4,306 research outputs found

    Spitzer/MIPS Imaging of NGC 650: Probing the History of Mass Loss on the Asymptotic Giant Branch

    Get PDF
    We present the far-infrared (IR) maps of a bipolar planetary nebula (PN), NGC 650, at 24, 70, and 160 micron taken with the Multiband Imaging Photometer for Spitzer (MIPS) on-board the Spitzer Space Telescope. While the two-peak emission structure seen in all MIPS bands suggests the presence of a near edge-on dusty torus, the distinct emission structure between the 24 micron map and the 70/160 micron maps indicates the presence of two distinct emission components in the central torus. Based on the spatial correlation of these two far-IR emission components with respect to various optical line emission, we conclude that the 24 micron emission is largely due to the [O IV] line at 25.9 micron arising from highly ionized regions behind the ionization front, whereas the 70 and 160 micron emission is due to dust continuum arising from low-temperature dust in the remnant asymptotic giant branch (AGB) wind shell. The far-IR nebula structure also suggests that the enhancement of mass loss at the end of the AGB phase has occurred isotropically, but has ensued only in the equatorial directions while ceasing in the polar directions. The present data also show evidence for the prolate spheroidal distribution of matter in this bipolar PN. The AGB mass loss history reconstructed in this PN is thus consistent with what has been previously proposed based on the past optical and mid-IR imaging surveys of the post-AGB shells.Comment: 9 pages in the emulated ApJ format with 6 figures, to appear in Ap

    Manipulating models and grasping the ideas they represent

    Get PDF
    This article notes the convergence of recent thinking in neuroscience and grounded cognition regarding the way we understand mental representation and recollection: ideas are dynamic and multi-modal, actively created at the point of recall. Also, neurophysiologically, re-entrant signalling among cortical circuits allows non-conscious processing to support our deliberative thoughts and actions. The qualitative research we describe examines the exchanges occurring during semi-structured interviews with 360 children age 3–13, including 294 from New Zealand (158 boys, 136 girls) and 66 from China (34 boys, 32 girls) concerning their understanding of the shape and motion of the Earth, Sun and Moon (ESM). We look closely at the relationships between what is revealed as children manipulate their own play-dough models and their apparent understandings of ESM concepts. In particular, we focus on the switching taking place between what is said, what is drawn and what is modelled. The evidence is supportive of Edelman’s view that memory is non-representational and that concepts are the outcome of perceptual mappings, a view which is also in accord with Barsalou’s notion that concepts are simulators or skills which operate consistently across several modalities. Quantitative data indicate that the dynamic structure of memory/concept creation is similar in both genders and common to the cultures/ethnicities compared (New Zealand European and Māori; Chinese Han) and that repeated interviews in this longitudinal research lead to more advanced modelling skills and/or more advanced shape and motion concepts, the results supporting hypotheses (Kolmogorov–Smirnov alpha levels.05; rs: p < .001)

    Design of an Automated Ultrasonic Scanning System for In-Situ Composite Cure Monitoring and Defect Detection

    Get PDF
    The preliminary design and development of an automated ultrasonic scanning system for in-situ composite cure monitoring and defect detection in the high temperature environment of an oven was completed. This preliminary design is a stepping stone to deployment in the high temperature and high pressure environment of an autoclave, the primary cure method of aerospace grade thermoset composites. Cure monitoring with real-time defect detection during the process could determine when defects form and how they move. In addition, real-time defect detection during cure could assist validating physics-based process models for predicting defects at all stages of the cure cycle. A physics-based process model for predicting porosity and fiber waviness originating during cure is currently under development by the NASA Advanced Composites Project (ACP). For the design, an ultrasonic contact scanner is enclosed in an insulating box that is placed inside an oven during cure. Throughout the cure cycle, the box is nitrogen-cooled to approximately room temperature to maintain a standard operating environment for the scanner. The composite part is mounted on the outside of the box in a vacuum bag on the build/tool plate. The build plate is attached to the bottom surface of the box. The scanner inspects the composite panel through the build plate, tracking the movement of defects introduced during layup and searching for new defects that may form during cure. The focus of this paper is the evaluation and selection of the build plate material and thickness. The selection was based on the required operating temperature of the scanner, the cure temperature of the composite material, thermal conductivity models of the candidate build plates, and a series of ultrasonic attenuation tests. This analysis led to the determination that a 63.5 mm thick build plate of borosilicate glass would be utilized for the system. The borosilicate glass plate was selected as the build plate material due to the low ultrasonic attenuation it demonstrated, its ability to efficiently insulate the scanner while supporting an elevated temperature on the part side of the plate, and the availability of a 63.5 mm thick plate without the need for lamination

    Response to comment on "solid recovered fuel: Materials flow analysis and fuel property development during the mechanical processing of biodried waste"

    Get PDF
    Laner and Cencic1 comment on Velis et al. (2013)2 clarifying certain points on the use of the material flow analysis (MFA) software STAN3. We welcome the correspondence and the opportunity this exchange provides to discuss optimal approaches to using STAN. In keeping with Velis et al.2 these physically impossible, and otherwise insignificant, negative flows have enabled improvements to STAN. Here, we elaborate on the practicalities of using STAN in our research and on the correctness and validation of our results, notwithstanding the inclusion of negative flows. We explain the contribution of our approach to solid waste management and resource recovery

    An introduction to quantum gravity

    Full text link
    After an overview of the physical motivations for studying quantum gravity, we reprint THE FORMAL STRUCTURE OF QUANTUM GRAVITY, i.e. the 1978 Cargese Lectures by Professor B.S. DeWitt, with kind permission of Springer. The reader is therefore introduced, in a pedagogical way, to the functional integral quantization of gravitation and Yang-Mills theory. It is hoped that such a paper will remain useful for all lecturers or Ph.D. students who face the task of introducing (resp. learning) some basic concepts in quantum gravity in a relatively short time. In the second part, we outline selected topics such as the braneworld picture with the same covariant formalism of the first part, and spectral asymptotics of Euclidean quantum gravity with diffeomorphism-invariant boundary conditions. The latter might have implications for singularity avoidance in quantum cosmology.Comment: 68 pages, Latex file. Sections from 2 to 17 are published thanks to kind permission of Springe
    corecore