147 research outputs found

    Optimisation and application of ICP-MS and alpha-spectrometry for determination of isotopic ratios of depleted uranium and plutonium in samples collected in Kosovo

    Get PDF
    The determination of environmental contamination with natural and artificial actinide isotopes and evaluation of their source requires precise isotopic determination of actinides, above all uranium and plutonium. This can be achieved by alpha spectrometry or by inductively coupled plasma mass spectrometry (ICP-MS) after chemical separation of actinides. The performance of a sector-field ICP-MS (ICP-SFMS) coupled to a low-flow micronebulizer with a membrane desolvation unit, "Aridus'', was studied with respect to precise isotopic measurements of uranium and plutonium at the ultratrace level. The UH+/U+ formation rate was about 3x10(-5) and a sensitivity for U-238 of up to 4x10(9) counts s(-1) ppm(-1) was achieved. The limit of quantification (LOQ, 10s) for U-236 and Pu-239 using the experimental arrangement described above was 0.6 pg l(-1) in aqueous solution and 0.13 pg g(-1) in soil, respectively. ICP-SFMS was used in comparison to alpha spectrometry to measure the U and Pu concentrations and isotopic compositions in two soil samples and in one penetrator collected in Kosovo. ICP-MS permitted the determination of U and Pu isotope ratios including the U-236 abundance and Pu-240/Pu-239 ratio at ultratrace levels in soil samples of up to 0.1 g. Depleted uranium (U-235/U-238= 0.00202 +/-0.00001) was determined in one penetrator and one soil sample. Pu concentrations of (5.5 +/-0.1) x 10(-13) g g(-1) and (4.4 +/-0.5) x 10(-13) g g(-1) (Pu-240/Pu-239=0.35 +/-0.10 and 0.27 +/-0.07, respectively) were found in both soil samples from Kosovo. Besides plutonium, U-236 (3.1x10(-5) g g(-1)) and Am-241 (1.7x10(-12) g g(-1)) were also detected in the penetrator sample, which indicates the previous existence of neutron-related processes and points to a possible presence of spent reactor uranium in munitions. However, the most probable plutonium contamination sources in analyzed soil samples from Kosovo are mixed fallout including spent reactor fuel due to the Chernobyl nuclear power plant accident in 1986 and plutonium due to nuclear weapon tests. Additional plutonium contamination could not be determined in the Kosovo soil sample containing depleted uranium with a detection limit of about 10(-13) g g(-1)

    Direct determination of trace elements in powdered samples by in-cell isotope dilution femtosecond laser ablation ICPMS

    Get PDF
    A method has been developed for the direct and simultaneous multielement determination of Cu, Zn, Sn, and Pb in soil and sediment samples using femtosecond laser ablation inductively coupled plasma mass spectrometry (fs-LA-ICPMS) in combination with isotope dilution mass spectrometry (IDMS). The in-cell isotope dilution fs-LA-ICPMS method proposed in this work was based on the quasi-simultaneous ablation of the natural abundance sample and the isotopically enriched solid spike, which was performed using a high repetition rate laser and a fast scanning beam device in a combined manner. Both the sample preparation procedure and the total analysis time have been drastically reduced, in comparison with previous approaches, since a unique multielement isotopically enriched solid spike was employed to analyze different powdered samples. Numerous experimental parameters were carefully selected (e.g., carrier gas flow rate, inlet diameter of the ablation cell, sample translation speed, scanner speed, etc.) in order to ensure the complete mixing between the sample and the solid spike aerosols. The proposed in-cell fs-LA-ICP-IDMS method was tested for the analysis of two soil (CRM 142R, GBW-07405) and two sediment (PACS-2, IAEA-405) reference materials, and the analysis of Cu, Zn, Sn, and Pb yielded good agreement of usually not more than 10% deviation from the certified values and precisions of less than 15% relative standard deviation. Furthermore, the concentrations were in agreement not only with the certified values but also with those obtained by ICP-IDMS after the microwave-assisted digestion of the solid samples, demonstrating therefore that in-cell fs-LA-ICP-IDMS opens the possibility for accurate and precise determinations of trace elements in powdered samples reducing the total sample preparation time to less than 5 min. Additionally, scanning electron microscope measurements showed that the aerosol generated by in-cell fs-LA-ICP-IDMS predominantly consisted of linear agglomerates of small particles (in the order of few tens of nanometers) and a few large spherical particles with diameters below 225 nm

    Evaluation strategies for isotope ratio measurements of single particles by LA-MC-ICPMS

    Get PDF
    Data evaluation is a crucial step when it comes to the determination of accurate and precise isotope ratios computed from transient signals measured by multi-collector–inductively coupled plasma mass spectrometry (MC-ICPMS) coupled to, for example, laser ablation (LA). In the present study, the applicability of different data evaluation strategies (i.e. ‘point-by-point’, ‘integration’ and ‘linear regression slope’ method) for the computation of (235)U/(238)U isotope ratios measured in single particles by LA-MC-ICPMS was investigated. The analyzed uranium oxide particles (i.e. 9073-01-B, CRM U010 and NUSIMEP-7 test samples), having sizes down to the sub-micrometre range, are certified with respect to their (235)U/(238)U isotopic signature, which enabled evaluation of the applied strategies with respect to precision and accuracy. The different strategies were also compared with respect to their expanded uncertainties. Even though the ‘point-by-point’ method proved to be superior, the other methods are advantageous, as they take weighted signal intensities into account. For the first time, the use of a ‘finite mixture model’ is presented for the determination of an unknown number of different U isotopic compositions of single particles present on the same planchet. The model uses an algorithm that determines the number of isotopic signatures by attributing individual data points to computed clusters. The (235)U/(238)U isotope ratios are then determined by means of the slopes of linear regressions estimated for each cluster. The model was successfully applied for the accurate determination of different (235)U/(238)U isotope ratios of particles deposited on the NUSIMEP-7 test samples. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s00216-012-6674-3) contains supplementary material, which is available to authorized users

    Trends in Environmental Analysis

    Full text link

    Improvement of abundance sensitivity in a quadrupole-based ICP-MS instrument with a hexapole collision cell

    Get PDF
    First published as an Advance Article on the web 3rd July 2002 High isotopic abundance sensitivity is desirable for the measurement of low-abundance isotopes in the presence of neighboring high-abundance isotopes. This is of interest when analyzing ultra low concentrations of trace elements or isotopes in the presence of elements or isotopes with much higher concentrations (e.g., radionuclides included in a matrix of stable isotopes). In this study, a quadrupole-based inductively coupled plasma mass spectrometer with a hexapole collision cell (ICP-CC-QMS), Platform ICP (Micromass UK), was used to study the improvement of abundance sensitivity using uranium and lutetium as examples. The median kinetic energy of 238U1 ions was about 1.2 eV and 0.9 eV when helium was introduced as a collision gas at flow rates of 5 ml min21 and 10 ml min21, respectively. In the latter case, the proportion of ions with relatively high energy decreased significantly, which improved both the transmission of ions through the hexapole collision cell and mass selection by the quadrupole mass spectrometer. When introducing helium into the collision cell a reduction in peak tail of high-abundance isotopes by up to three orders of magnitude, depending on the mass analyzed, was observed. The abundance sensitivity for 236U/238U isotope ratio was improved fro

    Determination of 129I/127I isotope ratios in liquid solutions and environmental soil samples by ICP-MS with hexapole collision cell

    Get PDF
    The determination of I-129 in environmental samples at ultratrace levels is very difficult by ICP-MS due to a high noise caused by Xe impurities in argon plasma gas (interference of Xe-129(+)), possible (IH2+)-I-127 interference and an insufficient abundance ratio sensitivity of the ICP mass spectrometer for I-129/I-127 isotope ratio measurement. A sensitive, powerful and fast analytical technique for iodine isotope ratio measurements in aqueous solutions and contaminated soil samples directly without sample preparation using ICP-MS with a hexapole collision cell (ICP-CC-QMS) was developed. Oxygen is used as reaction and carrier gas for iodine thermal desorption via the gas phase from solid environmental material in the sample introduction device coupled on-line to ICP-CC-QMS. A mixture of oxygen and helium as reaction gases in the hexapole collision cell was applied for reducing disturbing background intensity of Xe-129(+). After optimization of measurement procedures the detection limit for I-129(+) in aqueous solution was 8x10(-13) g ml(-1), which is better by about two orders of magnitude in comparison to the detection limit for I-129(+) in sector field ICP-MS. The detection limit for direct I-129(+) determination in contaminated environmental (soil) samples via gas-phase desorption without any additional sample preparation was 3x10(-11) g g(-1) (30 ppt). Furthermore, the results of the determination of I-129/I-127 isotope ratios at the 10(-5)-10(-6) level in synthetic laboratory standards and environmental soil samples from contaminated areas are given
    • …
    corecore