3,938 research outputs found
Biosolids-based catalyst for oxidative desulphurization of drop-in fuels derived from waste fats
In this work, the catalytic performance of a biosolids-based catalyst was tested in the oxidative desulphurization process of a model fuel solution containing benzothiophene ([S] of 500 ppm), as well as sulphur-rich products from a two-step thermal conversion process of brown grease to renewable hydrocarbons using biosolids as a water replacement during the hydrolysis step. The catalytic results of the biosolids-based material were compared with a classical Fenton-like reagent and a non-catalytic system. Biosolids-based catalyst outperformed the other systems at low temperature with a full desulphurization of benzothiophene solution achieved at 60 °C after 3 h and a good recyclability after four catalytic runs at 80 °C for 3 h. The desulphurization was less effective for hydrolysed fatty acids and crude pyrolysis oil derived from the conversion of brown grease to renewable hydrocarbons, which was due to the composition of the sulphur containing compounds, but still reached 87.7 ± 3.0 % and 74.7 ± 9.5 %, respectively
A variant of the Mukai pairing via deformation quantization
We give a new method to prove a formula computing a variant of Caldararu's
Mukai pairing \cite{Cal1}. Our method is based on some important results in the
area of deformation quantization. In particular, part of the work of Kashiwara
and Schapira in \cite{KS} as well as an algebraic index theorem of Bressler,
Nest and Tsygan in \cite{BNT},\cite{BNT1} and \cite{BNT2} are used. It is hoped
that our method is useful for generalization to settings involving certain
singular varieties.Comment: 8 pages. Comments and suggestions welcom
Simulation of gain stability of THGEM gas-avalanche particle detectors
Charging-up processes affecting gain stability in Thick Gas Electron
Multipliers (THGEM) were studied with a dedicated simulation toolkit.
Integrated with Garfield++, it provides an effective platform for systematic
phenomenological studies of charging-up processes in MPGD detectors. We
describe the simulation tool and the fine-tuning of the step-size required for
the algorithm convergence, in relation to physical parameters. Simulation
results of gain stability over time in THGEM detectors are presented, exploring
the role of electrode-thickness and applied voltage on its evolution. The
results show that the total amount of irradiated charge through electrode's
hole needed for reaching gain stabilization is in the range of tens to hundreds
of pC, depending on the detector geometry and operational voltage. These
results are in agreement with experimental observations presented previously
The Resistive-Plate WELL with Argon mixtures - a robust gaseous radiation detector
A thin single-element THGEM-based, Resistive-Plate WELL (RPWELL) detector was
operated with 150 GeV/c muon and pion beams in Ne/(5%CH), Ar/(5%CH) and
Ar/(7%CO); signals were recorded with 1 cm square pads and SRS/APV25
electronics. Detection efficiency values greater than 98% were reached in all
the gas mixtures, at average pad multiplicity of 1.2. The use of the
10{\Omega}cm resistive plate resulted in a completely discharge-free
operation also in intense pion beams. The efficiency remained essentially
constant at 98-99% up to fluxes of 10Hz/cm, dropping by a few %
when approaching 10 Hz/cm. These results pave the way towards
cost-effective, robust, efficient, large-scale detectors for a variety of
applications in future particle, astro-particle and applied fields. A potential
target application is digital hadron calorimetry.Comment: presented at the 2016 VIenna Conf. On instrumentation. Submitted to
the Conference proceeding
First in-beam studies of a Resistive-Plate WELL gaseous multiplier
We present the results of the first in-beam studies of a medium size
(1010 cm) Resistive-Plate WELL (RPWELL): a single-sided THGEM
coupled to a pad anode through a resistive layer of high bulk resistivity
(10cm). The 6.2~mm thick (excluding readout electronics)
single-stage detector was studied with 150~GeV muons and pions. Signals were
recorded from 11 cm square copper pads with APV25-SRS readout
electronics. The single-element detector was operated in Ne\(5%
) at a gas gain of a few times 10, reaching 99
detection efficiency at average pad multiplicity of 1.2. Operation at
particle fluxes up to 10 Hz/cm resulted in 23 gain drop
leading to 5 efficiency loss. The striking feature was the
discharge-free operation, also in intense pion beams. These results pave the
way towards robust, efficient large-scale detectors for applications requiring
economic solutions at moderate spatial and energy resolutions.Comment: Accepted by JINS
Multiple Core-Hole Coherence in X-Ray Four-Wave-Mixing Spectroscopies
Correlation-function expressions are derived for the coherent nonlinear
response of molecules to three resonant ultrafast pulses in the x-ray regime.
The ability to create two-core-hole states with controlled attosecond timing in
four-wave-mixing and pump probe techniques should open up new windows into the
response of valence electrons, which are not available from incoherent x-ray
Raman and fluorescence techniques. Closed expressions for the necessary
four-point correlation functions are derived for the electron-boson model by
using the second order cumulant expansion to describe the fluctuating
potentials. The information obtained from multidimensional nonlinear techniques
could be used to test and refine this model, and establish an anharmonic
oscillator picture for electronic excitations
Structural analysis of ultrafast extended x-ray absorption fine structure with subpicometer spatial resolution: Application to spin crossover complexes
We present a novel analysis of time-resolved extended x-ray absorption fine structure (EXAFS) spectra based on the fitting of the experimental transients obtained from optical pump/x-ray probe experiments. We apply it to the analysis of picosecond EXAFS data on aqueous [FeII (bpy)3] 2+, which undergoes a light induced conversion from its low-spin (LS) ground state to the short-lived (τ≈650 ps) excited high-spin (HS) state. A series of EXAFS spectra were simulated for a collection of possible HS structures from which the ground state fit spectrum was subtracted to generate transient difference absorption (TA) spectra. These are then compared with the experimental TA spectrum using a least-squares statistical analysis to derive the structural change. This approach reduces the number of required parameters by cancellation in the differences. It also delivers a unique solution for both the fractional population and the extracted excited state structure. We thus obtain a value of the Fe-N bond elongation in the HS state with subpicometer precision (0.203±0.008 Å). © 2009 American Institute of Physics.This work was funded by the Swiss National Science Foundation via Contract Nos. 620–066145, 200021–107956, PP002–110464, 200020–116023, 200021–105239, and 200020-116533.Peer Reviewe
- …