1,698 research outputs found
HIGH-ENERGY CYCLOTRONS WITHOUT SPIRAL
Abstract This paper explores the possibility of reaching high energies in isochronous ring cyclotrons with radial sectors by using negative valley fields to increase the magnetic flutter. A simple model was used to generate field maps for 4-GeV and 13-GeV proton rings, whose orbit properties were then studied using the CYCLOPS equilibrium orbit code. Field maps were also generated for two FFAG designs (both non-scaling, one isochronous and one not) and their orbit properties evaluated with CYCLOPS -the first time that a cyclotron code has been used on FFAGs
Momentum Cleaning in the CERN LHC
This paper describes the optimization of the optics and the collimator geometry for the momentum cleaning insertion of the LHC. To collimate the off-momentum secondary halo without disturbing the circ ulating beam, the normalized dispersion in IR3 is made as large as in the arcs. The jaw locations and orientations are numerically optimized to reduce the momentum-dependent halo amplitude. The second ary halo is kept within the available aperture for momentum deviations up to 0.44%, where the horizontal aperture is 4\sigma\ on-momentum
Initial error analysis for the LHC collimation insertion
The two cleaning insertions in the LHC, for betatron and momentum collimation, are optimized for an ideal lattice and collimator jaw setup. We have studied a collimation beam line with randomly generated jaw misalignments and quadrupole field and alignment errors, the resultant distortion of the reference orbit being corrected with the help of monitors placed near critical collimators. Different closed orbit errors and beam shapes are considered at the entrance. We report the level of errors for which no corrections are needed and the level for which corrections are not possible
Numerical Optimization of Collimator Jaw Orientations and Locations in the LHC
The collimation system of LHC will consist of flat collimator jaws distributed along the IR7 lattice with the aim of limiting the maximum combined amplitudes of secondary halo particles (born along the edges of the primary collimators). The code DJ (Distribution of Jaws) computes this amplitude using a quasi-analytic algorithm (no tracking), by which the maximum initial angles are found, corresponding to trajectories escaping all secondary jaws. We report the latest version of DJ, which contains the following enhancements: (1) the orientation of each pair of jaws is a free variable (instead of using only vertical, horizontal, or 45 degrees skew jaws); (2) the minimizing method used is "simulated annealing", which, for our case of a discontinuous function of up to 32 variables, always finds a global minimum. Different initial jaw distributions lead to different final ones, but they all give essentially the same maximum halo amplitude; this seems to depend only on the number of jaws and the lattice parameters, particularly the tune-split. We discuss lattice characteristics found favorable for collimation
Optimization of Collimator Jaw Locations for the LHC
A highly effective collimation scheme is required in the LHC to limit heating of the vacuum chamber and superconducting magnets by protons either uncaptured at injection or scattered from the collision points. The proposed system would consist of one set of primary collimators followed by three sets of secondary collimators downstream to clean up protons scattered from the primaries. Each set of collimators would consist of four pairs of jaws - horizontal, vertical, and 45 o and 135 o skew. A study is reported of the optimization of the longitudinal positions of these jaws with the aim of minimizing the maximum betatron amplitudes of protons surviving the collimation system. This is performed using an analytical representation of the action of the jaws and is confirmed by tracking. Significant improvement can be obtained by omitting inactive jaws and adding skew jaws
Optics Solutions for the Collimation Insertion of LHC
While the two collimation insertions in the LHC must have similar basic layouts and match to almost identical dispersion suppressors to respect the geometry of the existing tunnel, their different roles impose opposite requirements on the normalized dispersion within them. For betatron collimation it must be near zero, while for momentum collimation it must have a peak at the location of the primary collimator, immediately after the dispersion suppressor. The insertion lattice solution found for the latter case requires up to 30% asymmetry in the quadrupole gradients (in line with the current trend in LHC lattice development to break the exact antisymmetry within insertions). To achieve this using twin-aperture warm quadrupoles, the modules making up each quadrupole will be wired in such a way that the two beams still see the same sequence of focusing fields. We describe the optimum setup, exibility and collimation quality for the two insertions
Excavation at Aguas Buenas, Robinson Crusoe Island, Chile, of a gunpowder magazine and the supposed campsite of Alexander Selkirk, together with an account of early navigational dividers
Excavations were undertaken of a ruined building at Aguas Buenas, identified as an 18th-century Spanish gunpowder magazine. Evidence was also found for the campsite of an early European occupant of the island. A case is made that this was Alexander Selkirk, a castaway here from 1704 to 1709. Selkirk was the model for Defoe’s Robinson Crusoe. A detailed discussion is given of a fragment of copper alloy identifi ed as being from a pair of navigational dividers
The bipolar disorder risk allele at CACNA1C also confers risk of recurrent major depression and of schizophrenia
Molecular genetic analysis offers opportunities to advance our understanding of the nosological relationship between psychiatric diagnostic categories in general, and the mood and psychotic disorders in particular. Strong evidence (P=7.0 × 10−7) of association at the polymorphism rs1006737 (within CACNA1C, the gene encoding the α-1C subunit of the L-type voltage-gated calcium channel) with the risk of bipolar disorder (BD) has recently been reported in a meta-analysis of three genome-wide association studies of BD, including our BD sample (N=1868) studied within the Wellcome Trust Case Control Consortium. Here, we have used our UK case samples of recurrent major depression (N=1196) and schizophrenia (N=479) and UK non-psychiatric comparison groups (N=15316) to examine the spectrum of phenotypic effect of the bipolar risk allele at rs1006737. We found that the risk allele conferred increased risk for schizophrenia (P=0.034) and recurrent major depression (P=0.013) with similar effect sizes to those previously observed in BD (allelic odds ratio ∼1.15). Our findings are evidence of some degree of overlap in the biological underpinnings of susceptibility to mental illness across the clinical spectrum of mood and psychotic disorders, and show that at least some loci can have a relatively general effect on susceptibility to diagnostic categories, as currently defined. Our findings will contribute to a better understanding of the pathogenesis of major psychiatric illness, and such knowledge should be useful in providing an etiological rationale for shaping psychiatric nosology, which is currently reliant entirely on descriptive clinical data
Results on Plasma Focusing of High Energy Density Electron and Positron Beams
We present results from the SLAC E-150 experiment on plasma focusing of high
energy density electron and, for the first time, positron beams. We also
discuss measurements on plasma lens-induced synchrotron radiation, longitudinal
dynamics of plasma focusing, and laser- and beam-plasma interactions.Comment: LINAC 2000 paper No. THC13, Monterey, CA. Aug.21-25,2000, 3 pages, 2
figure
A magnetically-driven piston pump for ultra-clean applications
A magnetically driven piston pump for xenon gas recirculation is presented.
The pump is designed to satisfy extreme purity and containment requirements, as
is appropriate for the recirculation of isotopically enriched xenon through the
purification system and large liquid xenon TPC of EXO-200. The pump, using
sprung polymer gaskets, is capable of pumping more than 16 standard liters per
minute (SLPM) of xenon gas with 750 torr differential pressure.Comment: 6 pages, 5 figure
- …