Determination of the activation energies of beef tallow and crude glycerin combustion using thermogravimetry

The present study deals with the determination of the activation energy for the thermal decomposition of two renewable fuels crude glycerin and beef tallow. The activation energies were investigated by using a thermogravimetric analyzer (TGA) in the temperature range of 25-600 degrees C in atmosphere of synthetic air. The TG curves of the thermal decomposition process of both samples were divided into several phases and the second, called PH2, was chosen for the kinetic study because it is associated with the combustion ignition. Differential Thermal Analysis (DTA) showed an endothermic event at the PH2 region for the crude glycerin corresponding to devolatilization, while for beef tallow, this step presented an exothermic event, called LTO (low-temperature oxidation), which is correlated with devolatilization followed by combustion. For the entire PH2, activation energy values for crude glycerin were between 90 kJ mol(-1) and 42 kJ mol(-1), while for the beef tallow they ranged from 50 kJ mol(-1) to 113 kJ mol (1). The activation energy values obtained at the pre-ignition stage - conversion between 0 and 0.45 - showed that the crude glycerin with higher values requires an additional energetic support at the start of combustion processes and the beef tallow ignites more easily, presenting lower values. According to the Wolfer's equation, a direct relation between the activation energy and the ignition delay is established and the results of this study provides useful data for the development and design of new combustion chambers and engines when non-traditional fuels are used as feedstock. (C) 2012 Elsevier Ltd. All rights reserved.CAPESCAPES [PNPD 0034088, BEX 1149/10-5]FAPESPFAPESP [2011/00183-2, 2011/11321-7

Physical-chemical characterization of biomass samples for application iin pyrolysis process

The use of lignocellulosic biomass as an energy source has considerably increased. Due to the diverse natures of biomass materials, their properties widely range and exhibit different behaviors in thermal processes. The most important properties that provide information about a fuel are heating values, ash composition, proximate (determination of moisture, ash, volatile and fixed carbon content), and ultimate analysis (C, H, N, S and O composition). Moreover, the kinetic study of the thermal behavior of a fuel can be useful for the understanding of the complex decomposition process of each material. This study focuses on the physical-chemical characterization of six lignocellulosic biomasses, namely coffee husk, tucumã seed, sugar cane bagasse, peanut shell, rice husk and pine sawdust, widely available in Brazil. A thermogravimetric analyzer was used to study their decomposition behavior in a pyrolytic environment. Non-isothermal thermogravimetric data were used and the application of a model-free isoconversional method enabled the evaluation of the activation energy (Ea) of the biofuels. The curves also show that the behavior during thermal decomposition varies from one biomass to another and these differences imply the importance of a comprehensive characterization study of fuels for the development and optimization of reactors. The knowledge on biomass properties enables the prediction of environmental impacts and technical aspects related to thermal processes. Therefore, thermal decomposition behavior is a consequence of the feedstock physical-chemical characteristic, which also provides valuable information regarding features of the complex reactions that occur throughout the pyrolysis of the biomass.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Study of thermal decomposition of ignition temperature of bagasse, coal and their blends

In Brazil, due to its availability, sugar cane bagasse has a high potential for power generation. The knowledge of ignition behavior, as well as the knowledge of the chemical kinetics, in of fuels combustion process is important features in boilers projects and in the stability of the combustion process control. The aim of this study is to investigate the thermal behavior of sugar cane bagasse, coal and their blends. The methodology proposed by Tognotti et al. (1985) was applied to determine the ignition temperature for all samples. Ignition temperatures were 256oC for neat bagasse and 427oC for neat coal, and 275oC for both blends (50-50% and 25-75%). The ModelFree Kinetics was applied to determine the apparent activation energy (Eα) of the thermal decomposition of sugar cane bagasse. For the two major events of mass loss of bagasse which correspond to the thermal decomposition of organic matter (mainly hemicellulose, cellulose and lignin), average values of Eα were obtained for both combustion and pyrolysis processes. In synthetic air atmosphere, the Eα were 170.8±26.3 kJ⋅mol-1 and 277.8±58.6 kJ⋅mol-1, while in nitrogen atmosphere, the Eα were 185.0 ± 11.4 kJ⋅mol-1 and 82.1±44.4 kJ⋅mol-1. The results obtained can be explained by synergistic effects when both bagasse and coal were blended, changing the fuel reactivity

The calcium looping cycle study for capturing carbon dioxide applied to the energy generation

The calcium looping process (Ca-L) is a promising technology to reduce of the carbon dioxide (CO2) emissions when applied in energy generation systems. Ca-based materials (usually limestone) are used in this process as CO2 sorbents. Thus, the CO2 capture occurs by the reversible reaction between calcium oxide (CaO) and CO2, resulting in the calcium carbonate form (CaCO3). Compared to other technologies applied to carbon sequestration process, the Ca-L offers additional advantages such: the use of fluidized bed technology that is already well established; this process occurs at high temperature, and the excess of heat generated can be recovered; the cost of limestone sorbents is low because of its wide availability. However, in the applying the Ca-L process is essential to understand the mechanism and the effect of partial pressure of CO2 in both, calcination and carbonation processes; to investigate the effect of sintering and to evaluate the sorbent activity decay. In this paper, empirical technique such as thermogravimetry is applied to investigate the reactivity of dolomite as CO2 sorbent. The effect of CO2 high concentrations in both calcination/carbonation processes is also investigated.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Correlation Between Apparent Activation Energy and NOx emission of renewable diesel from sugar cane, biodiesel, fossil diesel and their blends

Biofuels and their blends with fossil fuel are important energy resources, which production and application have been largely increased internationally. This study focus on the development of a correlation between apparent activation energy (Ea) and NOx emission of the thermal decomposition of three pure fuels: farnasane (renewable diesel from sugar cane), biodiesel and fossil diesel and their blends. Apparent Activation energy was determined by using thermogravimetry and Model-Free Kinetics. NOx emission was obtained from the European Stationary Cycle (ESC) with OM 926LA CONAMA P7/Euro 5 engine. Results showed that there is a linear correlation between apparent activation energy and NOx emission with R2 of 0,9667 considering pure fuels and their blends which is given as: NOx = 2,2514Ea - 96,309. The average absolute error of this correlation is 2.96% with respect to the measured NOx value. The main advantage of this correlation is its capability to predict NOx emission when either a new pure fuel or a blend of fuels is proposed to use in enginees