179,176 research outputs found
Computer program provides improved longitudinal response analysis for axisymmetric launch vehicles
Computer program calculates axisymmetric launch vehicle steady-state response to axisymmetric sinusoidal loads. A finite element technique is utilized to construct the total launch vehicle stiffness matrix and mass matrix by subdividing the prototype structure into a set of axisymmetric shell components, fluid components, and spring-mass components
Electric propulsion for near-Earth space missions
A set of missions was postulated that was considered to be representative of those likely to be desirable/feasible over the next three decades. The characteristics of these missions, and their payloads, that most impact the choice/design of the requisite propulsion system were determined. A system-level model of the near-Earth transportation process was constructed, which incorporated these mission/system characteristics, as well as the fundamental parameters describing the technology/performance of an ion bombardment based electric propulsion system. The model was used for sensitivity studies to determine the interactions between the technology descriptors and program costs, and to establish the most cost-effective directions for technology advancement. The most important factor was seen to be the costs associated with the duration of the mission, and this in turn makes the development of advanced electric propulsion systems having moderate to high efficiencies ( 50 percent) at intermediate ranges of specific impulse (approximately 1000 seconds) very desirable
Topological phase transitions driven by next-nearest-neighbor hopping in two-dimensional lattices
For two-dimensional lattices in a tight-binding description, the intrinsic
spin-orbit coupling, acting as a complex next-nearest-neighbor hopping, opens
gaps that exhibit the quantum spin Hall effect. In this paper, we study the
effect of a real next-nearest-neighbor hopping term on the band structure of
several Dirac systems. In our model, the spin is conserved, which allows us to
analyze the spin Chern numbers. We show that in the Lieb, kagome, and T_3
lattices, variation of the amplitude of the real next-nearest-neighbor hopping
term drives interesting topological phase transitions. These transitions may be
experimentally realized in optical lattices under shaking, when the ratio
between the nearest- and next-nearest-neighbor hopping parameters can be tuned
to any possible value. Finally, we show that in the honeycomb lattice,
next-nearest-neighbor hopping only drives topological phase transitions in the
presence of a magnetic field, leading to the conjecture that these transitions
can only occur in multigap systems.Comment: 10 pages, 9 figures [erratum: corrected colors in Fig. 7(a)
Debris control design achievements of the booster separation motors
The stringent debris control requirements imposed on the design of the Space Shuttle booster separation motor are described along with the verification program implemented to ensure compliance with debris control objectives. The principal areas emphasized in the design and development of the Booster Separation Motor (BSM) relative to debris control were the propellant formulation and nozzle closures which protect the motors from aerodynamic heating and moisture. A description of the motor design requirements, the propellant formulation and verification program, and the nozzle closures design and verification are presented
Water velocity meter
Simple, inexpensive drag sphere velocity meter with a zero to 6 ft/sec range measures steady-state flow. When combined with appropriate data acquisition system, it is suited to applications where large numbers of simultaneous measurements are needed for current mapping or velocity profile determination
The application of CFD for military aircraft design at transonic speeds
Numerous computational fluid dynamics (CFD) codes are available that solve any of several variations of the transonic flow equations from small disturbance to full Navier-Stokes. The design philosophy at General Dynamics Fort Worth Division involves use of all these levels of codes, depending on the stage of configuration development. Throughout this process, drag calculation is a central issue. An overview is provided for several transonic codes and representative test-to-theory comparisons for fighter-type configurations are presented. Correlations are shown for lift, drag, pitching moment, and pressure distributions. The future of applied CFD is also discussed, including the important task of code validation. With the progress being made in code development and the continued evolution in computer hardware, the routine application of these codes for increasingly more complex geometries and flow conditions seems apparent
Application of the vortex-lattice technique to the analysis of thin wings with vortex separation and thick multi-element wings
Two techniques for extending the range of applicability of the basic vortex-lattice method are discussed. The first improves the computation of aerodynamic forces on thin, low-aspect-ratio wings of arbitrary planforms at subsonic Mach numbers by including the effects of leading-edge and tip vortex separation, characteristic of this type wing, through use of the well-known suction-analogy method of E. C. Polhamus. Comparisons with experimental data for a variety of planforms are presented. The second consists of the use of the vortex-lattice method to predict pressure distributions over thick multi-element wings (wings with leading- and trailing-edge devices). A method of laying out the lattice is described which gives accurate pressures on the top and part of the bottom surface of the wing. Limited comparisons between the result predicted by this method, the conventional lattice arrangement method, experimental data, and 2-D potential flow analysis techniques are presented
Rotorcraft research testing in the National Full-Scale Aerodynamics Complex at NASA Ames Research Center
The unique capabilities of the National Full-Scale Aerodynamics Complex (NFAC) for testing rotorcraft systems are described. The test facilities include the 40- by 80-Foot Wind Tunnel, the 80- by 120-Foot Wind Tunnel, and the Outdoor Aerodynamic Research Facility. The Ames 7- by 10-Foot Subsonic Wind Tunnel is also used in support of the rotor research programs conducted in the NFAC. Detailed descriptions of each of the facilities, with an emphasis on helicopter rotor test capability, are presented. The special purpose rotor test equipment used in conducting helicopter research is reviewed. Test rigs to operate full-scale helicopter main rotors, helicopter tail rotors, and tilting prop-rotors are available, as well as full-scale and small-scale rotor systems for use in various research programs. The test procedures used in conducting rotor experiments are discussed together with representative data obtained from previous test programs. Specific examples are given for rotor performance, loads, acoustics, system interactions, dynamic and aeroelastic stability, and advanced technology and prototype demonstration models
The structure of correlation tensors in homogeneous anisotropic turbulence
The study of turbulence with spatially homogeneous but anisotropic statistical properties has applications in space physics and laboratory plasma physics. The first step in the systematic study of such fluctuations is the elucidation of the kinematic properties of the relevant statistical objects, which are the correlation tensors. The theory of isotropic tensors, developed by Robertson, Chandrasekhar and others, is reviewed and extended to cover the general case of turbulence with a pseudo-vector preferred direction, without assuming mirror reflection invariance. Attention is focused on two point correlation functions and it is shown that the form of the decomposition into proper and pseudo-tensor contributions is restricted by the homogeneity requirement. It is also shown that the vector and pseudo-vector preferred direction cases yield different results. An explicit form of the two point correlation tensor is presented which is appropriate for analyzing interplanetary magnetic fluctuations. A procedure for determining the magnetic helicity from experimental data is presented
- …