20,433 research outputs found
Dynamics of trusses having nonlinear joints
The transient analysis of trusses having nonlinear joints can be accomplished using the residual force technique. The technique was applied a two degree of freedom spring mass system, a four bay planar truss, and an actual ten bay deployable truss. Joints chosen for analysis were the nonlinear gap joints and the linear Voigt joints. Results from the nonlinear gap analyses generally indicate that coupling between the modes can display some interesting effects during free vibration. One particularly interesting effect was that the damping of the structure appeared to be higher than could be accounted for from modal damping alone. Energy transferral from the lower to the higher modes was found to exist as a result of the modal coupling. The apparently increased damping was due to the fact that the energy transferred to the higher modes is inherently dissipated more quickly. Another interesting phenomenon was that the lower modes could drive the higher modes even during free vibration and that these modes could display a rather large quasi-steady state behavior even when modal damping was present. Gaps were also found to increase the amplitude and period of the free vibration response as expected
The impact of space and space-related activities on a local economy. a case study of boulder, colorado. part i- the input-output analysis
Impact of space and space-related activities on industry and general economy of Boulder, Colorad
Real-Time Cavity QED with Single Atoms
The combination of cold atoms and large coherent coupling enables investigations in a new regime in cavity QED with single-atom trajectories monitored in real time with high signal-to-noise ratio. The underlying “vacuum-Rabi” splitting is clearly reflected in the frequency dependence of atomic transit signals recorded atom by atom, with evidence for mechanical light forces for intracavity photon number <1. The nonlinear optical response of one atom in a cavity is observed to be in accord with the one-atom quantum theory but at variance with semiclassical predictions
Some gamma-ray shielding measurements made at altitudes greater than 115000 feet using large Ge(Li) detectors
A series of balloon-flight experiments at altitudes greater than 115,000 feet were conducted to gain information relative to the use of composite shields (passive and/or active) for shielding large-volume, lithium-drifted, germanium (Ge(Li)) detectors used in gamma-ray spectrometers. Data showing the pulse-height spectra of the environmental gamma radiation as measured at 5.3 and 3.8 gms sq cm residual atmosphere with an unshielded diode detector are also presented
Real-time cavity QED with single atoms
We report the first measurement of the real-time evolution of the complex field amplitude brought on by single atom transits. We show the variation in time of both quadrature amplitudes (simultaneously recorded) of the light transmitted through the cavity, as well the resultant optical phase for a single atom transit event. In this particular measurement, the cavity and laser were both detuned by 10 MHz from the Cs resonance
Multi-Spacecraft Measurement of Turbulence within a Magnetic Reconnection Jet
The relationship between magnetic reconnection and plasma turbulence is
investigated using multipoint in-situ measurements from the Cluster spacecraft
within a high-speed reconnection jet in the terrestrial magnetotail. We show
explicitly that work done by electromagnetic fields on the particles,
, has a non-Gaussian distribution and is
concentrated in regions of high electric current density. Hence, magnetic
energy is converted to kinetic energy in an intermittent manner. Furthermore,
we find the higher-order statistics of magnetic field fluctuations generated by
reconnection are characterized by multifractal scaling on magnetofluid scales
and non-Gaussian global scale invariance on kinetic scales. These observations
suggest within the reconnection jet has an analogue
in fluid-like turbulence theory in that it proceeds via coherent structures
generated by an intermittent cascade. This supports the hypothesis that
turbulent dissipation is highly nonuniform, and thus these results could have
far reaching implications for space and astrophysical plasmas.Comment: 5 pages, 3 figures, submitted to Physical Review Letter
Systematic review of the current status of cadaveric simulation for surgical training
Background:
There is growing interest in and provision of cadaveric simulation courses for surgical trainees. This is being driven by the need to modernize and improve the efficiency of surgical training within the current challenging training climate. The objective of this systematic review is to describe and evaluate the evidence for cadaveric simulation in postgraduate surgical training.
Methods:
A PRISMA‐compliant systematic literature review of studies that prospectively evaluated a cadaveric simulation training intervention for surgical trainees was undertaken. All relevant databases and trial registries were searched to January 2019. Methodological rigour was assessed using the widely validated Medical Education Research Quality Index (MERSQI) tool.
Results:
A total of 51 studies were included, involving 2002 surgical trainees across 69 cadaveric training interventions. Of these, 22 assessed the impact of the cadaveric training intervention using only subjective measures, five measured impact by change in learner knowledge, and 23 used objective tools to assess change in learner behaviour after training. Only one study assessed patient outcome and demonstrated transfer of skill from the simulated environment to the workplace. Of the included studies, 67 per cent had weak methodology (MERSQI score less than 10·7).
Conclusion:
There is an abundance of relatively low‐quality evidence showing that cadaveric simulation induces short‐term skill acquisition as measured by objective means. There is currently a lack of evidence of skill retention, and of transfer of skills following training into the live operating theatre
Use of extended and prepared reference objects in experimental Fourier transform X-ray holography
The use of one or more gold nanoballs as reference objects for Fourier
Transform holography (FTH) is analysed using experimental soft X-ray
diffraction from objects consisting of separated clusters of these balls. The
holograms are deconvoluted against ball reference objects to invert to images,
in combination with a Wiener filter to control noise. A resolution of ~30nm,
smaller than one ball, is obtained even if a large cluster of balls is used as
the reference, giving the best resolution yet obtained by X-ray FTH. Methods of
dealing with missing data due to a beamstop are discussed. Practical prepared
objects which satisfy the FTH condition are suggested, and methods of forming
them described.Comment: 7 pages, 2 figures, submitted to Applied Physics Letter
Macroscopic control parameter for avalanche models for bursty transport
Similarity analysis is used to identify the control parameter RA for the subset of avalanching systems that can exhibit self-organized criticality (SOC). This parameter expresses the ratio of driving to dissipation. The transition to SOC, when the number of excited degrees of freedom is maximal, is found to occur when RA-->0. This is in the opposite sense to (Kolmogorov) turbulence, thus identifying a deep distinction between turbulence and SOC and suggesting an observable property that could distinguish them. A corollary of this similarity analysis is that SOC phenomenology, that is, power law scaling of avalanches, can persist for finite RA with the same RA-->0 exponent if the system supports a sufficiently large range of lengthscales, necessary for SOC to be a candidate for physical (RA finite) systems
- …