378 research outputs found
The Latin Leaflet, Number 29
Polymer electrolytes represent the ultimate in terms of desirable properties of energy storage/conversion devices, as they can offer an all-solid-state construction, a wide variety of shapes and sizes, light-weight, low costs, high energy density and safety.
Here we present our recent results concerning a novel strategy for preparing efficient polymer membranes which are successfully demonstrated as suitable electrolytes for several energy conversion and storage devices (i.e., Li- and Na-based batteries and DSSCs). Highly ionic conducting polymer electrolytes containing PEO-based functionalities and different components (e.g., Li/Na salts, RTILs, natural biosourced and cellulosic fillers) are successfully prepared via a rapid process and, directly or subsequently, cross-linked via UV irradiation (patent pending, PCT/IT2014/000008). All the prepared materials are thoroughly characterised in terms of their physical, chemical and morphological properties and tested for their electrochemical performances and durability. The UV-curing process on such materials led to the production of elastic and resistant amorphous macromolecular networks. Noticeably increased ionic conductivities are registered (10-3 S cm-1 at RT), along with very stable interfacial and storage stability and wide electrochemical stability windows. The different lab-scale solid-state devices show remarkable performances even at ambient temperature, at the level of those using liquid electrolytes, respect to which demonstrate much greater durability and safety.
The obtained findings demonstrate a new, easy and low cost approach to fabricate and tailor-make polymer electrolytes with highly promising prospects for the next generation of advanced flexible energy production and storage devices
Sustainable electrochemistry - Functional applied materials and techniques for energy devices and sensing (GEI 2018): Foreword
In this Virtual Special Issue of Electrochimica Acta, we gather a selection of scientific research articles corresponding to contributions presented at the Italian Electrochemistry Days (Giornate dell'Elettrochimica Italiana) Edition 2018 â GEI 2018, the yearly event that gathers the national electrochemical community, which was held at the Olympic Village Hotel in Sestriere (Torino), built for the 2006 Winter Games, with panoramic views toward one of the most famous Europe's skiing resorts on the mountains of the north-west side of Italy
Carrier mobility and scattering lifetime in electric double-layer gated few-layer graphene
We fabricate electric double-layer field-effect transistor (EDL-FET) devices
on mechanically exfoliated few-layer graphene. We exploit the large capacitance
of a polymeric electrolyte to study the transport properties of three, four and
five-layer samples under a large induced surface charge density both above and
below the glass transition temperature of the polymer. We find that the carrier
mobility shows a strong asymmetry between the hole and electron doping regime.
We then employ ab-initio density functional theory (DFT) calculations to
determine the average scattering lifetime from the experimental data. We
explain its peculiar dependence on the carrier density in terms of the specific
properties of the electrolyte we used in our experiments.Comment: 6 pages, 3 figure
On the impact of electrolyte temperature on contact glow discharge electrolysis
This study aims at disclosing the effect of small temperature drops (10-15 degrees C) of the electrolyte on Contact Glow Discharge Electrolysis (CGDE). In our experiments, we measure the temperature change of electrolyte and electrode as well as the change in current following on from the addition of, first, frozen and, second, boiling KOH aqueous solution (0.1 M). Quite surprisingly, only the addition of frozen KOH aqueous solution has a significant impact on current (+130%), caused by the decrease in electrolyte temperature (-11 degrees C). In contrast, the addition of boiling KOH aqueous solution has a negligible effect on current. A very similar behavior is recorded when frozen or boiling type III deionized water is used: the addition of ice has an even stronger impact on current (+145 %) and on electrolyte temperature (-14 degrees C), while adding boiling water has no measurable effect. Thus, we here demonstrated that electrolyte temperature is critical for managing the responsiveness of the CGDE system. Our results pave the way toward temperature controlled CGDE, a powerful tool for a greener and a more efficient environmental chemistry
Mesoporous Si and multi-layered Si/C films by Pulsed Laser Deposition as Li-ion microbattery anodes
Silicon is a very attractive Li-ion battery anode material due to its high theoretical capacity, but proper nanostructuring is needed to accommodate the large volume expansion/shrinkage upon reversible cycling. Hereby, novel mesoporous Si nanostructures are grown at room temperature by simple and rapid Pulsed Laser Deposition (PLD) directly on top of the Cu current collector surface. The samples are characterised from the structural/morphological viewpoint and their promising electrochemical behaviour demonstrated in lab-scale lithium cells. Depending on the porosity, easily tuneable by PLD, specific capacities approaching 250 ÎŒAh cmâ2 are obtained. Successively, newly elaborated bicomponent silicon/carbon nanostructures are fabricated in one step by alternating PLD deposition of Si and C, thus resulting in novel multi-layered composite mesoporous films exhibiting profoundly improved performance. Alternated deposition of Si/C layers by PLD is proven to be a straightforward method to produce multi-layered anodes in one processing step. The addition of carbon and mild annealing at 400 °C stabilize the electrochemical performance of the Si based nanostructures in lab-scale lithium cells, allowing to reach very stable prolonged reversible cycling at improved specific capacity values. This opens the way to further reducing processing steps and processing time, which are key aspects when upscaling is sought
Li1.4Al0.4Ge0.4Ti1.4(PO4)3 promising NASICON-structured glass-ceramic electrolyte for all-solid-state Li-based batteries: Unravelling the effect of diboron trioxide
Li-ion batteries (LIBs) are the ubiquitous technology to power portable electronics; however, for the next-generation of high-performing electrochemical energy storage systems for electric vehicles and smart grid facilities, breakthroughs are needed, particularly in the development of solid-state electrolytes, which may allow for enhanced energy density while enabling lithium metal anodes, combined with unrivalled safety and operative reliability. In this respect, here we present the successful synthesis of a glass-ceramic Li1.4Al0.4Ge0.4Ti1.4(PO4)3 NASICON-type solid-state electrolyte (SSE) through a melt-casting technique. Being grain boundaries crucial for the total ionic conductivity of SSEs, the effect of the addition of diboron trioxide (B2O3, 0.05 wt.%) to promote their liquefaction and restructuring is investigated, along with the effects on the resulting microstructures and ionic conductivities. By the thorough combination of structural-morphological and electrochemical techniques, we demonstrate that bulk materials show improved performance compared to their powder sintered counterpart, achieving remarkable ion mobility (> 0.1 mS cmâ1 at â10 °C) and anodic oxidation stability (> 4.8 V vs Li+/Li). The addition of B2O3 positively affects the grain cohesion and growth, thus reducing the extension of the grain boundaries (and the related grain/grain interface resistance) and, therefore, increasing the overall ion mobility. In addition, B2O3 is seen to contrast the microcracks formation in the LAGTP system under study which, overall, shows very promising prospects as SSE for the next-generation of high-energy density, safe lithium-based batteries
Photoanodes for Aqueous Solar Cells: Exploring Additives and Formulations Starting from a Commercial TiO2 Paste
Whereas the commercialization of dyeâsensitized solar cells (DSSCs) is finally proceeding taking advantage of their low cost and tunable optical features, such as colour and transparency for both indoor and buildingâintegrated applications, the corresponding aqueous counterpart is still at its infancy. As the TiO2 electrode is a fundamental component for hybrid solar cells, this work investigates the effect of different molecular (αâterpineol, propylene carbonate) and polymeric (polyethylene oxide, polyethylene glycol, carboxymethyl cellulose and xanthan gum) additives that can be introduced into a commercial TiO2 paste for for screenâprinting (or doctor blade). Among all, the addition of polyethylene glycol leads to the best cell performances, with markedly increased shortâcircuit current density (+18â%) and power conversion efficiency (+48â%) with respect to the pristine (commercial) counterpart. When further explored at different concentration levels, electrodes fabricated from polyethylene glycolâbased pastes show different morphologies, thicknesses and performances, which are investigated through (photo)electrochemical, structural, physicalâchemical and microscopic techniques
Photoanodes for Aqueous Solar Cells: Exploring Additives and Formulations Starting from a Commercial TiO2 Paste
Whereas the commercialization of dyeâsensitized solar cells (DSSCs) is finally proceeding taking advantage of their low cost and tunable optical features, such as colour and transparency for both indoor and buildingâintegrated applications, the corresponding aqueous counterpart is still at its infancy. As the TiO2 electrode is a fundamental component for hybrid solar cells, this work investigates the effect of different molecular (αâterpineol, propylene carbonate) and polymeric (polyethylene oxide, polyethylene glycol, carboxymethyl cellulose and xanthan gum) additives that can be introduced into a commercial TiO2 paste for for screenâprinting (or doctor blade). Among all, the addition of polyethylene glycol leads to the best cell performances, with markedly increased shortâcircuit current density (+18â%) and power conversion efficiency (+48â%) with respect to the pristine (commercial) counterpart. When further explored at different concentration levels, electrodes fabricated from polyethylene glycolâbased pastes show different morphologies, thicknesses and performances, which are investigated through (photo)electrochemical, structural, physicalâchemical and microscopic techniques
Photoanodes for Aqueous Solar Cells: Exploring Additives and Formulations Starting from a Commercial TiO2 Paste
Whereas the commercialization of dyeâsensitized solar cells (DSSCs) is finally proceeding taking advantage of their low cost and tunable optical features, such as colour and transparency for both indoor and buildingâintegrated applications, the corresponding aqueous counterpart is still at its infancy. As the TiO2 electrode is a fundamental component for hybrid solar cells, this work investigates the effect of different molecular (αâterpineol, propylene carbonate) and polymeric (polyethylene oxide, polyethylene glycol, carboxymethyl cellulose and xanthan gum) additives that can be introduced into a commercial TiO2 paste for for screenâprinting (or doctor blade). Among all, the addition of polyethylene glycol leads to the best cell performances, with markedly increased shortâcircuit current density (+18â%) and power conversion efficiency (+48â%) with respect to the pristine (commercial) counterpart. When further explored at different concentration levels, electrodes fabricated from polyethylene glycolâbased pastes show different morphologies, thicknesses and performances, which are investigated through (photo)electrochemical, structural, physicalâchemical and microscopic techniques
Recent advances in eco-friendly and cost-effective materials towards sustainable dye-sensitized solar cells
Dye-sensitized solar cells (DSSCs), as emerging photovoltaic technology, have been thoroughly and extensively investigated in the last three decades. Since their first appearance in 1991, DSSCs have gained increasing attention and have been classified as feasible alternatives to conventional photovoltaic devices due to their numerous advantages, such as cheap and simple preparation methods, the possibility of being integrated in buildings and astonishing performances under indoor and diffuse illumination conditions. Photoconversion efficiencies of up to 14% and 8% have been obtained for lab-scale devices and modules, respectively. Albeit the efforts made, these values seem arduous to be outdone, at least under simulated solar radiation. Nevertheless, recent lab-scale systems have demonstrated photoconversion efficiencies of up to 33% under indoor illumination (i.e. 1000 lux) leading to an actual Renaissance (or Revival) of these devices. It is worth mentioning that scientists in this field are developing innovative materials aiming at long-term and efficient devices, being the concept of sustainability often set apart. However, in light of effective commercialization of this technology, stability, efficiency and sustainability should be considered as the essential keywords. Nowadays, DSSCs are finding a ânew way backâ towards sustainability and rather a huge number of reports have focused on the preparation of green and cost-effective materials to replace the standard ones. In this scenario, the present review aims to give an overview of the most adopted strategies to enhance the sustainability of materials in classical DSSC components (e.g. sensitizer, redox couple, electrolyte and counter-electrode), including smart synthesis and deposition procedures, which currently represent utmost important topics in the scientific community
- âŠ