----- ----- Conclusion: Overall, the insight provided by the current study may facilitate the development of interventions including rider training as well as public education and mass media messages. The findings suggest that these interventions should incorporate factors associated with the social nature of riding in order to best align it with some of the key beliefs and motivations underpinning riders’ on-road behaviours

Optical properties and charge-transfer excitations in edge-functionalized all-graphene nanojunctions

We investigate the optical properties of edge-functionalized graphene nanosystems, focusing on the formation of junctions and charge transfer excitons. We consider a class of graphene structures which combine the main electronic features of graphene with the wide tunability of large polycyclic aromatic hydrocarbons. By investigating prototypical ribbon-like systems, we show that, upon convenient choice of functional groups, low energy excitations with remarkable charge transfer character and large oscillator strength are obtained. These properties can be further modulated through an appropriate width variation, thus spanning a wide range in the low-energy region of the UV-Vis spectra. Our results are relevant in view of designing all-graphene optoelectronic nanodevices, which take advantage of the versatility of molecular functionalization, together with the stability and the electronic properties of graphene nanostructures.Comment: J. Phys. Chem. Lett. (2011), in pres

Designing all-graphene nanojunctions by covalent functionalization

We investigated theoretically the effect of covalent edge functionalization, with organic functional groups, on the electronic properties of graphene nanostructures and nano-junctions. Our analysis shows that functionalization can be designed to tune electron affinities and ionization potentials of graphene flakes, and to control the energy alignment of frontier orbitals in nanometer-wide graphene junctions. The stability of the proposed mechanism is discussed with respect to the functional groups, their number as well as the width of graphene nanostructures. The results of our work indicate that different level alignments can be obtained and engineered in order to realize stable all-graphene nanodevices