6,976 research outputs found
Adaptive Signal Processing Strategy for a Wind Farm System Fault Accommodation
In order to improve the availability of offshore wind farms, thus avoiding unplanned operation and maintenance costs, which can be high for offshore installations, the accommodation of faults in their earlier occurrence is fundamental. This paper addresses the design of an active fault tolerant control scheme that is applied to a wind park benchmark of nine wind turbines, based on their nonlinear models, as well as the wind and interactions between the wind turbines in the wind farm. Note that, due to the structure of the system and its control strategy, it can be considered as a fault tolerant cooperative control problem of an autonomous plant. The controller accommodation scheme provides the on-line estimate of the fault signals generated by nonlinear filters exploiting the nonlinear geometric approach to obtain estimates decoupled from both model uncertainty and the interactions among the turbines. This paper proposes also a data-driven approach to provide these disturbance terms in analytical forms, which are subsequently used for designing the nonlinear filters for fault estimation. This feature of the work, followed by the simpler solution relying on a data-driven approach, can represent the key point when on-line implementations are considered for a viable application of the proposed scheme
Robust control examples applied to a wind turbine simulated model
Wind turbine plants are complex dynamic and uncertain processes driven by stochastic inputs and disturbances, as well as different loads represented by gyroscopic, centrifugal and gravitational forces. Moreover, as their aerodynamic models are nonlinear, both modeling and control become challenging problems. On the one hand, high-fidelity simulators should contain different parameters and variables in order to accurately describe the main dynamic system behavior. Therefore, the development of modeling and control for wind turbine systems should consider these complexity aspects. On the other hand, these control solutions have to include the main wind turbine dynamic characteristics without becoming too complicated. The main point of this paper is thus to provide two practical examples of the development of robust control strategies when applied to a simulated wind turbine plant. Extended simulations with the wind turbine benchmark model and the Monte Carlo tool represent the instruments for assessing the robustness and reliability aspects of the developed control methodologies when the model-reality mismatch and measurement errors are also considered. Advantages and drawbacks of these regulation methods are also highlighted with respect to different control strategies via proper performance metrics.Wind turbine plants are complex dynamic and uncertain processes driven by stochastic inputs and disturbances, as well as different loads represented by gyroscopic, centrifugal and gravitational forces. Moreover, as their aerodynamic models are nonlinear, both modeling and control become challenging problems. On the one hand, high-fidelity simulators should contain different parameters and variables in order to accurately describe the main dynamic system behavior. Therefore, the development of modeling and control for wind turbine systems should consider these complexity aspects. On the other hand, these control solutions have to include the main wind turbine dynamic characteristics without becoming too complicated. The main point of this paper is thus to provide two practical examples of the development of robust control strategies when applied to a simulated wind turbine plant. Extended simulations with the wind turbine benchmark model and the Monte Carlo tool represent the instruments for assessing the robustness and reliability aspects of the developed control methodologies when the model-reality mismatch and measurement errors are also considered. Advantages and drawbacks of these regulation methods are also highlighted with respect to different control strategies via proper performance metrics
Wind turbine simulator fault diagnosis via fuzzy modelling and identification techniques
For improving the safety and the reliability of wind turbine installations, the earliest and fastest fault detection and isolation are highly required, since it could be used also for accommodation purpose. Modern wind turbines consist of several important subsystems, which can be affected by malfunctions regarding actuators, sensors, and components. From the turbine control point-of-view they are extremely important since provide the actuation signals, the main functions, as well as the measurements. In this paper, a fault diagnosis scheme based on the identification of fuzzy models is described, in order to detect and isolate these faults in the most efficient way, in order also to improve the energy cost, the production rate, and reduce the operation and maintenance operations. Fuzzy systems are proposed here since the model under investigation is nonlinear, whilst the wind speed measurement is uncertain since it depends on the rotor plane wind turbulence effects. These fuzzy models are described as Takagi-Sugeno prototypes, whose parameters are estimated from the wind turbine measurements. The fault diagnosis methodology is thus developed using these fuzzy models, which are exploited as residual generators. The wind turbine simulator is finally employed for the validation of the obtained performances.For improving the safety and the reliability of wind turbine installations, the earliest and fastest fault detection and isolation is highly
required, since it could be used also for accommodation purpose. Modern wind turbines consist of several important subsystems,
which can be affected by malfunctions regarding actuators, sensors, and components. From the turbine control point–of–view they
are extremely important since provide the actuation signals, the main functions, as well as the measurements. In this paper, a fault
diagnosis scheme based on the identification of fuzzy models is described, in order to detect and isolated these faults in the most
efficient way, in order also to improve the energy cost, the production rate, and reduce the operation and maintenance operations.
Fuzzy systems are proposed here since the model under investigation is nonlinear, whilst the wind speed measurement is uncertain
since it depends on the rotor plane wind turbulence effects. These fuzzy models are described as Takagi–Sugeno prototypes, whose
parameters are estimated from the wind turbine measurements. The fault diagnosis methodology is thus developed using these
fuzzy models, which are exploited as residual generators. The wind turbine simulator is finally employed for the validation of the
obtained performances
Data-driven fault diagnosis of awind farm benchmark model
The fault diagnosis of wind farms has been proven to be a challenging task, and motivates the research activities carried out through this work. Therefore, this paper deals with the fault diagnosis of a wind park benchmark model, and it considers viable solutions to the problem of earlier fault detection and isolation. The design of the fault indicator involves data-driven approaches, as they can represent effective tools for coping with poor analytical knowledge of the system dynamics, noise, uncertainty, and disturbances. In particular, the proposed data-driven solutions rely on fuzzy models and neural networks that are used to describe the strongly nonlinear relationships between measurement and faults. The chosen architectures rely on nonlinear autoregressive with exogenous input models, as they can represent the dynamic evolution of the system over time. The developed fault diagnosis schemes are tested by means of a high-fidelity benchmark model that simulates the normal and the faulty behaviour of a wind farm installation. The achieved performances are also compared with those of a model-based approach relying on nonlinear differential geometry tools. Finally, a Monte-Carlo analysis validates the robustness and reliability of the proposed solutions against typical parameter uncertainties and disturbances.The fault diagnosis of wind farms has been proven to be a challenging task, and motivates the research activities carried out through this work. Therefore, this paper deals with the fault diagnosis of a wind park benchmark model, and it considers viable solutions to the problem of earlier fault detection and isolation. The design of the fault indicator involves data-driven approaches, as they can represent effective tools for coping with poor analytical knowledge of the system dynamics, noise, uncertainty, and disturbances. In particular, the proposed data-driven solutions rely on fuzzy models and neural networks that are used to describe the strongly nonlinear relationships between measurement and faults. The chosen architectures rely on nonlinear autoregressive with exogenous input models, as they can represent the dynamic evolution of the system over time. The developed fault diagnosis schemes are tested by means of a high-fidelity benchmark model that simulates the normal and the faulty behaviour of a wind farm installation. The achieved performances are also compared with those of a model-based approach relying on nonlinear differential geometry tools. Finally, a Monte-Carlo analysis validates the robustness and reliability of the proposed solutions against typical parameter uncertainties and disturbances
Data-driven techniques for the fault diagnosis of a wind turbine benchmark
This paper deals with the fault diagnosis of wind turbines and investigates viable solutions to the problem of earlier fault detection and isolation. The design of the fault indicator, i.e., the fault estimate, involves data-driven approaches, as they can represent effective tools for coping with poor analytical knowledge of the system dynamics, together with noise and disturbances. In particular, the proposed data-driven solutions rely on fuzzy systems and neural networks that are used to describe the strongly nonlinear relationships between measurement and faults. The chosen architectures rely on nonlinear autoregressive models with exogenous input, as they can represent the dynamic evolution of the system along time. The developed fault diagnosis schemes are tested by means of a high-fidelity benchmark model that simulates the normal and the faulty behaviour of a wind turbine. The achieved performances are also compared with those of other model-based strategies from the related literature. Finally, a Monte-Carlo analysis validates the robustness and the reliability of the proposed solutions against typical parameter uncertainties and disturbances.This paper deals with the fault diagnosis of wind turbines and investigates viable solutions to the problem of earlier fault detection and isolation. The design of the fault indicator, i.e., the fault estimate, involves data-driven approaches, as they can represent effective tools for coping with poor analytical knowledge of the system dynamics, together with noise and disturbances. In particular, the proposed data-driven solutions rely on fuzzy systems and neural networks that are used to describe the strongly nonlinear relationships between measurement and faults. The chosen architectures rely on nonlinear autoregressive models with exogenous input, as they can represent the dynamic evolution of the system along time. The developed fault diagnosis schemes are tested by means of a high-fidelity benchmark model that simulates the normal and the faulty behaviour of a wind turbine. The achieved performances are also compared with those of other model-based strategies from the related literature. Finally, a Monte-Carlo analysis validates the robustness and the reliability of the proposed solutions against typical parameter uncertainties and disturbances
Design and Performance Evaluation of Residual Generators for the FDI of an Aircraft
In this work, several procedures for the fault detection and isolation (FDI) on general aviation aircraft sensors are presented.
In order to provide a comprehensive wide–spectrum treatment, both linear and nonlinear, model–based and data–driven methodologies
are considered. The main contributions of the paper are related to the development of both FDI polynomial method (PM) and FDI
scheme based on the nonLinear geometric approach (NLGA). As to the PM, the obtained results highlight a good trade–off between
solution complexity and resulting performances. Moreover, the proposed PM is especially useful when robust solutions are required
for minimising the effects of modelling errors and noise, while maximising fault sensitivity. As to the NLGA, the proposed work is
the first development and robust application of the NLGA to an aircraft model in flight conditions characterised by tight–coupled
longitudinal and lateral dynamics. In order to verify the robustness of the residual generators related to the previous FDI techniques,
the simulation results adopt a typical aircraft reference trajectory embedding several steady–state flight conditions, such as straight
flight phases and coordinated turns. Moreover, the simulations are performed in the presence of both measurement and modelling
errors. Finally, extensive simulations are used for assessing the overall capabilities of the developed FDI schemes and a comparison
with neural networks (NN) and unknown input Kalman filter (UIKF) diagnosis methods is performed
Actuator Fault Reconstruction via Dynamic Neural Networks for an Autonomous Underwater Vehicle Model
This paper proposes the development of a scheme for the fault diagnosis of the actuators of a simulated model accurately representing the behaviour of an autonomous underwater vehicle. The Fossen model usually adopted to describe the dynamics of the underwater vehicle has been generalised in this paper to take into account time-varying sea currents. The proposed fault detection and isolation strategy uses a data-driven approach relying on multi-layer perceptron neural networks that include auto-regressive exogenous prototypes that provide the fault reconstruction. These tools are thus exploited to design a bank of dynamic neural networks for residual generation that are trained on the basis of the input and outputmeasurements acquired from the simulator. In this work, the residuals are designed to represent the reconstruction of the fault signals themselves. Moreover, the neural network bank is also able to perform the isolation task, in case of simultaneous and concurrent faults affecting the actuators. The paper firstly describes the steps performed for deriving the proposed fault diagnosis solution. Secondly, the effectiveness of the scheme is demonstrated by means of high-fidelity simulations of a realistic autonomous underwater vehicle, in the presence of faults and marine current
Fast saccadic eye-movements in humans suggest that numerosity perception is automatic and direct
Fast saccades are rapid automatic oculomotor responses to salient and ecologically important visual stimuli such as animals and faces. Discriminating the number of friends, foe, or prey may also have an evolutionary advantage. In this study, participants were asked to saccade rapidly towards the more numerous of two arrays. Participants could discriminate numerosities with high accuracy and great speed, as fast as 190 ms. Intermediate numerosities were more likely to elicit fast saccades than very low or very high numerosities. Reaction-times for vocal responses (collected in a separate experiment) were slower, did not depend on numerical range, and correlated only with the slow not the fast saccades, pointing to different systems. The short saccadic reaction-times we observe are surprising given that discrimination using numerosity estimation is thought to require a relatively complex neural circuit, with several relays of information through the parietal and prefrontal cortex. Our results suggest that fast numerosity-driven saccades may be generated on a single feed-forward pass of information recruiting a primitive system that cuts through the cortical hierarchy and rapidly transforms the numerosity information into a saccade command
Robust Attitude Control of an Agile Aircraft Using Improved Q-Learning
Attitude control of a novel regional truss-braced wing (TBW) aircraft with low stability characteristics is addressed in this paper using Reinforcement Learning (RL). In recent years, RL has been increasingly employed in challenging applications, particularly, autonomous flight control. However, a significant predicament confronting discrete RL algorithms is the dimension limitation of the state-action table and difficulties in defining the elements of the RL environment. To address these issues, in this paper, a detailed mathematical model of the mentioned aircraft is first developed to shape an RL environment. Subsequently, Q-learning, the most prevalent discrete RL algorithm, will be implemented in both the Markov Decision Process (MDP) and Partially Observable Markov Decision Process (POMDP) frameworks to control the longitudinal mode of the proposed aircraft. In order to eliminate residual fluctuations that are a consequence of discrete action selection, and simultaneously track variable pitch angles, a Fuzzy Action Assignment (FAA) method is proposed to generate continuous control commands using the trained optimal Q-table. Accordingly, it will be proved that by defining a comprehensive reward function based on dynamic behavior considerations, along with observing all crucial states (equivalent to satisfying the Markov Property), the air vehicle would be capable of tracking the desired attitude in the presence of different uncertain dynamics including measurement noises, atmospheric disturbances, actuator faults, and model uncertainties where the performance of the introduced control system surpasses a well-tuned Proportional–Integral–Derivative (PID) controller
- …